AMD Radeon RX 7400 OEM vs NVIDIA H20 NVL16 Comparison

AMD
RADEON

AMD Radeon RX 7400 OEM

CORE STATE Navi 33
VRAM 8 GB
CLOCK SPEED 1100 MHz
TDP 55 W
BUS WIDTH 128 bit
ARCHITECTURE RDNA 3.0
nm
PROCESS 6 nm
LAUNCH DATE 2025
VS
NVIDIA
GEFORCE

H20 NVL16

CORE STATE GH100
VRAM 96 GB
CLOCK SPEED 1980 MHz
TDP 400 W
BUS WIDTH 6144 bit
ARCHITECTURE Hopper
nm
PROCESS 5 nm
LAUNCH DATE 2025

Analysis: AMD Radeon RX 7400 OEM vs NVIDIA H20 NVL16

Head-to-Head Benchmarks

The recorded database contains no direct head-to-head benchmark results for the AMD Radeon RX 7400 OEM against the NVIDIA H20 NVL16. Both entries show an average benchmark score of zero, and the wins counters for each side are zero. This absence of comparative data means any assessment must rely entirely on the architectural specifications and theoretical throughput figures recorded in the database.

The FP32 floating-point performance shows a decisive gap. The NVIDIA H20 NVL16 delivers 39.54 TFLOPS, which is approximately five times the 7.885 TFLOPS of the AMD Radeon RX 7400 OEM. In FP16 workloads, the divergence widens further. The NVIDIA part reaches 79.07 TFLOPS with a 2:1 ratio, while the AMD part holds at 7.885 TFLOPS with a 1:1 ratio, meaning the NVIDIA accelerator is roughly ten times faster in half-precision math.

Texture throughput follows a similar pattern. The NVIDIA H20 NVL16 sustains 617.8 GTexel/s against the AMD Radeon RX 7400 OEM's 123.2 GTexel/s, a fivefold advantage. Pixel rate, however, flips in favor of AMD. The Radeon RX 7400 OEM produces 70.40 GPixel/s, while the NVIDIA H20 NVL16 manages only 47.52 GPixel/s. This reflects the different design priorities of the two products: the AMD card is built around rasterization output, whereas the NVIDIA accelerator emphasizes compute density.

Memory bandwidth is where the NVIDIA part dominates most dramatically. The H20 NVL16 accesses 4.03 TB/s of bandwidth across a 6144-bit bus, compared to 172.8 GB/s on a 128-bit bus for the RX 7400 OEM. That is a 23.3x difference in raw memory throughput, a figure that shapes every memory-bound workload.

Architecture Differences

The two products come from fundamentally different design lineages. The AMD Radeon RX 7400 OEM uses the Navi 33 chip built on RDNA 3.0 architecture, codenamed Hotpink Bonefish. It is part of the Navi III (RX 7000) generation, fabricated on a 6 nm process at TSMC with 13,300 million transistors on a 204 mm² die. The transistor density measures 65.2M per mm². This is a client-oriented graphics card with a 128-bit memory interface and 8 GB of GDDR6 memory.

The NVIDIA H20 NVL16 uses the GH100 chip based on Hopper architecture, belonging to the Server Hopper (Hxx) generation. It is built on a 5 nm process at TSMC with 80,000 million transistors on an 814 mm² die, yielding a transistor density of 98.3M per mm². The chip is designed for server acceleration, equipped with 96 GB of HBM3 memory on a 6144-bit bus. The production status is marked Active, while the AMD part has no recorded production status.

Shader resources differ enormously. The NVIDIA H20 NVL16 carries 9984 shading units, 312 texture mapping units, and 312 tensor cores. The AMD Radeon RX 7400 OEM has 1792 shading units, 112 TMUs, and 28 ray tracing cores. The NVIDIA part has no recorded ray tracing cores, and the AMD part has no tensor cores. The ROP counts are 24 for NVIDIA and 64 for AMD, which explains the pixel rate advantage for the Radeon.

Clock behavior reveals distinct operating profiles. The AMD part has a base clock of 330 MHz and a boost clock of 1100 MHz, with memory at 1350 MHz (10.8 Gbps effective). The NVIDIA part runs much higher at a base of 1830 MHz and a boost of 1980 MHz, but its memory clock is 1313 MHz (5.3 Gbps effective), reflecting the different memory technology. The thermal design power is 55 W for AMD versus 400 W for NVIDIA. The AMD card is a single-slot design with a 1x 6-pin power connector and a suggested 250 W power supply, while the NVIDIA module is an SXM form factor with a suggested 800 W power supply and no recorded power connector.

