NVIDIA GeForce MX570 A vs NVIDIA GeForce RTX 3080 Ti Comparison

The NVIDIA GeForce RTX 3080 Ti and the NVIDIA GeForce MX570 A occupy opposite ends of the laptop and desktop GPU spectrum, despite sharing the Ampere architecture name. The benchmark data available for direct comparison is limited to two compute-focused tests, but the margins are so large that they define the entire relationship between these two parts. The RTX 3080 Ti is a desktop-class powerhouse, while the MX570 A is a low-power mobile chip designed for basic acceleration.

Head-to-Head Benchmarks

The head-to-head results are stark, with the RTX 3080 Ti winning both available tests by a massive margin. In Geekbench OpenCL, the RTX 3080 Ti scores 170,037 against the MX570 A’s 39,780. This represents a 327.4% advantage for the desktop card. The gap widens further in Geekbench Vulkan, where the RTX 3080 Ti scores 192,697 versus 37,601 for the MX570 A, a 412.5% lead. These are not incremental differences; they are generational leaps in raw compute throughput.

The data shows that the RTX 3080 Ti’s average benchmark score of 41,187 places it in the 83rd percentile of all GPUs, while the MX570 A sits just below at the 81st percentile with an average score of 38,691. This close percentile ranking is surprising given the head-to-head deltas, but it reflects the fact that the MX570 A’s nearest rivals are other low-power and mobile parts like the AMD Radeon Pro 580X (0% delta) and the NVIDIA GeForce MX570 (1% delta). In contrast, the RTX 3080 Ti’s nearest rivals include the NVIDIA Tesla M40 and the AMD Radeon Pro 5300, which are much older or workstation-focused products.

Looking at the broader benchmark suite, the RTX 3080 Ti shows its strength across multiple APIs. It scores 26,896 in Passmark G3D, 15,282 in Passmark GPU Compute, and 1,091 in Passmark G2D. It also posts a 3DMark Steel Nomad DX12 score of 5,077. The MX570 A has no results in these tests, so its compute performance in OpenCL and Vulkan is the only available metric. In those two tests, the RTX 3080 Ti is between 4.27x and 5.12x faster, which is consistent with its much larger die, higher transistor count, and wider memory bus.

Where Each One Wins

The RTX 3080 Ti wins everywhere in the data, but the nature of the wins matters. In OpenCL, which is often used for general-purpose compute and some rendering workloads, the 327.4% lead indicates the RTX 3080 Ti can handle tasks like video encoding, 3D rendering, and scientific simulations that would be impractical on the MX570 A. The Vulkan result is even more decisive at 412.5%, suggesting that the RTX 3080 Ti is better suited for modern game engines and Vulkan-based applications that can leverage its full compute and ray-tracing hardware.

The MX570 A does not win any benchmark in the data, but its existence in the 81st percentile suggests it is not a useless part. Its average score of 38,691 is close to the RTX 3080 Ti’s nearest rival, the AMD Radeon Pro 5300, which scores 40,870. This means the MX570 A is in the same performance class as some older workstation GPUs. However, its 2 GB memory capacity and 64-bit bus limit it to light tasks like basic photo editing, hardware-accelerated video playback, and older or less demanding games at low settings. The RTX 3080 Ti, with its 12 GB memory and 384-bit bus, is for high-resolution gaming, content creation, and professional workloads where memory bandwidth is critical.

In practice, the MX570 A is a chip for thin-and-light laptops where battery life and thermals are the priority. The RTX 3080 Ti is a desktop card that requires substantial power and cooling. The data supports this split: the RTX 3080 Ti has a TDP of 350 W, while the MX570 A is rated at just 25 W.

FAQ

Q: How much faster is the RTX 3080 Ti in Geekbench Vulkan?

A: The RTX 3080 Ti scores 192,697 versus 37,601 for the MX570 A, which is a 412.5% higher score.

Q: What is the average benchmark score for each GPU?

A: The RTX 3080 Ti has an average benchmark score of 41,187, while the MX570 A averages 38,691.

Q: Which GPU has a higher percentile ranking among all GPUs?

A: The RTX 3080 Ti is in the 83rd percentile, slightly ahead of the MX570 A, which is in the 81st percentile.

Q: Do both GPUs support the same DirectX version?

A: Yes, both support DirectX 12 Ultimate (12_2), along with OpenGL 4.6 and Vulkan 1.4.

Q: What is the memory size difference?

A: The RTX 3080 Ti has 12 GB of GDDR6X memory, while the MX570 A has 2 GB of GDDR6 memory.

Q: What are the closest rivals to each GPU based on average score?

