NVIDIA GeForce RTX 3080 Ti vs NVIDIA Quadro M6000 24 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 3080 Ti

CORE STATE GA102
VRAM 12 GB
CLOCK SPEED 1665 MHz
TDP 350 W
BUS WIDTH 384 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2021
VS
NVIDIA
GEFORCE

Quadro M6000 24 GB

CORE STATE GM200
VRAM 24 GB
CLOCK SPEED 1114 MHz
TDP 250 W
BUS WIDTH 384 bit
ARCHITECTURE Maxwell 2.0
nm
PROCESS 28 nm
LAUNCH DATE 2016

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
5,077
N/A
geekbench_opencl
170,037
40,098
geekbench_vulkan
192,697
46,425
passmark_directx_10
184
N/A
passmark_directx_11
223
N/A
passmark_directx_12
110
N/A
passmark_directx_9
274
N/A
passmark_g2d
1,091
N/A
passmark_g3d
26,896
N/A
passmark_gpu_compute
15,282
N/A

Analysis: NVIDIA GeForce RTX 3080 Ti vs NVIDIA Quadro M6000 24 GB

The NVIDIA Quadro M6000 24 GB and the NVIDIA GeForce RTX 3080 Ti represent two very different generations of NVIDIA hardware, separated by roughly five years of architectural evolution. The Quadro M6000 is a Maxwell 2.0-era professional card aimed at compute and rendering workloads, while the RTX 3080 Ti is an Ampere-based consumer flagship built for gaming and modern accelerated workloads. Benchmark data from the FACT PACK shows that while both cards occupy the same 83rd percentile against all GPUs, their actual performance characteristics are wildly different, with the RTX 3080 Ti dominating the two shared tests by margins exceeding 75%.

Where Each One Wins

The head-to-head benchmark results in the FACT PACK are unambiguous: the NVIDIA GeForce RTX 3080 Ti wins both recorded comparisons. In geekbench_opencl, the RTX 3080 Ti scores 170,037 against the Quadro M6000’s 40,098, a delta of -76.4% from the Quadro’s perspective. In geekbench_vulkan, the RTX 3080 Ti posts 192,697 versus 46,425 for the Quadro, another -75.9% swing. The wins column shows 0 for the Quadro and 2 for the RTX 3080 Ti.

That said, the Quadro M6000 should not be written off entirely. Its 24 GB of GDDR5 memory is double the RTX 3080 Ti’s 12 GB of GDDR6X, and for workloads that are memory-capacity-bound rather than compute-bound, that large frame buffer is a genuine advantage. The Quadro also has a lower 250 W TDP compared to the RTX 3080 Ti’s 350 W, making it easier to cool and integrate into multi-GPU systems. The RTX 3080 Ti wins on raw compute, bandwidth, and modern API support, while the Quadro M6000 wins on memory size and power draw. For someone running massive datasets that fit in 24 GB but not 12 GB, the Quadro remains relevant despite its age.

Architecture Differences

The two cards are built on fundamentally different architectures. The Quadro M6000 uses the GM200 chip on Maxwell 2.0, fabricated on a 28 nm process at TSMC. The RTX 3080 Ti uses the GA102 chip on Ampere, built on Samsung’s 8 nm node. The transistor counts tell the story: the Quadro has 8,000 million transistors on a 601 mm² die, while the RTX 3080 Ti packs 28,300 million transistors into a slightly larger 628 mm² die. That translates to a transistor density of 13.3M / mm² for Maxwell versus 45.1M / mm² for Ampere, a 3.4x improvement in density.

Feature-wise, the RTX 3080 Ti adds hardware that the Quadro simply lacks. The FACT PACK lists 80 RT cores and 320 tensor cores for the RTX 3080 Ti, while the Quadro has null values for both, meaning it has no dedicated ray tracing or tensor hardware. The shading unit count is also starkly different: 10,240 for the RTX 3080 Ti versus 3,072 for the Quadro. Texture mapping units are 320 versus 192, and ROPs are 112 versus 96. The RTX 3080 Ti also supports DirectX 12 Ultimate (12_2) and offers fp16 compute at 34.10 TFLOPS (1:1), while the Quadro lists no fp16 figure and only supports DirectX 12 (12_1). The RTX 3080 Ti’s memory runs at 19 Gbps effective versus 6.6 Gbps for the Quadro, and it uses GDDR6X rather than GDDR5.

