NVIDIA GeForce RTX 3050 OEM vs NVIDIA RTX PRO 6000 Blackwell Comparison
NVIDIA GeForce RTX 3050 OEM
RTX PRO 6000 Blackwell
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce RTX 3050 OEM vs NVIDIA RTX PRO 6000 Blackwell
# Head-to-Head Benchmarks
The RTX PRO 6000 Blackwell and RTX 3050 OEM occupy completely different tiers of NVIDIA's lineup, and the benchmark data reflects this gulf. The RTX PRO 6000 Blackwell posts a 3DMark Steel Nomad DX12 score of 16,408, while the RTX 3050 OEM's aggregate average benchmark score sits at 15,199 across nine different tests. Direct comparison is complicated by the fact that the two cards share no common benchmark entry in the data — the PRO 6000 has only the Steel Nomad result, while the 3050 OEM has Geekbench OpenCL, Vulkan, and Passmark entries. However, relative positioning against their respective nearest rivals tells the story.
The RTX PRO 6000 Blackwell's Steel Nomad score of 16,408 places it within 0.6% of the NVIDIA GeForce RTX 5090 D V2 (16,504), essentially a statistical tie. It also edges out the AMD Radeon PRO W7500 (16,415) by a negligible margin, and beats the AMD Radeon RX 5700 XT (16,361) by 0.3%. The AMD Radeon Pro 5600M (16,351) trails by 0.4%. These deltas are remarkably small, suggesting that at this benchmark's workload, the PRO 6000's massive compute resources are not fully utilized, or the test is bound by other factors.
The RTX 3050 OEM, by contrast, shows a different competitive landscape. Its 15,199 average benchmark score puts it 0.2% ahead of the AMD Radeon RX 7600 (15,171), and 0.5% ahead of the AMD Radeon 680M (15,270) — wait, that delta is negative, meaning the 680M actually scores higher. The data shows the 3050 OEM trails the AMD Radeon 680M by 0.5% and the NVIDIA GeForce GTX 580 by 0.5% (15,283), while sitting 0.6% behind the NVIDIA GeForce RTX 2060 (15,290). This clustering around the 15,200 mark indicates the 3050 OEM is firmly in the mid-range performance tier, despite its entry-level positioning.
The percentile rankings reinforce the separation: the RTX PRO 6000 Blackwell sits at the 59th percentile of all GPUs, while the RTX 3050 OEM is at the 57th percentile. Despite the enormous specification disparity, their percentile positions are only two points apart. This is a curious data quirk — the PRO 6000's single benchmark result may not capture its full potential, or the Steel Nomad test is not representative of the card's strengths. The 3050 OEM's average spans multiple test types, including compute-heavy Passmark GPU Compute (5,779) and graphics tests like Passmark G3D (11,857).
# Where Each One Wins
The RTX PRO 6000 Blackwell wins decisively in raw graphics compute, as evidenced by its 16,408 Steel Nomad score representing 126.0 TFLOPS of FP32 performance. This is a workstation-class card designed for professional rendering, simulation, and AI workloads. Its 96 GB of GDDR7 memory with 1.79 TB/s bandwidth makes it suited for large datasets and high-resolution textures that would exhaust the 3050 OEM's 8 GB GDDR6 frame buffer with 224.0 GB/s bandwidth.
The RTX 3050 OEM wins in accessibility and compatibility with existing systems. Its 130 W TDP and 300 W suggested PSU requirement mean it can drop into a wide range of desktops without power supply upgrades, whereas the PRO 6000 demands a 600 W TDP and 1000 W suggested PSU. The 3050 OEM's PCIe 4.0 x8 interface is more broadly compatible with older motherboards than the PRO 6000's PCIe 5.0 x16, though the newer standard offers higher bandwidth potential.
For gaming and consumer workloads, the 3050 OEM's benchmark spread shows balanced performance: Passmark G3D at 11,857, DirectX 11 at 86, DirectX 12 at 58, and DirectX 9 at 137. The PRO 6000 has no comparable gaming benchmarks in the data, so its gaming prowess cannot be quantified here. The 3050 OEM's Geekbench scores of 60,740 (OpenCL) and 57,103 (Vulkan) suggest solid compute performance for its class, though these numbers pale against the PRO 6000's theoretical compute ceiling.
The PRO 6000 wins decisively on memory capacity and bandwidth — 12 times the memory and 8 times the bandwidth of the 3050 OEM. The 3050 OEM wins on power efficiency in absolute terms: 130 W versus 600 W, meaning the 3050 OEM draws roughly 22% of the PRO 6000's power while delivering about 6.4% of the FP32 throughput (8.087 TFLOPS vs 126.0 TFLOPS). The PRO 6000 is actually more efficient per watt, but the 3050 OEM is far easier to integrate into typical consumer systems.
# Architecture Differences
The RTX PRO 6000 Blackwell uses the GB202 chip built on a 5 nm TSMC process, while the RTX 3050 OEM uses the GA106 chip on Samsung's 8 nm node. This process advantage is significant: 5 nm allows for substantially higher transistor density, and the numbers confirm it. The GB202 packs 92,200 million transistors onto a 750 mm² die, yielding a density of 122.9 million transistors per square millimeter. The GA106 contains 12,000 million transistors on a 276 mm² die, with a density of 43.5 million per square millimeter. The Blackwell chip is roughly 2.8 times denser and 7.7 times larger in transistor count.
