AMD Radeon RX 7800 XT vs NVIDIA H20 NVL16 Comparison
AMD Radeon RX 7800 XT
H20 NVL16
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7800 XT vs NVIDIA H20 NVL16
Head-to-Head Benchmarks
The recorded data presents an unusual comparison scenario. The AMD Radeon RX 7800 XT has a full set of benchmark results across ten different tests, while the NVIDIA H20 NVL16 has no individual benchmark entries in the database. This absence of recorded measurements for the H20 NVL16 means there are no direct head-to-head scores to compare between the two cards. The RX 7800 XT's average benchmark score stands at 11,627 points, placing it in the 51st percentile of all GPUs tracked. The H20 NVL16, by contrast, has an average benchmark score of 0 with a 50th percentile ranking, which reflects the complete lack of test data rather than actual performance equivalence.
The RX 7800 XT's individual results show a wide spread across different workload types. Its strongest showing comes in the Geekbench Vulkan test at 54,228 points, followed by Passmark G3D at 24,176 points. The OpenCL score reaches 18,290 points, while Passmark GPU Compute records 13,473 points. Legacy DirectX tests tell a different story, with DirectX 9 scoring 304, DirectX 11 scoring 249, DirectX 10 scoring 121, and DirectX 12 scoring only 93. The 2D graphics test produces 1,177 points, while the 3DMark Steel Nomad DX12 test yields 4,157 points.
Because the H20 NVL16 has no benchmark entries, the database cannot establish any comparative wins or losses between the two products. The head-to-head benchmark array is empty, and both the wins and losses counters show zero for each side. This is a case where the absence of data is itself the most informative finding: the H20 NVL16 is a server accelerator with no display outputs and no supported graphics APIs, so it was evidently never subjected to the consumer-oriented benchmark suite used for the RX 7800 XT. The RX 7800 XT's nearest rivals in the database, based on average score, are the NVIDIA GeForce GTX 1660 at 11,680 points (0.5% higher), the AMD Radeon RX 6500 XT at 11,842 points (1.8% higher), the AMD Radeon Pro 5500M at 11,528 points (0.9% lower), and the NVIDIA Tesla K20c at 11,479 points (1.3% lower). These comparisons place the RX 7800 XT in a tightly clustered performance band among these specific GPUs, though the delta percentages are all within a narrow 1.8% range.
Architecture Differences
The two cards come from fundamentally different architectural lineages. The AMD Radeon RX 7800 XT uses the Navi 32 chip built on RDNA 3.0 architecture, codenamed Wheat Nas, and belongs to the Navi III generation within the RX 7000 series. The NVIDIA H20 NVL16 uses the GH100 chip built on Hopper architecture and belongs to the Server Hopper generation. Both are manufactured on a 5 nm process at TSMC, but the transistor counts diverge sharply. The RX 7800 XT contains 28,100 million transistors on a 346 mm² die, yielding a transistor density of 81.2 million per square millimeter. The H20 NVL16 packs 80,000 million transistors onto a 814 mm² die, achieving a density of 98.3 million per square millimeter. The H20 NVL16's die is more than twice the physical size and carries nearly three times the transistor count.
The compute pipelines reflect their different purposes. The RX 7800 XT has 3,840 shading units, 240 texture mapping units, 96 raster output units, and 60 ray tracing cores. It has no tensor cores. The H20 NVL16 has 9,984 shading units, 312 texture mapping units, and only 24 raster output units, but it carries 312 tensor cores and has no dedicated ray tracing cores listed. The pixel rate tells a surprising story: the RX 7800 XT achieves 233.3 GPixel/s against the H20 NVL16's 47.52 GPixel/s, a difference driven by the H20 NVL16's minimal ROP count. Texture rates are closer, with the RX 7800 XT at 583.2 GTexel/s and the H20 NVL16 at 617.8 GTexel/s.
Clock speeds show the RX 7800 XT running higher frequencies. Its base clock is 1,295 MHz with a boost of 2,430 MHz and a game clock of 2,124 MHz. The H20 NVL16 has a base of 1,830 MHz and a boost of 1,980 MHz, with no game clock defined. The H20 NVL16's base clock is substantially higher than the RX 7800 XT's, but its boost ceiling is lower. Floating point throughput favors the H20 NVL16 in raw terms: 39.54 TFLOPS FP32 versus 37.32 TFLOPS for the RX 7800 XT. For FP16, the H20 NVL16 delivers 79.07 TFLOPS at a 2:1 ratio, while the RX 7800 XT delivers 37.32 TFLOPS at a 1:1 ratio. The H20 NVL16's FP16 capability is more than double that of the RX 7800 XT.
Where Each One Wins
The RX 7800 XT wins decisively in any graphics-oriented workload that requires rasterization, ray tracing, or display output. Its 96 ROPs enable 233.3 GPixel/s fill rates, nearly five times the H20 NVL16's 47.52 GPixel/s. The card supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, and it includes display outputs with 1x HDMI 2.1a and 3x DisplayPort 2.1. The H20 NVL16 has no display outputs and lists N/A for DirectX, OpenGL, and Vulkan support. Any benchmark that depends on graphics API calls will only run on the RX 7800 XT.
The H20 NVL16 wins in memory capacity and bandwidth. Its 96 GB of HBM3 memory on a 6,144-bit bus delivers 4.03 TB/s of bandwidth, compared to the RX 7800 XT's 16 GB of GDDR6 on a 256-bit bus at 624.1 GB/s. That is roughly 6.5 times the bandwidth and six times the capacity. For workloads that fit within large memory pools or require sustained memory throughput, the H20 NVL16 is the clear choice. Its 312 tensor cores also give it a hardware advantage for matrix operations, even though no specific tensor benchmarks appear in the database.