Head-to-Head Benchmarks

The two shared benchmarks in the FACT PACK are geekbench_opencl and geekbench_vulkan, and both are decisive wins for the RTX 3080 Ti. In OpenCL, the RTX 3080 Ti scores 170,037 against the Quadro M6000’s 40,098. That is a 4.24x advantage in raw compute throughput, consistent with the FP32 figures: 34.10 TFLOPS for the RTX 3080 Ti versus 6.844 TFLOPS for the Quadro. The deltaPct of -76.4% means the Quadro scores only 23.6% of the RTX 3080 Ti’s result.

In Vulkan, the gap is similar. The RTX 3080 Ti’s 192,697 dwarfs the Quadro’s 46,425, a delta of -75.9%. Vulkan is a low-level API that benefits from modern hardware features, and the Ampere architecture’s higher shader count and faster memory clearly pay off here. The Quadro’s Maxwell architecture, while still functional, cannot keep pace with the newer GPU’s parallel execution capabilities.

Looking at the broader benchmark context, the RTX 3080 Ti has additional scores in the FACT PACK that the Quadro does not: 3DMark Steel Nomad DX12 at 5,077, Passmark G3D at 26,896, and Passmark GPU Compute at 15,282, among others. The Quadro’s only other benchmark data beyond the two head-to-head tests are its geekbench scores, which are already covered. The RTX 3080 Ti’s average benchmark score is 41,187, while the Quadro’s is 43,262, but this average is skewed by the diverse set of tests the RTX 3080 Ti runs; in the only directly comparable tests, the RTX 3080 Ti wins by a wide margin.

FAQ

Q: Which card has more memory, and does that matter?

A: The Quadro M6000 has 24 GB of GDDR5, while the RTX 3080 Ti has 12 GB of GDDR6X. For workloads that exceed 12 GB of usage, the Quadro’s larger frame buffer is essential. However, the RTX 3080 Ti’s memory bandwidth is 912.4 GB/s versus 317.4 GB/s for the Quadro, so for data that fits, the RTX 3080 Ti is far faster.

Q: Does the RTX 3080 Ti support ray tracing?

A: Yes. The FACT PACK lists 80 RT cores for the RTX 3080 Ti. The Quadro M6000 has no RT cores listed, so it lacks dedicated ray tracing hardware.

Q: What is the power draw difference?

A: The Quadro M6000 has a 250 W TDP, while the RTX 3080 Ti has a 350 W TDP. The Quadro also uses a single 8-pin power connector, while the RTX 3080 Ti uses a single 12-pin connector. Suggested PSU ratings are 600 W and 750 W, respectively.

Q: Are these cards still in production?

A: No. Both are listed as end-of-life in the FACT PACK. The Quadro M6000 was released on 2016-03-04, and the RTX 3080 Ti on 2021-05-30.

Q: How do they compare in the Vulkan API?

A: The RTX 3080 Ti scores 192,697 in geekbench_vulkan, versus 46,425 for the Quadro M6000. That is a delta of -75.9%, meaning the RTX 3080 Ti is roughly 4.15x faster in this test.

Q: Which card has a higher transistor density?

A: The RTX 3080 Ti has 45.1M transistors per mm², while the Quadro M6000 has 13.3M per mm². This reflects the newer 8 nm Samsung process versus the older 28 nm TSMC node.

Specification Differences

The following fields differ between the two cards in the FACT PACK:

  • Chip: GM200 (Quadro) vs GA102 (RTX 3080 Ti)
  • Architecture: Maxwell 2.0 vs Ampere
  • Process Node: 28 nm vs 8 nm
  • Foundry: TSMC vs Samsung
  • Transistors: 8,000 million vs 28,300 million
  • Die Size: 601 mm² vs 628 mm²
  • Transistor Density: 13.3M / mm² vs 45.1M / mm²
  • Base Clock: 988 MHz vs 1365 MHz
  • Boost Clock: 1114 MHz vs 1665 MHz
  • Memory Speed: 1653 MHz / 6.6 Gbps effective vs 1188 MHz / 19 Gbps effective
  • Memory Size: 24 GB vs 12 GB
  • Memory Type: GDDR5 vs GDDR6X
  • Memory Bandwidth: 317.4 GB/s vs 912.4 GB/s
  • Shading Units: 3072 vs 10240
  • TMUs: 192 vs 320
  • ROPs: 96 vs 112
  • RT Cores: null vs 80
  • Tensor Cores: null vs 320
  • Pixel Rate: 106.9 GPixel/s vs 186.5 GPixel/s
  • Texture Rate: 213.9 GTexel/s vs 532.8 GTexel/s
  • FP32: 6.844 TFLOPS vs 34.10 TFLOPS
  • FP16: null vs 34.10 TFLOPS (1:1)
  • TDP: 250 W vs 350 W
  • Power Connectors: 1x 8-pin vs 1x 12-pin
  • Suggested PSU: 600 W vs 750 W
  • Bus Interface: PCIe 3.0 x16 vs PCIe 4.0 x16
  • Display Outputs: 1x DVI, 4x DisplayPort 1.2 vs 1x HDMI 2.1, 3x DisplayPort 1.4a
  • DirectX Support: 12 (12_1) vs 12 Ultimate (12_2)
  • Dimensions: 267 mm length vs 285 mm length (height is the same at 111 mm vs 112 mm; RTX 3080 Ti also lists 40 mm width)
  • Release Date: 2016-03-04 vs 2021-05-30
  • Launch MSRP: 4,999 USD vs 1,199 USD

