NVIDIA GeForce RTX 5090 SE vs NVIDIA H100 SXM5 64 GB Comparison
NVIDIA GeForce RTX 5090 SE
H100 SXM5 64 GB
Analysis: NVIDIA GeForce RTX 5090 SE vs NVIDIA H100 SXM5 64 GB
The Verdict
The recorded data places the NVIDIA GeForce RTX 5090 SE and NVIDIA H100 SXM5 64 GB at the same 50th percentile against all GPUs in the database, with identical average benchmark scores of zero. This parity reflects two very different design philosophies, and the choice depends entirely on workload type rather than raw performance.
The RTX 5090 SE is a Blackwell 2.0 consumer graphics card built for real-time rendering, direct display output, and standard graphics APIs. It carries 24 GB of GDDR7 memory, a 384-bit bus, and 1.34 TB/s of bandwidth. It includes 110 ray tracing cores, 160 ROPs, and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4. This card targets gaming and workstation graphics where visual output to a monitor is required.
The H100 SXM5 is a Hopper architecture server accelerator with 64 GB of HBM3 memory, a 3072-bit bus, and 2.02 TB/s of bandwidth. It has no display outputs, no graphics API support, and a much lower pixel rate of 47.52 GPixel/s compared to the RTX 5090 SE's 380.3 GPixel/s. Its strength lies in FP16 compute, delivering 267.6 TFLOPS at a 4:1 ratio, versus the RTX 5090 SE's 66.94 TFLOPS at 1:1.
The data shows that both parts are currently in active production. The RTX 5090 SE has a launch MSRP of 1,499 USD. The H100 SXM5 has no recorded launch MSRP. For users needing graphics output and consumer software compatibility, the RTX 5090 SE is the only option, as the H100 SXM5 cannot drive a display. For high-precision FP16 tensor workloads and large memory capacity, the H100 SXM5 provides double the memory and 4 times the FP16 throughput.
FAQ
Q: Which GPU has more memory bandwidth?
A: The H100 SXM5 leads with 2.02 TB/s over its 3072-bit HBM3 interface, while the RTX 5090 SE provides 1.34 TB/s over its 384-bit GDDR7 bus.
Q: Which card supports DirectX 12 Ultimate?
A: Only the RTX 5090 SE lists DirectX 12 Ultimate (12_2) support. The H100 SXM5 has no recorded DirectX, OpenGL, or Vulkan support in the database.
Q: What is the difference in FP16 compute performance?
A: The H100 SXM5 delivers 267.6 TFLOPS FP16 at a 4:1 ratio, while the RTX 5090 SE delivers 66.94 TFLOPS FP16 at a 1:1 ratio. The H100 SXM5 is 4 times faster in this metric.
Q: How do the two cards compare in pixel fill rate?
A: The RTX 5090 SE achieves 380.3 GPixel/s, which is roughly 8 times higher than the H100 SXM5's 47.52 GPixel/s.
Q: Which card has more memory capacity?
A: The H100 SXM5 has 64 GB of HBM3, while the RTX 5090 SE has 24 GB of GDDR7. The H100 SXM5 offers 2.67 times the capacity.
Q: What are the power requirements for each?
A: The RTX 5090 SE has a 500 W TDP with a suggested 900 W PSU and a single 16-pin connector. The H100 SXM5 has a 700 W TDP with a suggested 1100 W PSU and an 8-pin EPS connector.
Architecture Differences
The RTX 5090 SE uses the GB202 chip built on the Blackwell 2.0 architecture, fabricated by TSMC on a 5 nm process. It integrates 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per mm². The architecture includes 14,080 shading units, 440 TMUs, 160 ROPs, 110 ray tracing cores, and 440 tensor cores. It supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4, making it suitable for consumer graphics workloads.
The H100 SXM5 uses the GH100 chip built on the Hopper architecture, also fabricated by TSMC on a 5 nm process. It integrates 80,000 million transistors on a larger 814 mm² die, yielding a lower transistor density of 98.3 million per mm². The architecture includes 16,896 shading units, 528 TMUs, only 24 ROPs, and 528 tensor cores. It has no ray tracing cores and no graphics API support, reflecting its server-focused design.
The FP16 ratio differs significantly: the RTX 5090 SE runs FP16 at a 1:1 ratio with FP32, while the H100 SXM5 runs FP16 at a 4:1 ratio, enabling much higher tensor throughput. The H100 SXM5 uses HBM3 memory with a 3072-bit bus, while the RTX 5090 SE uses GDDR7 with a 384-bit bus. The RTX 5090 SE supports display outputs via HDMI 2.1b and DisplayPort 2.1b, while the H100 SXM5 has no outputs at all.
Specification Differences
The two GPUs differ across nearly every specification category. The RTX 5090 SE has a base clock of 1740 MHz and a boost clock of 2377 MHz, while the H100 SXM5 runs at 1665 MHz base and 1980 MHz boost. Memory clocks differ as well: the RTX 5090 SE uses 1750 MHz with 28 Gbps effective, while the H100 SXM5 uses 1313 MHz with 5.3 Gbps effective.
Memory configuration is a major differentiator. The RTX 5090 SE has 24 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth. The H100 SXM5 has 64 GB of HBM3 on a 3072-bit bus with 2.02 TB/s bandwidth. The H100 SXM5 provides 2.67 times the capacity and 1.51 times the bandwidth.
