NVIDIA GeForce RTX 5070 Ti Mobile vs NVIDIA RTX PRO 6000 Blackwell Comparison

FAQ

Q: Which GPU has the higher transistor count?

A: The NVIDIA RTX PRO 6000 Blackwell contains 92,200 million transistors, while the NVIDIA GeForce RTX 5070 Ti Mobile contains 31,100 million. The RTX PRO 6000 Blackwell uses a GB202 chip with a 750 mm² die size, versus the GB205 chip with a 263 mm² die in the mobile part.

Q: What is the memory capacity difference between the two?

A: The RTX PRO 6000 Blackwell offers 96 GB of GDDR7 memory on a 512-bit bus, delivering 1.79 TB/s of bandwidth. The RTX 5070 Ti Mobile has 12 GB of GDDR7 on a 192-bit bus, providing 672.0 GB/s.

Q: How do their benchmark scores compare?

A: The RTX 5070 Ti Mobile has an average benchmark score of 35,435 across nine tests, placing it in the 80th percentile of all GPUs. The RTX PRO 6000 Blackwell has a single recorded benchmark result of 16,408 in 3DMark Steel Nomad DX12, placing it in the 59th percentile.

Q: What are the clock speeds for each GPU?

A: The RTX 5070 Ti Mobile runs at a base clock of 847 MHz and a boost clock of 1447 MHz. The RTX PRO 6000 Blackwell is significantly faster in this regard, with a base of 1590 MHz and a boost of 2617 MHz.

Q: Which GPU has more shading units and ray tracing cores?

A: The RTX PRO 6000 Blackwell has 24,064 shading units and 188 RT cores. The RTX 5070 Ti Mobile has 5,888 shading units and 46 RT cores.

Q: What is the power draw for each card?

A: The RTX 5070 Ti Mobile has a TDP of 60 W and uses no external power connectors, fitting an IGP slot width. The RTX PRO 6000 Blackwell has a TDP of 600 W, requires a 1x 16-pin power connector, a suggested power supply of 1000 W, and takes up a dual-slot width.

Architecture Differences

Both GPUs share the Blackwell 2.0 architecture, are fabricated on a 5 nm process at TSMC, and support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The similarities end there, as the two chips are built for entirely different segments.

The RTX PRO 6000 Blackwell uses the GB202 chip, which is the larger physical die at 750 mm² and houses 92,200 million transistors. This results in a transistor density of 122.9M per mm². The RTX 5070 Ti Mobile uses the GB205 chip, a much smaller die at 263 mm² with 31,100 million transistors, yielding a density of 118.3M per mm².

The compute resources differ by a wide margin. The RTX PRO 6000 Blackwell features 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. The RTX 5070 Ti Mobile features 5,888 shading units, 184 TMUs, 80 ROPs, 46 RT cores, and 184 tensor cores. These numbers indicate the workstation card has roughly four times the shading and tensor core count.

The memory subsystem is another major architectural divergence. The RTX PRO 6000 Blackwell uses a 512-bit memory bus with 96 GB of GDDR7, while the RTX 5070 Ti Mobile uses a 192-bit bus with 12 GB of GDDR7. The memory clock is identical at 1750 MHz with 28 Gbps effective, but the bus width difference creates a massive bandwidth gap.

The RTX PRO 6000 Blackwell also carries a dual-slot form factor with a 304 mm length, 137 mm height, and 40 mm width, plus four DisplayPort 2.1b outputs. The RTX 5070 Ti Mobile is an integrated graphics processor with portable-device-dependent display outputs and no specified dimensions. The workstation card requires a 1000 W power supply and a 16-pin connector, whereas the mobile part draws power through the host system with no dedicated connectors.

Head-to-Head Benchmarks

The database contains no direct head-to-head benchmark results between these two GPUs, so a direct comparison across identical tests is not possible. Instead, the available data shows how each performs in its own benchmark suite.

The RTX 5070 Ti Mobile has a comprehensive set of nine recorded scores. Its Geekbench OpenCL result is 143,870, and its Geekbench Vulkan score is 139,213. In PassMark tests, it scores 151 in DirectX 10, 237 in DirectX 11, 102 in DirectX 12, and 259 in DirectX 9. Its PassMark G2D score is 981, G3D is 24,004, and GPU compute is 10,101. The average benchmark score across all these tests is 35,435, which places it in the 80th percentile of all GPUs.

The RTX PRO 6000 Blackwell has only one recorded benchmark: a 3DMark Steel Nomad DX12 score of 16,408. This stands as its average score and puts it in the 59th percentile of all GPUs.

When comparing the two through their nearest rivals, the RTX 5070 Ti Mobile sits close to the NVIDIA Quadro GV100, which scores 35,520 with a delta of -0.2%. It also trails the AMD Radeon Pro Duo by 1.2% (35,860) and the NVIDIA T1000 by 2.4% (36,289), while leading the NVIDIA A2 by 2.1% (34,690). The RTX PRO 6000 Blackwell matches the AMD Radeon PRO W7500 exactly with a delta of 0%, edges the AMD Radeon RX 5700 XT by 0.3% (16,361), and the AMD Radeon Pro 5600M by 0.4% (16,351), while trailing the NVIDIA GeForce RTX 5090 D V2 by 0.6% (16,504).