Architecturally, the PRO 6000 uses Blackwell 2.0, while the 3050 OEM uses Ampere. This generational leap brings substantial changes to the compute pipeline. The PRO 6000 features 24,064 shading units, 752 TMUs, and 192 ROPs, compared to the 3050 OEM's 2,304 shading units, 72 TMUs, and 32 ROPs. The PRO 6000 has 188 RT cores and 752 tensor cores; the 3050 OEM has 18 RT cores and 72 tensor cores. These ratios are not uniform — the PRO 6000 has roughly 10.4 times the shading units but 10.4 times the RT cores and 10.4 times the tensor cores, indicating a consistent scaling of the architecture.
Memory architecture differs fundamentally. The PRO 6000 uses GDDR7 on a 512-bit bus, achieving 1.79 TB/s bandwidth. The 3050 OEM uses GDDR6 on a 128-bit bus, delivering 224.0 GB/s. The PRO 6000's memory clock is 1750 MHz with 28 Gbps effective data rate, while the 3050 OEM's memory clock is 1750 MHz with 14 Gbps effective. Both run at the same base clock, but the PRO 6000's wider bus and faster effective data rate produce the massive bandwidth advantage.
The PRO 6000's render output capabilities are dramatically higher: 502.5 GPixel/s pixel rate and 1,968.0 GTexel/s texture rate, versus 56.16 GPixel/s and 126.4 GTexel/s for the 3050 OEM. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API compatibility is identical.
# Specification Differences
The two cards differ on nearly every measurable specification. The PRO 6000's base clock is 1590 MHz with a boost of 2617 MHz; the 3050 OEM runs at 1515 MHz base and 1755 MHz boost. The PRO 6000's boost clock is 49% higher, which compounds with its massive shader count.
Memory: 96 GB GDDR7 versus 8 GB GDDR6. Bus width: 512-bit versus 128-bit. Bandwidth: 1.79 TB/s versus 224.0 GB/s. These differences make the PRO 6000 suitable for workloads that require huge resident datasets, while the 3050 OEM is limited to more modest memory footprints.
Power and cooling: the PRO 6000 has a 600 W TDP with a 1x 16-pin power connector and a 1000 W suggested PSU, in a dual-slot form factor measuring 304 mm x 137 mm x 40 mm. The 3050 OEM has a 130 W TDP with a 1x 8-pin connector and a 300 W suggested PSU, also dual-slot but smaller at 242 mm x 112 mm.
Display outputs: the PRO 6000 has 4x DisplayPort 2.1b; the 3050 OEM has 1x HDMI 2.1 and 3x DisplayPort 1.4a. The PRO 6000 supports the newer DisplayPort standard, enabling higher refresh rates and resolutions over that interface.
Bus interface: PCIe 5.0 x16 for the PRO 6000 versus PCIe 4.0 x8 for the 3050 OEM. This difference matters for data transfer between GPU and system memory, particularly for workloads that stream data.
Production status: the PRO 6000 is Active, released 2025-03-17. The 3050 OEM is End-of-life, released 2022-01-03. The 3050 OEM's predecessor is GeForce 20 and successor is GeForce 40; the PRO 6000's predecessor is Workstation Ada with no successor listed.
The PRO 6000 has a launch MSRP of 8,565 USD. The 3050 OEM has no launch MSRP in the data.
# FAQ
Q: Which GPU has higher raw compute performance?
A: The RTX PRO 6000 Blackwell delivers 126.0 TFLOPS FP32, compared to 8.087 TFLOPS for the RTX 3050 OEM. The PRO 6000's 3DMark Steel Nomad score is 16,408, while the 3050 OEM's average benchmark score is 15,199.
Q: How do these cards compare to their nearest competitors?
A: The PRO 6000 trades within 0.6% of the RTX 5090 D V2, and edges the Radeon PRO W7500 by a rounding-level margin. The 3050 OEM is within 0.6% of the RTX 2060, GTX 580, and Radeon 680M, with the RX 7600 just 0.2% behind.
Q: What are the memory differences?
A: The PRO 6000 has 96 GB GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth. The 3050 OEM has 8 GB GDDR6 on a 128-bit bus with 224.0 GB/s bandwidth. The PRO 6000 has 12 times the capacity and 8 times the bandwidth.
Q: Which card requires less power?
A: The RTX 3050 OEM has a 130 W TDP and 300 W suggested PSU. The PRO 6000 has a 600 W TDP and 1000 W suggested PSU. The 3050 OEM is far easier to power in a typical consumer system.
Q: Are there differences in display output capabilities?
A: Yes. The PRO 6000 provides 4x DisplayPort 2.1b outputs. The 3050 OEM provides 1x HDMI 2.1 and 3x DisplayPort 1.4a. The PRO 6000 supports the newer DisplayPort 2.1b standard.
Q: What is the production status of each card?
A: The RTX PRO 6000 Blackwell is Active, released 2025-03-17. The RTX 3050 OEM is End-of-life, released 2022-01-03, with the GeForce 40 series as its successor.