NVIDIA GeForce RTX 3060 Ti GDDR6X vs NVIDIA Quadro P1000 Comparison

NVIDIA
GEFORCE

NVIDIA GeForce RTX 3060 Ti GDDR6X

CORE STATE GA104
VRAM 8 GB
CLOCK SPEED 1665 MHz
TDP 225 W
BUS WIDTH 256 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2022
VS
NVIDIA
GEFORCE

Quadro P1000

CORE STATE GP107
VRAM 4 GB
CLOCK SPEED 1480 MHz
TDP 47 W
BUS WIDTH 128 bit
ARCHITECTURE Pascal
nm
PROCESS 14 nm
LAUNCH DATE 2017

PERFORMANCE BENCHMARKS

3dmark_3dmark_steel_nomad_dx12
2,795
N/A
geekbench_opencl
N/A
13,584
geekbench_vulkan
N/A
7,739
passmark_directx_10
N/A
21
passmark_directx_11
N/A
31
passmark_directx_12
N/A
19
passmark_directx_9
N/A
79
passmark_g2d
N/A
589
passmark_g3d
N/A
4,512
passmark_gpu_compute
N/A
1,891

Analysis: NVIDIA GeForce RTX 3060 Ti GDDR6X vs NVIDIA Quadro P1000

Where Each One Wins

The benchmark data splits these two NVIDIA cards into completely different performance tiers, and the use-case split is stark. The Quadro P1000, a 2017 Pascal-era professional card, posts an average benchmark score of 3163 across nine tests spanning OpenCL, Vulkan, DirectX 9 through 12, and compute workloads. The RTX 3060 Ti GDDR6X, a 2022 Ampere gaming card, has only a single recorded benchmark — 3DMark Steel Nomad DX12 at 2795 — which places its average at that same figure.

Looking at the percentile rankings, the P1000 sits at the 20th percentile of all GPUs, while the RTX 3060 Ti GDDR6X sits at the 18th percentile. The data does not show any head-to-head benchmark wins for either card, as the headToHeadBenchmarks array is empty. However, the available scores tell a clear story: the P1000 wins where multi-API coverage matters, with nine distinct benchmark results across different graphics and compute interfaces. The RTX 3060 Ti GDDR6X wins in raw DX12 performance, scoring 2795 in 3DMark Steel Nomad, which is a demanding modern workload.

The P1000 shows strength in legacy and compute-adjacent tests. Its PassMark DirectX 9 score of 79 is its highest per-test result, and its PassMark G3D score of 4512 dwarfs its own compute score of 1891. The RTX 3060 Ti GDDR6X, with its 3DMark Steel Nomad score, demonstrates that it is built for contemporary DX12 titles and ray-traced content, even though its percentile ranking appears lower due to the limited test data.

For professional workflows, the P1000’s four mini-DisplayPort 1.4a outputs and single-slot design make it a fit for multi-display setups where the RTX 3060 Ti’s dual-slot 242 mm length and 1x HDMI plus 3x DisplayPort configuration may not fit. The data indicates that the P1000 is the card for legacy API compatibility and dense workstation environments, while the RTX 3060 Ti is the card for modern DX12 gaming and rendering workloads.

Architecture Differences

The two cards come from different architectural eras. The Quadro P1000 uses the GP107 chip on the Pascal architecture, built on a 14 nm process at Samsung. The RTX 3060 Ti GDDR6X uses the GA104 chip on the Ampere architecture, also fabricated by Samsung but on an 8 nm process. The transistor counts reflect the generational leap: the P1000 packs 3,300 million transistors on a 132 mm² die, giving a density of 25.0M transistors per mm². The RTX 3060 Ti GDDR6X packs 17,400 million transistors on a 392 mm² die, with a density of 44.4M per mm² — nearly double the density per square millimeter.

Memory configurations differ substantially. The P1000 has 4 GB of GDDR5 on a 128-bit bus, delivering 80.19 GB/s bandwidth at 5 Gbps effective. The RTX 3060 Ti GDDR6X has 8 GB of GDDR6X on a 256-bit bus, delivering 608.3 GB/s bandwidth at 19 Gbps effective — more than seven times the bandwidth. The compute resources tell a similar story. The P1000 has 640 shading units, 40 texture mapping units, and 32 ROPs. The RTX 3060 Ti GDDR6X has 4,864 shading units, 152 TMUs, and 80 ROPs. Critically, the Ampere card features 38 RT cores and 152 tensor cores, while the Pascal card has none.

Clock speeds and rates follow the expected pattern. The P1000 runs at a 1266 MHz base and 1480 MHz boost, while the RTX 3060 Ti GDDR6X runs at 1410 MHz base and 1665 MHz boost. The pixel rate for the P1000 is 47.36 GPixel/s and texture rate is 59.20 GTexel/s. The RTX 3060 Ti GDDR6X achieves 133.2 GPixel/s and 253.1 GTexel/s. Floating-point performance is 1.894 TFLOPS for the P1000 versus 16.20 TFLOPS for the RTX 3060 Ti — an 8.5x difference. Notably, the FP16 ratio differs: the P1000 runs FP16 at just 29.60 GFLOPS (1:64 ratio), while the RTX 3060 Ti runs FP16 at the full 16.20 TFLOPS (1:1 ratio).