The raw score difference is substantial, but the benchmark contexts differ. The RTX 5070 Ti Mobile's 35,435 average comes from a mix of legacy DirectX and compute workloads, whereas the RTX PRO 6000 Blackwell's 16,408 comes from a modern DX12 test. The percentile rankings reflect this: the mobile part ranks higher among all GPUs at 80%, while the workstation part ranks at 59%.

Specification Differences

| Specification | RTX 5070 Ti Mobile | RTX PRO 6000 Blackwell |

|---|---|---|

| Chip | GB205 | GB202 |

| Process node | 5 nm | 5 nm |

| Transistors | 31,100 million | 92,200 million |

| Die size | 263 mm² | 750 mm² |

| Transistor density | 118.3M / mm² | 122.9M / mm² |

| Base clock | 847 MHz | 1590 MHz |

| Boost clock | 1447 MHz | 2617 MHz |

| Memory size | 12 GB | 96 GB |

| Memory type | GDDR7 | GDDR7 |

| Memory bus | 192 bit | 512 bit |

| Memory bandwidth | 672.0 GB/s | 1.79 TB/s |

| Shading units | 5,888 | 24,064 |

| TMUs | 184 | 752 |

| ROPs | 80 | 192 |

| RT cores | 46 | 188 |

| Tensor cores | 184 | 752 |

| Pixel rate | 115.8 GPixel/s | 502.5 GPixel/s |

| Texture rate | 266.2 GTexel/s | 1,968.0 GTexel/s |

| FP32 | 17.04 TFLOPS | 126.0 TFLOPS |

| FP16 | 17.04 TFLOPS (1:1) | 126.0 TFLOPS (1:1) |

| TDP | 60 W | 600 W |

| Slot width | IGP | Dual-slot |

| Power connectors | None | 1x 16-pin |

| Suggested PSU | None | 1000 W |

| Display outputs | Portable Device Dependent | 4x DisplayPort 2.1b |

| Dimensions | Not specified | 304 mm x 137 mm x 40 mm |

| Release date | 2025-02-28 | 2025-03-17 |

| Launch MSRP | None | 8,565 USD |

Where Each One Wins

The RTX 5070 Ti Mobile wins in portability and efficiency. Its 60 W TDP, IGP slot width, and lack of power connectors make it suitable for thin laptops where the host system handles all power delivery. The database shows it outperforms the NVIDIA A2 by 2.1% in average score, indicating competitiveness against other low-power workstation accelerators. Its 80th percentile ranking across all GPUs suggests strong relative performance within its class.

The RTX PRO 6000 Blackwell wins in raw compute throughput and memory capacity. Its FP32 performance of 126.0 TFLOPS is over seven times the 17.04 TFLOPS of the mobile chip. The texture rate of 1,968.0 GTexel/s and pixel rate of 502.5 GPixel/s dwarf the mobile part's 266.2 GTexel/s and 115.8 GPixel/s. The 96 GB memory capacity and 1.79 TB/s bandwidth are designed for workloads that need to hold massive datasets on the GPU.

The RTX PRO 6000 Blackwell also wins in clock speed, with a boost of 2617 MHz versus 1447 MHz, and in physical connectivity, offering four DisplayPort 2.1b outputs versus the mobile part's portable-device-dependent display outputs. The workstation card is built for fixed installation in a desktop chassis, as indicated by its dual-slot design and 1000 W power supply requirement.

The Verdict

The data indicates these two GPUs serve fundamentally different purposes. The RTX 5070 Ti Mobile is a mobile graphics processor with a modest 60 W power envelope, 12 GB of memory, and a compact IGP form factor. Its benchmark profile shows solid performance across legacy and modern tests, ranking in the 80th percentile of all GPUs. It is the appropriate choice for portable systems that need Blackwell 2.0 architecture without the physical and power constraints of a desktop workstation card.

The RTX PRO 6000 Blackwell is a workstation-class accelerator with 96 GB of GDDR7 memory, a 512-bit bus, and 126.0 TFLOPS of FP32 compute. Its single 3DMark Steel Nomad DX12 score of 16,408 places it near the AMD Radeon PRO W7500 and NVIDIA GeForce RTX 5090 D V2, confirming its position in the high-end desktop segment. Its 59th percentile ranking reflects the limited benchmark coverage rather than a weakness; the recorded test is a modern DX12 workload that stresses the card differently than the mixed suite used for the mobile part.

Users who need mobile rendering, low power consumption, and integration into a laptop should select the RTX 5070 Ti Mobile. Users who need maximum compute throughput, massive memory capacity, and workstation display outputs should select the RTX PRO 6000 Blackwell. The launch MSRP of 8,565 USD for the workstation card reflects its positioning, while the mobile part has no listed launch price. The choice is dictated by the physical platform and workload requirements, not by direct performance equivalence, as no shared benchmark results exist in the database.