Interface support diverges completely. The AMD card uses PCIe 4.0 x8, supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and provides 1x HDMI 2.1 and 3x DisplayPort 2.1 outputs. The NVIDIA part uses PCIe 5.0 x16, has no display outputs, and lists N/A for DirectX, OpenGL, and Vulkan. The AMD card measures 167 mm (6.6 inches) in length, while the NVIDIA module has no recorded dimensions.

Where Each One Wins

The AMD Radeon RX 7400 OEM wins in scenarios that depend on pixel output and standard graphics rendering. Its 70.40 GPixel/s fill rate, 64 ROPs, and full DirectX 12 Ultimate support make it suitable for traditional rasterized graphics workloads. The 8 GB GDDR6 memory on a 128-bit bus is sufficient for conventional gaming or client-side rendering tasks, and the 55 W power envelope allows deployment in low-power systems. The presence of 28 ray tracing cores and HDMI/DisplayPort outputs confirms its role as a display-capable graphics card.

The NVIDIA H20 NVL16 wins in compute-heavy, memory-hungry environments. Its 39.54 TFLOPS FP32 and 79.07 TFLOPS FP16 performance, combined with 4.03 TB/s memory bandwidth and 96 GB capacity, targets large-scale data processing, AI inference, and scientific simulation. The 312 tensor cores are designed for matrix operations, and the lack of display outputs indicates a headless accelerator role. The 400 W TDP and SXM module form factor place it in server racks rather than desktop cases.

The PCIe interface difference matters. The NVIDIA part's PCIe 5.0 x16 link provides higher host bandwidth than the AMD part's PCIe 4.0 x8, which favors data transfer-heavy workloads. The NVIDIA part's 5 nm process and 98.3M transistors per mm² indicate a denser, more compute-oriented layout, while the AMD part's 6 nm process and 65.2M transistors per mm² reflect a more balanced, power-conscious design.

FAQ

Q: Which card has more memory bandwidth?

A: The NVIDIA H20 NVL16 has 4.03 TB/s of bandwidth across a 6144-bit HBM3 interface. The AMD Radeon RX 7400 OEM has 172.8 GB/s over a 128-bit GDDR6 bus.

Q: What is the FP32 performance difference?

A: The NVIDIA H20 NVL16 delivers 39.54 TFLOPS, approximately five times the 7.885 TFLOPS of the AMD Radeon RX 7400 OEM.

Q: Does the AMD card support display output?

A: Yes, the AMD Radeon RX 7400 OEM provides 1x HDMI 2.1 and 3x DisplayPort 2.1 outputs. The NVIDIA H20 NVL16 has no display outputs.

Q: What are the power requirements?

A: The AMD card has a 55 W TDP with a suggested 250 W power supply. The NVIDIA module has a 400 W TDP with a suggested 800 W power supply.

Q: Which chip has more transistors?

A: The NVIDIA GH100 has 80,000 million transistors, while the AMD Navi 33 has 13,300 million. The NVIDIA die measures 814 mm² versus 204 mm² for AMD.

Q: What API support does each provide?

A: The AMD card supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA card lists N/A for all three APIs.

The Verdict

The data indicates two products designed for entirely separate markets, with no overlap in intended use cases. The AMD Radeon RX 7400 OEM is a client graphics card with display outputs, a 55 W power draw, and a 167 mm length suitable for compact systems. Its 8 GB memory and 128-bit bus serve standard graphics workloads, and its 28 ray tracing cores provide hardware-accelerated ray tracing capability. The 70.40 GPixel/s pixel rate is higher than the NVIDIA part, making it the better choice for rasterization-bound tasks.

The NVIDIA H20 NVL16 is a server accelerator with no display capability, a 400 W power draw, and an SXM module form factor. Its 96 GB HBM3 memory, 4.03 TB/s bandwidth, 312 tensor cores, and 39.54 TFLOPS FP32 performance target large-scale compute workloads. The 5 nm process and 80 billion transistors deliver density that the AMD chip cannot match. The 79.07 TFLOPS FP16 performance with 2:1 ratio indicates optimized half-precision throughput for AI training and inference.

For a builder assembling a graphics workstation or gaming PC, the AMD Radeon RX 7400 OEM provides the necessary display connectivity, standard API support, and modest power requirements. For a data center deployment focused on compute acceleration, the NVIDIA H20 NVL16 offers vastly superior raw throughput, memory capacity, and bandwidth. The database shows no benchmark results to compare real-world performance, so the choice rests on the architectural fit for the workload. The AMD part is the only one of the two that can output video signals, and the NVIDIA part is the only one with tensor cores and server-grade memory capacity. Each wins in its own domain, and no single metric suggests crossover suitability.