Compute resources also diverge. The RTX 5090 SE has 14,080 shading units, 440 TMUs, and 160 ROPs. The H100 SXM5 has 16,896 shading units, 528 TMUs, but only 24 ROPs. The RTX 5090 SE has 110 ray tracing cores, while the H100 SXM5 has none. Both have tensor cores, with the RTX 5090 SE at 440 and the H100 SXM5 at 528.
Pixel and texture rates show the rendering focus of the RTX 5090 SE: 380.3 GPixel/s versus 47.52 GPixel/s for the H100 SXM5. Texture rates are nearly identical at 1,045.9 GTexel/s and 1,045.4 GTexel/s respectively. FP32 performance is also nearly identical at 66.94 TFLOPS and 66.91 TFLOPS.
Power and physical specifications differ. The RTX 5090 SE has a 500 W TDP, dual-slot width, a 16-pin connector, and a suggested 900 W PSU. It measures 267 mm by 111 mm by 40 mm. The H100 SXM5 has a 700 W TDP, SXM module form factor, an 8-pin EPS connector, and a suggested 1100 W PSU, with no recorded dimensions.
The RTX 5090 SE was released on 2025-12-31 with a launch MSRP of 1,499 USD. The H100 SXM5 was released on 2023-03-20 with no recorded launch MSRP. Both are active in production. The RTX 5090 SE succeeds the GeForce 40 series and precedes GeForce 60. The H100 SXM5 succeeds Server Ada and precedes Server Blackwell.
Head-to-Head Benchmarks
The database records no head-to-head benchmark results between these two GPUs, and neither has an average benchmark score beyond zero. However, the specification data allows direct comparison across several measured metrics.
In FP16 compute, the H100 SXM5 dominates with 267.6 TFLOPS versus the RTX 5090 SE's 66.94 TFLOPS, a 4 times advantage. This stems from the 4:1 FP16 ratio on the H100 SXM5 versus the 1:1 ratio on the RTX 5090 SE. For tensor-heavy workloads such as large language model training or inference, the H100 SXM5's FP16 throughput is a decisive advantage.
In memory bandwidth, the H100 SXM5 again leads with 2.02 TB/s versus 1.34 TB/s, a 1.51 times advantage. Its 3072-bit HBM3 interface provides substantially wider access than the 384-bit GDDR7 bus on the RTX 5090 SE. Combined with 64 GB of capacity versus 24 GB, the H100 SXM5 can hold larger datasets and feed them to the compute units faster.
The RTX 5090 SE wins decisively in pixel throughput. Its 380.3 GPixel/s is exactly 8 times the H100 SXM5's 47.52 GPixel/s. This metric reflects rasterization output, and the RTX 5090 SE's 160 ROPs versus 24 ROPs explains the gap. The H100 SXM5 simply is not built for graphics rendering.
FP32 performance is effectively a tie: 66.94 TFLOPS for the RTX 5090 SE and 66.91 TFLOPS for the H100 SXM5, a difference of 0.03 TFLOPS. Texture rate is also nearly tied at 1,045.9 GTexel/s versus 1,045.4 GTexel/s, a 0.5 GTexel/s difference. These near-parity results indicate that both chips have similar general compute throughput, despite their different architectures.
Clock speeds favor the RTX 5090 SE, with a 2377 MHz boost versus 1980 MHz on the H100 SXM5. The RTX 5090 SE also has a higher base clock at 1740 MHz versus 1665 MHz. Transistor density favors the RTX 5090 SE at 122.9 million per mm² versus 98.3 million per mm², despite the H100 SXM5 having a larger die at 814 mm².
Where Each One Wins
The RTX 5090 SE wins in every graphics-oriented category. Its 110 ray tracing cores provide hardware acceleration for ray-traced rendering, a feature entirely absent from the H100 SXM5. Its 160 ROPs and 380.3 GPixel/s pixel rate enable high-resolution rasterization. Its support for DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4 means it can run the full range of consumer graphics software, and its HDMI 2.1b and DisplayPort 2.1b outputs connect directly to displays. The dual-slot form factor and 267 mm length fit standard desktop chassis, and the 500 W TDP with a 900 W suggested PSU is manageable in a workstation context.
The RTX 5090 SE also wins on clock speed, with a 2377 MHz boost versus 1980 MHz on the H100 SXM5, and on transistor density, at 122.9 million per mm² versus 98.3 million. Its GDDR7 memory at 28 Gbps effective is fast per pin, even though the overall bandwidth is lower. The 24 GB capacity suits most gaming and workstation graphics workloads.
The H100 SXM5 wins in compute-heavy, memory-intensive server workloads. Its 267.6 TFLOPS FP16 throughput is 4 times higher than the RTX 5090 SE, making it the clear choice for tensor operations and AI training. Its 64 GB of HBM3 memory provides 2.67 times the capacity, allowing much larger models and datasets to reside on the accelerator. Its 2.02 TB/s bandwidth is 1.51 times higher, reducing memory bottlenecks for bandwidth-bound kernels.
The H100 SXM5 also has more shading units at 16,896 versus 14,080, more TMUs at 528 versus 440, and more tensor cores at 528 versus 440. Its 3072-bit memory bus is 8 times wider than the RTX 5090 SE's 384-bit bus. The 700 W TDP and 1100 W suggested PSU reflect its server-oriented power delivery through the 8-pin EPS connector and SXM module form factor.
The near-identical FP32 performance and texture rates indicate that for pure FP32 compute, either card would perform similarly. The decision rests on workload type: graphics rendering and display output require the RTX 5090 SE, while FP16 tensor compute and large memory footprints require the H100 SXM5. The data shows no overlap in their primary use cases.