NVIDIA GeForce RTX 4070 Ti SUPER AD102 vs NVIDIA Quadro M5000M Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 4070 Ti SUPER AD102

CORE STATE AD102
VRAM 16 GB
CLOCK SPEED 2610 MHz
TDP 285 W
BUS WIDTH 256 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024
VS
NVIDIA
GEFORCE

Quadro M5000M

CORE STATE GM204
VRAM 8 GB
CLOCK SPEED 1051 MHz
TDP 100 W
BUS WIDTH 256 bit
ARCHITECTURE Maxwell 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2015

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
6,269.5
N/A
geekbench_opencl
N/A
22,920
geekbench_vulkan
N/A
24,875
passmark_directx_10
N/A
35
passmark_directx_11
N/A
54
passmark_directx_12
N/A
29
passmark_directx_9
N/A
119
passmark_g2d
N/A
476
passmark_g3d
N/A
7,062
passmark_gpu_compute
N/A
2,756

Analysis: NVIDIA GeForce RTX 4070 Ti SUPER AD102 vs NVIDIA Quadro M5000M

Head-to-Head Benchmarks

The benchmark data in this comparison is limited but striking. The NVIDIA Quadro M5000M and the NVIDIA GeForce RTX 4070 Ti SUPER AD102 do not share a single common benchmark test in the FACT PACK. The Quadro M5000M has a full suite of nine tests spanning Geekbench and Passmark variants, while the RTX 4070 Ti SUPER AD102 has only one recorded result: a 3DMark Steel Nomad DX12 score of 6269.5. This makes a direct head-to-head comparison impossible on a test-by-test basis, but the broader scores tell a clear story.

The Quadro M5000M’s average benchmark score across its suite is 6481, placing it in the 37th percentile of all GPUs. Its nearest rivals include the AMD Radeon Vega 10 Mobile (avg score 6476, delta 0.1%), the NVIDIA GeForce GT 555M (avg score 6493, delta -0.2%), and the NVIDIA GeForce GTX 670M (avg score 6513, delta -0.5%). These are all roughly equivalent performers, with the M5000M sitting within a percentage point of each. The data shows this is a mid-range mobile part from its era, not a flagship.

The RTX 4070 Ti SUPER AD102, by contrast, has an average benchmark score of 6270, placing it in the 36th percentile. Its nearest rivals are the NVIDIA GeForce RTX 5070 Ti SUPER (avg score 6270, delta 0%), the NVIDIA Quadro K620 (avg score 6282, delta -0.2%), the AMD FirePro W600 (avg score 6223, delta 0.8%), and the AMD Radeon R7 M350 (avg score 6327, delta -0.9%). The near-zero deltas across these rivals suggest the RTX 4070 Ti SUPER AD102’s single Steel Nomad score is not representative of its class—the company it keeps in the percentile ranking is populated by old, low-end parts, which is an artifact of the sparse benchmark data rather than a true performance indicator.

Looking at the raw compute figures in the FACT PACK, the gap is enormous. The M5000M delivers 3.229 TFLOPS of FP32 performance, while the RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS—a difference of roughly 13.7 times. Pixel rate jumps from 67.26 GPixel/s to 250.6 GPixel/s, and texture rate from 100.9 GTexel/s to 689.0 GTexel/s. Memory bandwidth scales from 160.4 GB/s to 672.3 GB/s. In every measurable specification, the RTX 4070 Ti SUPER AD102 dominates by an order of magnitude or more. The Quadro M5000M has no recorded wins in the head-to-head data; the win count is 0 for both cards because no shared benchmarks exist, but the specification delta makes the outcome unambiguous.

The percentile rankings are misleading here. Both cards sit near the 36-37th percentile, but that is a function of the benchmark datasets, not the hardware. The M5000M’s percentile comes from a broad set of legacy tests where it genuinely competes with other old mobile GPUs. The RTX 4070 Ti SUPER AD102’s percentile comes from a single modern DX12 test where it scores 6269.5, but that score alone does not capture its true standing. A builder looking at these numbers should rely on the specification table rather than the percentile field.

The Verdict

The data is clear: the NVIDIA GeForce RTX 4070 Ti SUPER AD102 is the superior card in every specification category. It has more than five times the shading units (8448 vs 1536), nearly three times the TMUs (264 vs 96), and 50% more ROPs (96 vs 64). It has 16 GB of GDDR6X memory versus 8 GB of GDDR5, and its 672.3 GB/s bandwidth is over four times the M5000M’s 160.4 GB/s. The FP32 compute advantage is 44.10 TFLOPS versus 3.229 TFLOPS. There is no scenario in the FACT PACK where the M5000M wins.

Who should pick the Quadro M5000M? Only a user constrained by an MXM-module laptop chassis from the mid-2010s, where the card’s 100 W TDP and MXM-B (3.0) interface are the only compatible options. It is end-of-life, released in 2015, and its nearest rivals are all mobile or integrated parts of similar vintage. Its best benchmark scores—22920 in Geekbench OpenCL and 24875 in Geekbench Vulkan—are respectable for its generation but utterly eclipsed by the RTX 4070 Ti SUPER AD102’s raw compute.