The Verdict

The data in the FACT PACK makes the performance hierarchy clear. The RTX 3080 Ti is faster in every directly comparable benchmark, with OpenCL and Vulkan scores that are over 4x higher than the Quadro M6000’s. It also has far more compute resources, modern API support, and a much higher memory bandwidth. For any application that benefits from raw shader throughput, tensor cores, or ray tracing, the RTX 3080 Ti is the obvious choice.

The Quadro M6000’s only significant advantages are its 24 GB memory capacity and its lower 250 W TDP. If a workload requires more than 12 GB of video memory, the Quadro is the only one of the two that can handle it. Its lower power draw also makes it easier to deploy in dense multi-GPU configurations. However, those advantages come at a steep performance cost — the Quadro’s 6.844 TFLOPS FP32 is a fraction of the RTX 3080 Ti’s 34.10 TFLOPS, and its 317.4 GB/s bandwidth is less than a third of the RTX 3080 Ti’s 912.4 GB/s.

The RTX 3080 Ti also launched at a far lower MSRP of 1,199 USD versus the Quadro’s 4,999 USD, making it the better choice for anyone not strictly bound by the 24 GB memory requirement. The verdict is straightforward: for modern compute, gaming, or any workload that fits in 12 GB, the RTX 3080 Ti wins decisively. The Quadro M6000 is only sensible for legacy applications that demand its large memory pool and can tolerate its much lower performance.

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 3080 Ti
Quadro M6000 24 GB
Core Specs
Shading Units
10,240
3,072 -70.0%
Shaders
10,240
3,072 -70.0%
TMUs
320
192 -40.0%
ROPs
112
96 -14.3%
SM Count
80
—
Clocks
Base Clock
1365 MHz
988 MHz
Boost Clock
1665 MHz
1114 MHz
Memory Clock
1188 MHz 19 Gbps effective
1653 MHz 6.6 Gbps effective
Memory
Memory Size
12 GB
24 GB
VRAM (MB)
12,288
24,576 +100.0%
Memory Type
GDDR6X
GDDR5
Memory Bus
384 bit
384 bit
Bandwidth
912.4 GB/s
317.4 GB/s
Cache
L1 Cache
128 KB (per SM)
48 KB (per SMM)
L2 Cache
6 MB
3 MB
Performance
Pixel Rate
186.5 GPixel/s
106.9 GPixel/s
Texture Rate
532.8 GTexel/s
213.9 GTexel/s
FP32 (TFLOPS)
34.10 TFLOPS
6.844 TFLOPS
FP64 (TFLOPS)
532.8 GFLOPS (1:64)
213.9 GFLOPS (1:32)
FP16 (TFLOPS)
34.10 TFLOPS (1:1)
—
AI/RT
RT Cores
80
—
Tensor Cores
320
—
Power
TDP
350 W
250 W
TDP (W)
350
250 -28.6%
Suggested PSU
750 W
600 W
Power Connectors
1x 12-pin
1x 8-pin
Architecture
Architecture
Ampere
Maxwell 2.0
GPU Name
GA102
GM200
Generation
GeForce 30
Quadro Maxwell (Mx000)
Process Size
8 nm
28 nm
Transistors
28,300 million
8,000 million
Die Size
628 mm²
601 mm²
Foundry
Samsung
TSMC
Density
45.1M / mm²
13.3M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.6
5.2
Shader Model
6.8
6.8
Physical
Slot Width
Dual-slot
Dual-slot
Length
285 mm 11.2 inches
267 mm 10.5 inches
Height
112 mm 4.4 inches
111 mm 4.4 inches
Outputs
1x HDMI 2.13x DisplayPort 1.4a
1x DVI4x DisplayPort 1.2
Bus Interface
PCIe 4.0 x16
PCIe 3.0 x16
Other
Launch Price
1,199 USD
4,999 USD
Production
End-of-life
End-of-life
Predecessor
GeForce 20
Quadro Kepler
Successor
GeForce 40
Quadro Pascal
View GeForce RTX 3080 Ti Details View Quadro M6000 24 GB Details