The H20 NVL16 also wins on raw FP16 compute, delivering 79.07 TFLOPS versus 37.32 TFLOPS for the RX 7800 XT. This suggests a meaningful advantage for half-precision workloads such as neural network inference or training, where FP16 throughput matters more than rasterization speed. The H20 NVL16's FP32 output of 39.54 TFLOPS also edges out the RX 7800 XT's 37.32 TFLOPS, though by a smaller margin.
Specification Differences
The two cards differ in nearly every measurable specification. Memory size: 16 GB for the RX 7800 XT, 96 GB for the H20 NVL16. Memory type: GDDR6 versus HBM3. Bus width: 256 bit versus 6,144 bit. Memory bandwidth: 624.1 GB/s versus 4.03 TB/s. Shading units: 3,840 versus 9,984. TMUs: 240 versus 312. ROPs: 96 versus 24. The RX 7800 XT has 60 ray tracing cores and no tensor cores; the H20 NVL16 has 312 tensor cores and no ray tracing cores listed.
Power requirements differ substantially. The RX 7800 XT has a TDP of 263 W with a suggested PSU of 600 W, while the H20 NVL16 has a TDP of 400 W with a suggested PSU of 800 W. The RX 7800 XT uses 2x 8-pin power connectors and occupies a dual-slot form factor; the H20 NVL16 is an SXM module with no power connectors listed. The bus interface also differs: PCIe 4.0 x16 for the RX 7800 XT, PCIe 5.0 x16 for the H20 NVL16.
The RX 7800 XT has physical dimensions of 267 mm length, 111 mm height, and 50 mm width, while the H20 NVL16 has no recorded dimensions. Release dates are nearly two years apart: the RX 7800 XT launched on 2023-09-05, and the H20 NVL16 on 2025-09-01. The RX 7800 XT has a launch MSRP of 499 USD; the H20 NVL16 has no launch MSRP recorded. The RX 7800 XT's predecessor is Navi II and its successor is Navi IV, while the H20 NVL16's predecessor is Server Ada and its successor is Server Blackwell. Both are currently listed as active in production.
FAQ
Q: Which card has higher FP32 compute performance?
A: The NVIDIA H20 NVL16 delivers 39.54 TFLOPS FP32, which is slightly higher than the AMD Radeon RX 7800 XT's 37.32 TFLOPS.
Q: What memory configuration does each card use?
A: The RX 7800 XT uses 16 GB of GDDR6 on a 256-bit bus with 624.1 GB/s bandwidth. The H20 NVL16 uses 96 GB of HBM3 on a 6,144-bit bus with 4.03 TB/s bandwidth.
Q: Does the H20 NVL16 support DirectX or Vulkan?
A: No, the H20 NVL16 lists N/A for DirectX, OpenGL, and Vulkan support. It has no display outputs. The RX 7800 XT supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.
Q: Which card has more shading units?
A: The H20 NVL16 has 9,984 shading units, more than double the RX 7800 XT's 3,840 shading units.
Q: What are the power requirements for each card?
A: The RX 7800 XT has a TDP of 263 W and suggests a 600 W PSU. The H20 NVL16 has a TDP of 400 W and suggests an 800 W PSU.
Q: Which card has tensor cores?
A: Only the H20 NVL16 has tensor cores, with 312 units. The RX 7800 XT has no tensor cores but includes 60 ray tracing cores, which the H20 NVL16 lacks.
Q: What is the transistor count difference?
A: The H20 NVL16 has 80,000 million transistors on an 814 mm² die, while the RX 7800 XT has 28,100 million transistors on a 346 mm² die.
The Verdict
The benchmark data makes one point clear: these two products serve entirely different markets. The AMD Radeon RX 7800 XT is a consumer graphics card with full display output support, a complete graphics API stack, and measured benchmark scores across ten tests. Its average score of 11,627 points and 51st percentile ranking place it among typical mid-range consumer GPUs. The NVIDIA H20 NVL16 is a server accelerator with no display outputs, no graphics API support, and zero recorded benchmark scores. Its 50th percentile ranking with an average score of 0 reflects the absence of applicable benchmarks rather than a performance assessment.
For anyone building a workstation or gaming system that needs rasterization, ray tracing, or display connectivity, the RX 7800 XT is the only viable option between these two. Its 233.3 GPixel/s pixel rate, 60 ray tracing cores, and 3x DisplayPort 2.1 outputs make it a functional graphics solution. The H20 NVL16 cannot output video at all.
For compute-intensive workloads that require massive memory capacity, the H20 NVL16's 96 GB of HBM3 at 4.03 TB/s bandwidth provides a scale of memory resources that the RX 7800 XT cannot approach. Its 312 tensor cores and 79.07 TFLOPS FP16 throughput indicate a design optimized for matrix mathematics and half-precision computation. The RX 7800 XT's FP16 output matches its FP32 at 37.32 TFLOPS, which is less than half of the H20 NVL16's FP16 capability.
The data does not support a single winner. It supports a clear division: the RX 7800 XT for graphics and display workloads, the H20 NVL16 for server-side memory-intensive and tensor-based computation. The transistor counts reinforce this split. The H20 NVL16's 80,000 million transistors on a 814 mm² die represent a massive investment in compute resources, while the RX 7800 XT's 28,100 million transistors on a 346 mm² die target efficiency and rasterization performance. Both cards remain active in production, and the database shows no overlapping benchmark results to suggest they compete for the same tasks.