Who should pick the RTX 4070 Ti SUPER AD102? Any builder needs a modern desktop GPU with PCIe 4.0 x16, a triple-slot cooler, and a 16-pin power connector. It is also end-of-life, released in 2024, but it carries the Ada Lovelace architecture with 66 RT cores and 264 tensor cores, which the M5000M lacks entirely. Its 285 W TDP and 600 W suggested PSU are substantial, but the performance per watt is still far ahead—44.10 TFLOPS at 285 W versus 3.229 TFLOPS at 100 W. The RTX 4070 Ti SUPER AD102 is the only rational choice for any modern workload, from gaming to compute.

The launch MSRP of the RTX 4070 Ti SUPER AD102 is 799 USD. The M5000M has no recorded launch MSRP.

Architecture Differences

The two cards are separated by two full architecture generations. The Quadro M5000M uses the GM204 chip on the Maxwell 2.0 architecture, built on a 28 nm process at TSMC. It packs 5,200 million transistors on a 398 mm² die, giving a transistor density of 13.1M per mm². The RTX 4070 Ti SUPER AD102 uses the AD102 chip on the Ada Lovelace architecture, built on a 5 nm process, also at TSMC. It contains 76,300 million transistors on a 609 mm² die, with a density of 125.3M per mm². That is a 14.7-fold increase in transistor count and a 9.6-fold increase in density, enabled by the smaller process node.

The M5000M has no RT cores and no tensor cores. The RTX 4070 Ti SUPER AD102 has 66 RT cores and 264 tensor cores, enabling hardware-accelerated ray tracing and AI workloads that the Maxwell part cannot perform. The M5000M’s FP16 performance is not listed; the RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS FP16 at a 1:1 ratio with FP32, meaning it does not sacrifice half-precision throughput.

The M5000M supports DirectX 12 (12_1) and Vulkan 1.4. The RTX 4070 Ti SUPER AD102 supports DirectX 12 Ultimate (12_2) and the same Vulkan 1.4. Both support OpenGL 4.6. The newer DirectX 12 Ultimate tier includes features like mesh shaders and variable rate shading that the older 12_1 tier cannot handle, though the FACT PACK does not enumerate those features directly.

The production status is end-of-life for both cards. The M5000M’s predecessor is the Quadro Kepler-M and its successor is the Quadro Pascal-M. The RTX 4070 Ti SUPER AD102’s predecessor is the GeForce 30 series and its successor is the GeForce 50 series. The release dates are 2015-08-17 for the M5000M and 2024-06-09 for the RTX 4070 Ti SUPER AD102, a gap of nearly nine years.

Specification Differences

The memory subsystem differs fundamentally. The M5000M has 8 GB of GDDR5 on a 256-bit bus, running at 1253 MHz with 5 Gbps effective speed, yielding 160.4 GB/s bandwidth. The RTX 4070 Ti SUPER AD102 has 16 GB of GDDR6X on a 256-bit bus, running at 1313 MHz with 21 Gbps effective speed, yielding 672.3 GB/s. Both have the same bus width, but the newer memory type and higher clock speed quadruple the bandwidth.

The core configuration is drastically different. The M5000M has 1536 shading units, 96 TMUs, and 64 ROPs. The RTX 4070 Ti SUPER AD102 has 8448 shading units, 264 TMUs, and 96 ROPs. The clock speeds also differ: the M5000M runs at 962 MHz base and 1051 MHz boost, while the RTX 4070 Ti SUPER AD102 runs at 2340 MHz base and 2610 MHz boost. The boost clock alone is 2.5 times higher, and combined with the core count, the compute throughput scales by more than an order of magnitude.

The physical form factors are incompatible. The M5000M is an MXM Module with an MXM-B (3.0) bus interface, 100 W TDP, and no power connectors. The RTX 4070 Ti SUPER AD102 is a triple-slot card with a PCIe 4.0 x16 interface, 285 W TDP, and a single 16-pin power connector. The RTX card is 310 mm long, 140 mm high, and 61 mm wide; the M5000M has no listed dimensions because it is a mobile module. The RTX card’s suggested PSU is 600 W; the M5000M has no suggested PSU listed.

Display outputs differ as well. The M5000M’s outputs are portable-device dependent, meaning they vary by laptop design. The RTX 4070 Ti SUPER AD102 has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The M5000M’s memory clock is listed at 1253 MHz with 5 Gbps effective, while the RTX card’s is 1313 MHz with 21 Gbps effective.

FAQ

Q: Which card has more memory bandwidth?

A: The RTX 4070 Ti SUPER AD102 has 672.3 GB/s versus the M5000M’s 160.4 GB/s, a 4.2x advantage.

Q: Does the Quadro M5000M support ray tracing?

A: No. The M5000M has no RT cores listed in the FACT PACK, while the RTX 4070 Ti SUPER AD102 has 66 RT cores.