A: The RTX 3080 Ti’s closest rival is the AMD Radeon Pro 5300 (0.8% delta), and the MX570 A’s closest rival is the AMD Radeon Pro 580X (0% delta).

Specification Differences

The specification gap is as wide as the benchmark gap. The RTX 3080 Ti uses the GA102 chip with 28,300 million transistors on a 628 mm² die, while the MX570 A uses the GA107SB chip with 8,700 million transistors on a 200 mm² die. The transistor densities are similar (45.1M/mm² versus 43.5M/mm²), but the total resources are vastly different.

The RTX 3080 Ti has 10,240 shading units, 320 TMUs, and 112 ROPs. The MX570 A has 2,048 shading units, 64 TMUs, and 32 ROPs. This means the desktop card has 5x the shader count and 5x the texture mapping units. The RTX 3080 Ti also has 80 RT cores and 320 tensor cores, compared to 16 RT cores and 64 tensor cores on the MX570 A.

Clock speeds differ in favor of the larger card. The RTX 3080 Ti boosts to 1665 MHz from a base of 1365 MHz. The MX570 A boosts to 1155 MHz from a base of 832 MHz. Memory is another major divider: the RTX 3080 Ti uses 12 GB of GDDR6X on a 384-bit bus with 912.4 GB/s bandwidth, while the MX570 A uses 2 GB of GDDR6 on a 64-bit bus with 96.00 GB/s bandwidth. That is a 9.5x difference in memory bandwidth.

The RTX 3080 Ti is a dual-slot card measuring 285 mm in length, 112 mm in height, and 40 mm in width. It requires a 1x 12-pin power connector and a 750 W suggested PSU. The MX570 A is an IGP (integrated graphics processor) with no power connectors and dimensions listed as portable-device dependent. The RTX 3080 Ti has a TDP of 350 W; the MX570 A is rated at 25 W.

Architecture Differences

Both GPUs are built on Ampere architecture using Samsung’s 8 nm process node. However, the implementation differs significantly. The RTX 3080 Ti uses the GA102 die, which is the largest consumer Ampere chip. The MX570 A uses the GA107SB, a smaller, cut-down chip designed for low-power mobile systems.

The transistor counts reflect this: 28,300 million versus 8,700 million. The RTX 3080 Ti has a 628 mm² die, while the MX570 A is only 200 mm². Despite the size difference, the transistor density is nearly identical (45.1M/mm² vs 43.5M/mm²), indicating the same manufacturing process is used.

Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. They also both have RT cores and tensor cores, meaning ray tracing and DLSS are technically supported on the MX570 A. However, the RTX 3080 Ti has 80 RT cores and 320 tensor cores, while the MX570 A has 16 RT cores and 64 tensor cores. The FP32 compute is 34.10 TFLOPS for the RTX 3080 Ti versus 4.731 TFLOPS for the MX570 A. The pixel rate is 186.5 GPixel/s versus 36.96 GPixel/s, and the texture rate is 532.8 GTexel/s versus 73.92 GTexel/s.

The memory subsystem is also architecturally distinct. The RTX 3080 Ti uses GDDR6X with a 384-bit interface, while the MX570 A uses GDDR6 with a 64-bit interface. The RTX 3080 Ti’s memory clock is 1188 MHz (19 Gbps effective), while the MX570 A’s is 1500 MHz (12 Gbps effective). The bus interface is PCIe 4.0 x16 for the desktop card and PCIe 4.0 x8 for the mobile chip.

The Verdict

Choose the RTX 3080 Ti if you need maximum compute performance, high-resolution gaming, or professional workloads. The data shows it is over 300% faster in OpenCL and over 400% faster in Vulkan than the MX570 A. Its 12 GB memory and 912.4 GB/s bandwidth make it suitable for 4K texture-heavy applications. It is an end-of-life product with a launch MSRP of 1,199 USD, but its performance remains relevant.

Choose the MX570 A if you are building a thin-and-light laptop where power consumption is critical. At 25 W TDP, it offers 4.731 TFLOPS of FP32 performance, which is adequate for basic acceleration. Its 81st percentile ranking shows it competes with parts like the AMD Radeon Pro 580X. It is not for gaming or heavy compute; the 2 GB memory and 64-bit bus are its fundamental limits.

The verdict is clear from the data: the RTX 3080 Ti is a desktop-class workhorse, and the MX570 A is an efficiency-focused mobile chip. Do not confuse the Ampere naming or the similar API support with comparable performance. The 412.5% Vulkan delta is the single largest indicator of their respective tiers. If your workload fits the RTX 3080 Ti’s capabilities, the MX570 A will not suffice. Conversely, if you need the MX570 A’s low power draw, the RTX 3080 Ti’s 350 W requirement makes it unsuitable for that form factor.