Power and physical characteristics diverge. The P1000 draws 47 W with no power connectors and a suggested 200 W PSU, in a single-slot 150 mm length and 69 mm height. The RTX 3060 Ti GDDR6X draws 225 W, requires a 1x 12-pin connector and a 550 W PSU, and measures 242 mm by 112 mm in a dual-slot form factor. API support also differs: the P1000 supports DirectX 12 (12_1), while the RTX 3060 Ti supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6 and Vulkan 1.4. The P1000 uses PCIe 3.0 x16, the RTX 3060 Ti uses PCIe 4.0 x16.

Head-to-Head Benchmarks

There are no direct head-to-head benchmark scores in the data, meaning the cards were never tested against each other in the same workload. However, the individual scores allow for meaningful comparison across the tests that exist. The P1000’s best performance comes in PassMark G3D at 4512, which is a general 3D graphics test. Its PassMark GPU Compute score is 1891, roughly 42% of its G3D score, indicating that compute tasks are not its strength. Its OpenCL score of 13584 and Vulkan score of 7739 provide additional data points for cross-platform compute and graphics.

The RTX 3060 Ti GDDR6X has exactly one score: 2795 in 3DMark Steel Nomad DX12. This is a modern, demanding benchmark that stresses ray tracing and DX12 features. The P1000 has no equivalent DX12 test in its suite — its highest DirectX score is 79 in DirectX 9, followed by 31 in DirectX 11, 21 in DirectX 10, and 19 in DirectX 12. The gap between the two cards’ DX12 capabilities is enormous: the RTX 3060 Ti scores 2795 in Steel Nomad, while the P1000 scores 19 in PassMark’s DirectX 12 test. That is a 147x difference in raw DX12 score, though the tests are not directly comparable due to different benchmark suites.

The nearest rivals for each card provide context. The P1000’s average score of 3163 is 0.6% below the Intel Arc Pro B60 (3182), 1.5% below the NVIDIA GeForce GT 640 (3210), 2.9% above the NVIDIA GeForce RTX 5080 SUPER (3075), and 3.8% below the NVIDIA GeForce 920M (3287). The RTX 3060 Ti GDDR6X’s average of 2795 is 0.2% below the AMD Radeon 550 (2801), 0.4% above the NVIDIA GeForce 820M (2784), 1.6% above the Intel UHD Graphics 610 (2752), and 3.4% below the NVIDIA GeForce RTX 4010 (2893). These deltas place both cards in a strange neighborhood — the 3060 Ti’s only benchmark may be an outlier, or the data may be incomplete, but as recorded, the 3060 Ti sits below the P1000 in average score.

The Verdict

The data supports a clear split. Choose the NVIDIA Quadro P1000 if you need a low-power, single-slot professional card with 4x mini-DisplayPort outputs, legacy API support down to DirectX 9, and a 47 W TDP that requires no external power connector. Its nine benchmark scores show broad compatibility across OpenCL, Vulkan, and multiple DirectX versions, making it a flexible option for older workstation software. Its 150 mm length fits compact chassis, and its 3,300 million transistor count on 14 nm Pascal is modest but proven.

Choose the NVIDIA GeForce RTX 3060 Ti GDDR6X if you need raw modern performance: 16.20 TFLOPS FP32, 608.3 GB/s memory bandwidth, 38 RT cores, and 152 tensor cores for ray tracing and AI workloads. Its single 3DMark Steel Nomad score of 2795, while low relative to its specs, represents a DX12 Ultimate workload that the P1000 cannot approach. The 8 GB GDDR6X memory on a 256-bit bus is double the P1000’s 4 GB on 128-bit. The 225 W TDP and 550 W suggested PSU indicate a performance-first design.

From the percentile data, both cards rank in the low 20th and 18th percentiles respectively, meaning neither is a top-tier performer in the broader GPU landscape. However, the P1000’s average score of 3163 exceeds the RTX 3060 Ti’s 2795 average, driven by the P1000’s multiple strong scores in PassMark and Geekbench tests. The 3060 Ti’s performance is concentrated in a single DX12 benchmark, which may not reflect its full capability. The data as presented favors the P1000 for average performance across a wide range of tests, and the RTX 3060 Ti only for the specific DX12 Steel Nomad workload.

FAQ

Q: Which card has a higher average benchmark score?

A: The Quadro P1000 averages 3163 across nine tests, while the RTX 3060 Ti GDDR6X averages 2795 from its single 3DMark Steel Nomad score.

Q: What is the memory bandwidth difference?

A: The P1000 has 80.19 GB/s from 4 GB GDDR5 on a 128-bit bus, while the RTX 3060 Ti has 608.3 GB/s from 8 GB GDDR6X on a 256-bit bus.

Q: Do either cards support ray tracing?

A: The RTX 3060 Ti GDDR6X has 38 RT cores and 152 tensor cores; the Quadro P1000 has no RT cores or tensor cores in its specification.

Q: What is the FP32 performance gap?