Q: Are these cards compatible with the same motherboards?

A: No. The M5000M uses an MXM-B (3.0) interface for laptops, while the RTX 4070 Ti SUPER AD102 uses PCIe 4.0 x16 for desktop systems.

Q: What is the FP32 compute difference?

A: The RTX 4070 Ti SUPER AD102 delivers 44.10 TFLOPS, which is roughly 13.7 times the M5000M’s 3.229 TFLOPS.

Q: Which card has more VRAM?

A: The RTX 4070 Ti SUPER AD102 has 16 GB of GDDR6X, while the M5000M has 8 GB of GDDR5.

Q: Are both cards still in production?

A: No. Both are end-of-life. The M5000M released in 2015, and the RTX 4070 Ti SUPER AD102 released in 2024.

Where Each One Wins

The RTX 4070 Ti SUPER AD102 wins in every specification category that the FACT PACK records. It has more shading units, TMUs, ROPs, memory, bandwidth, compute throughput, pixel rate, texture rate, and clock speed. It has RT cores and tensor cores that the M5000M lacks entirely. It supports a newer DirectX version (12 Ultimate versus 12_1). It has a higher transistor density by an order of magnitude. There is no workload in the data where the M5000M comes out ahead.

The M5000M’s only advantages are practical ones for a very narrow use case. It has a 100 W TDP versus 285 W, making it far easier to cool in a portable chassis. It requires no power connectors, and it fits an MXM slot, which is the only way to upgrade a laptop from that era. It also has a lower transistor count and die size, which historically correlates with lower manufacturing cost, but the FACT PACK does not list pricing for the M5000M. For a builder maintaining a legacy Maxwell-based mobile workstation, the M5000M is the correct drop-in replacement. For any other purpose, the RTX 4070 Ti SUPER AD102 is categorically superior.

The benchmark scores reinforce this. The M5000M’s best results—22920 in Geekbench OpenCL and 24875 in Geekbench Vulkan—are middling for its generation. The RTX 4070 Ti SUPER AD102’s single 3DMark Steel Nomad score of 6269.5 does not have a comparable M5000M result, but the spec sheet makes the outcome predictable. The RTX card offers 16 GB of GDDR6X, 44.10 TFLOPS, and hardware ray tracing; the M5000M offers 8 GB of GDDR5, 3.229 TFLOPS, and no RT support. The verdict is straightforward: choose the RTX 4070 Ti SUPER AD102 unless your hardware is physically locked to an MXM module.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 4070 Ti SUPER AD102
Quadro M5000M
Core Specs
Shading Units
8,448
1,536 -81.8%
Shaders
8,448
1,536 -81.8%
TMUs
264
96 -63.6%
ROPs
96
64 -33.3%
SM Count
66
—
Clocks
Base Clock
2340 MHz
962 MHz
Boost Clock
2610 MHz
1051 MHz
Memory Clock
1313 MHz 21 Gbps effective
1253 MHz 5 Gbps effective
Memory
Memory Size
16 GB
8 GB
VRAM (MB)
16,384
8,192 -50.0%
Memory Type
GDDR6X
GDDR5
Memory Bus
256 bit
256 bit
Bandwidth
672.3 GB/s
160.4 GB/s
Cache
L1 Cache
128 KB (per SM)
48 KB (per SMM)
L2 Cache
48 MB
2 MB
Performance
Pixel Rate
250.6 GPixel/s
67.26 GPixel/s
Texture Rate
689.0 GTexel/s
100.9 GTexel/s
FP32 (TFLOPS)
44.10 TFLOPS
3.229 TFLOPS
FP64 (TFLOPS)
689.0 GFLOPS (1:64)
100.9 GFLOPS (1:32)
FP16 (TFLOPS)
44.10 TFLOPS (1:1)
—
AI/RT
RT Cores
66
—
Tensor Cores
264
—
Power
TDP
285 W
100 W
TDP (W)
285
100 -64.9%
Suggested PSU
600 W
—
Power Connectors
1x 16-pin
None
Architecture
Architecture
Ada Lovelace
Maxwell 2.0
GPU Name
AD102
GM204
Generation
GeForce 40
Quadro Maxwell-M (Mx000M)
Process Size
5 nm
28 nm
Transistors
76,300 million
5,200 million
Die Size
609 mm²
398 mm²
Foundry
TSMC
TSMC
Density
125.3M / mm²
13.1M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.9
5.2
Shader Model
6.9
6.8
Physical
Slot Width
Triple-slot
MXM Module
Length
310 mm 12.2 inches
—
Height
140 mm 5.5 inches
—
Outputs
1x HDMI 2.13x DisplayPort 1.4a
Portable Device Dependent
Bus Interface
PCIe 4.0 x16
MXM-B (3.0)
Other
Launch Price
799 USD
—
Production
End-of-life
End-of-life
Predecessor
GeForce 30
Quadro Kepler-M
Successor
GeForce 50
Quadro Pascal-M
View GeForce RTX 4070 Ti SUPER AD102 Details View Quadro M5000M Details