Specification Differences

| Specification | AMD Radeon RX 7400 OEM | NVIDIA H20 NVL16 |

|---|---|---|

| Chip | Navi 33 | GH100 |

| Architecture | RDNA 3.0 | Hopper |

| Process Node | 6 nm | 5 nm |

| Transistors | 13,300 million | 80,000 million |

| Die Size | 204 mm² | 814 mm² |

| Transistor Density | 65.2M / mm² | 98.3M / mm² |

| Base Clock | 330 MHz | 1830 MHz |

| Boost Clock | 1100 MHz | 1980 MHz |

| Memory Clock | 1350 MHz (10.8 Gbps effective) | 1313 MHz (5.3 Gbps effective) |

| Memory Size | 8 GB GDDR6 | 96 GB HBM3 |

| Memory Bus Width | 128 bit | 6144 bit |

| Memory Bandwidth | 172.8 GB/s | 4.03 TB/s |

| Shading Units | 1792 | 9984 |

| TMUs | 112 | 312 |

| ROPs | 64 | 24 |

| Ray Tracing Cores | 28 | N/A |

| Tensor Cores | N/A | 312 |

| Pixel Rate | 70.40 GPixel/s | 47.52 GPixel/s |

| Texture Rate | 123.2 GTexel/s | 617.8 GTexel/s |

| FP32 Performance | 7.885 TFLOPS | 39.54 TFLOPS |

| FP16 Performance | 7.885 TFLOPS (1:1) | 79.07 TFLOPS (2:1) |

| TDP | 55 W | 400 W |

| Slot Width | Single-slot | SXM Module |

| Power Connectors | 1x 6-pin | N/A |

| Suggested PSU | 250 W | 800 W |

| Bus Interface | PCIe 4.0 x8 | PCIe 5.0 x16 |

| Display Outputs | 1x HDMI 2.1, 3x DisplayPort 2.1 | No outputs |

| DirectX | 12 Ultimate (12_2) | N/A |

| OpenGL | 4.6 | N/A |

| Vulkan | 1.4 | N/A |

| Length | 167 mm (6.6 inches) | N/A |

| Release Date | 2025-08-07 | 2025-09-01 |

| Production Status | N/A | Active |

DETAILED SPECIFICATIONS

SPECIFICATION
RX 7400 OEM
H20 NVL16
Core Specs
Shading Units
1,792
9,984 +457.1%
Shaders
1,792
9,984 +457.1%
TMUs
112
312 +178.6%
ROPs
64
24 -62.5%
Compute Units
28
—
SM Count
—
78
Clocks
Base Clock
330 MHz
1830 MHz
Boost Clock
1100 MHz
1980 MHz
Memory Clock
1350 MHz 10.8 Gbps effective
1313 MHz 5.3 Gbps effective
Memory
Memory Size
8 GB
96 GB
VRAM (MB)
8,192
98,304 +1100.0%
Memory Type
GDDR6
HBM3
Memory Bus
128 bit
6144 bit
Bandwidth
172.8 GB/s
4.03 TB/s
Cache
L1 Cache
128 KB per Array
256 KB (per SM)
L2 Cache
2 MB
60 MB
L3 Cache
32 MB
—
L0 Cache
32 KB per WGP
—
Performance
Pixel Rate
70.40 GPixel/s
47.52 GPixel/s
Texture Rate
123.2 GTexel/s
617.8 GTexel/s
FP32 (TFLOPS)
7.885 TFLOPS
39.54 TFLOPS
FP64 (TFLOPS)
246.4 GFLOPS (1:32)
19.77 TFLOPS (1:2)
FP16 (TFLOPS)
7.885 TFLOPS (1:1)
79.07 TFLOPS (2:1)
AI/RT
RT Cores
28
—
Tensor Cores
—
312
Matrix Cores
56
—
Power
TDP
55 W
400 W
TDP (W)
55
400 +627.3%
Suggested PSU
250 W
800 W
Power Connectors
1x 6-pin
—
Architecture
Architecture
RDNA 3.0
Hopper
GPU Name
Navi 33
GH100
Codename
Hotpink Bonefish
—
Generation
Navi III (RX 7000)
Server Hopper (Hxx)
Process Size
6 nm
5 nm
Transistors
13,300 million
80,000 million
Die Size
204 mm²
814 mm²
Foundry
TSMC
TSMC
Density
65.2M / mm²
98.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
—
OpenGL
4.6
—
Vulkan
1.4
—
OpenCL
2.2
3.0
CUDA
—
9.0
Shader Model
6.9
—
Physical
Slot Width
Single-slot
SXM Module
Length
167 mm 6.6 inches
—
Outputs
1x HDMI 2.1a3x DisplayPort 2.1
No outputs
Bus Interface
PCIe 4.0 x8
PCIe 5.0 x16
Other
Production
—
Active
Predecessor
Navi II
Server Ada
Successor
Navi IV
Server Blackwell
View Radeon RX 7400 OEM Details View H20 NVL16 Details