A: The P1000 delivers 1.894 TFLOPS, while the RTX 3060 Ti delivers 16.20 TFLOPS — an 8.5x difference.

Q: Which card is more suitable for a small form factor build?

A: The P1000 is single-slot, 150 mm long and 69 mm tall, drawing 47 W with no power connector. The RTX 3060 Ti is dual-slot, 242 mm long and 112 mm tall, drawing 225 W with a 12-pin connector.

Q: What API levels does each card support?

A: The P1000 supports DirectX 12 (12_1), while the RTX 3060 Ti supports DirectX 12 Ultimate (12_2). Both support OpenGL 4.6 and Vulkan 1.4.

Specification Differences

| Specification | Quadro P1000 | RTX 3060 Ti GDDR6X |

|---|---|---|

| Architecture | Pascal | Ampere |

| Process Node | 14 nm | 8 nm |

| Transistors | 3,300 million | 17,400 million |

| Die Size | 132 mm² | 392 mm² |

| Base Clock | 1266 MHz | 1410 MHz |

| Boost Clock | 1480 MHz | 1665 MHz |

| Memory Size | 4 GB | 8 GB |

| Memory Type | GDDR5 | GDDR6X |

| Memory Bus | 128 bit | 256 bit |

| Memory Bandwidth | 80.19 GB/s | 608.3 GB/s |

| Shading Units | 640 | 4864 |

| TMUs | 40 | 152 |

| ROPs | 32 | 80 |

| RT Cores | None | 38 |

| Tensor Cores | None | 152 |

| Pixel Rate | 47.36 GPixel/s | 133.2 GPixel/s |

| Texture Rate | 59.20 GTexel/s | 253.1 GTexel/s |

| FP32 | 1.894 TFLOPS | 16.20 TFLOPS |

| FP16 | 29.60 GFLOPS (1:64) | 16.20 TFLOPS (1:1) |

| TDP | 47 W | 225 W |

| Slot Width | Single-slot | Dual-slot |

| Power Connectors | None | 1x 12-pin |

| Suggested PSU | 200 W | 550 W |

| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |

| Display Outputs | 4x mini-DisplayPort 1.4a | 1x HDMI 2.1, 3x DisplayPort 1.4a |

| DirectX | 12 (12_1) | 12 Ultimate (12_2) |

| Length | 150 mm | 242 mm |

| Height | 69 mm | 112 mm |

| Release Date | 2017-02-06 | 2022-10-18 |

DETAILED SPECIFICATIONS

SPECIFICATION
RTX 3060 Ti GDDR6X
Quadro P1000
Core Specs
Shading Units
4,864
640 -86.8%
Shaders
4,864
640 -86.8%
TMUs
152
40 -73.7%
ROPs
80
32 -60.0%
SM Count
38
5 -86.8%
Clocks
Base Clock
1410 MHz
1266 MHz
Boost Clock
1665 MHz
1480 MHz
Memory Clock
1188 MHz 19 Gbps effective
1253 MHz 5 Gbps effective
Memory
Memory Size
8 GB
4 GB
VRAM (MB)
8,192
4,096 -50.0%
Memory Type
GDDR6X
GDDR5
Memory Bus
256 bit
128 bit
Bandwidth
608.3 GB/s
80.19 GB/s
Cache
L1 Cache
128 KB (per SM)
48 KB (per SM)
L2 Cache
4 MB
1024 KB
Performance
Pixel Rate
133.2 GPixel/s
47.36 GPixel/s
Texture Rate
253.1 GTexel/s
59.20 GTexel/s
FP32 (TFLOPS)
16.20 TFLOPS
1.894 TFLOPS
FP64 (TFLOPS)
253.1 GFLOPS (1:64)
59.20 GFLOPS (1:32)
FP16 (TFLOPS)
16.20 TFLOPS (1:1)
29.60 GFLOPS (1:64)
AI/RT
RT Cores
38
—
Tensor Cores
152
—
Power
TDP
225 W
47 W
TDP (W)
225
47 -79.1%
Suggested PSU
550 W
200 W
Power Connectors
1x 12-pin
None
Architecture
Architecture
Ampere
Pascal
GPU Name
GA104
GP107
Generation
GeForce 30
Quadro Pascal (Px000)
Process Size
8 nm
14 nm
Transistors
17,400 million
3,300 million
Die Size
392 mm²
132 mm²
Foundry
Samsung
Samsung
Density
44.4M / mm²
25.0M / mm²
API Support
DirectX
12 Ultimate (12_2)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
8.6
6.1
Shader Model
6.8
6.8
Physical
Slot Width
Dual-slot
Single-slot
Length
242 mm 9.5 inches
150 mm 5.9 inches
Height
112 mm 4.4 inches
69 mm 2.7 inches
Outputs
1x HDMI 2.13x DisplayPort 1.4a
4x mini-DisplayPort 1.4a
Bus Interface
PCIe 4.0 x16
PCIe 3.0 x16
Other
Production
End-of-life
End-of-life
Predecessor
GeForce 20
Quadro Maxwell
Successor
GeForce 40
Quadro Volta
View GeForce RTX 3060 Ti GDDR6X Details View Quadro P1000 Details