NVIDIA GeForce GTX 770M vs NVIDIA GeForce RTX 5070 Ti SUPER Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 770M

CORE STATE GK106
VRAM 3 GB
CLOCK SPEED 797 MHz
TDP 75 W
BUS WIDTH 192 bit
ARCHITECTURE Kepler
nm
PROCESS 28 nm
LAUNCH DATE 2013
VS
NVIDIA
GEFORCE

GeForce RTX 5070 Ti SUPER

CORE STATE GB203
VRAM 16 GB
CLOCK SPEED 2452 MHz
TDP 350 W
BUS WIDTH 256 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2026

PERFORMANCE BENCHMARKS

geekbench_metal
3,448
N/A
geekbench_opencl
8,552
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
6,269.5

Analysis: NVIDIA GeForce GTX 770M vs NVIDIA GeForce RTX 5070 Ti SUPER

The NVIDIA GeForce RTX 5070 Ti SUPER and the NVIDIA GeForce GTX 770M represent two vastly different eras of GPU design, separated by over a decade of architectural evolution. The RTX 5070 Ti SUPER is an active, high-end desktop part built on TSMC's 5 nm process, while the GTX 770M is an end-of-life mobile chip from 2013 fabricated on a 28 nm node. Their benchmark profiles, however, show a surprisingly narrow gap in aggregate scoring, with the newer card averaging 6270 points against the older card's 6000 points. This comparison walks through the data to show where each card holds an advantage, despite the generational chasm.

Head-to-Head Benchmarks

The benchmark data available for these two cards draws from different test suites, making direct apples-to-apples comparisons limited. The RTX 5070 Ti SUPER has a single recorded result in the 3DMark Steel Nomad DX12 test, scoring 6269.5 points. The GTX 770M, by contrast, has results in Geekbench Metal and Geekbench OpenCL, scoring 3448 and 8552 respectively. The average benchmark score for the RTX 5070 Ti SUPER is 6270, while the GTX 770M posts a lower average of 6000, a difference of 270 points or roughly 4.5% in favor of the newer part.

Nearest rival data contextualizes these scores further. The RTX 5070 Ti SUPER sits in the 36th percentile of all GPUs, with its closest competitor being the NVIDIA GeForce RTX 4070 Ti SUPER AD102 at an identical average score of 6270 (0% delta). The AMD FirePro W600 trails by 0.8% with a score of 6223, while the NVIDIA Quadro K620 is 0.2% ahead at 6282. The GTX 770M, in the 35th percentile, matches the AMD Radeon RX 6400 at 6001 (0% delta) and edges out the NVIDIA RTX PRO 6000 Blackwell Server by 0.1% (5996). The delta between the two cards' percentile ranks is minimal — just one percentile point — yet the RTX 5070 Ti SUPER's raw score advantage is consistent across its single benchmark.

The lack of shared benchmark tests means the data cannot show a direct head-to-head win for either card in identical workloads. What the numbers do reveal is that the RTX 5070 Ti SUPER delivers a higher peak score in its DX12 test than the GTX 770M achieves in either of its OpenCL or Metal tests, with 6269.5 versus 8552 being the only exception — the GTX 770M's OpenCL score of 8552 actually exceeds the RTX 5070 Ti SUPER's Steel Nomad result. This suggests the older card can outperform in compute-oriented OpenCL workloads, while the newer card dominates in modern graphics APIs like DX12.

Architecture Differences

The architectural gap between these two GPUs is stark. The RTX 5070 Ti SUPER uses the GB203 chip built on Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC with 45,600 million transistors on a 378 mm² die. The GTX 770M relies on the GK106 chip with Kepler architecture, using a 28 nm process, 2,540 million transistors, and a 221 mm² die. Transistor density tells the story: the newer card packs 120.6 million transistors per mm², while the older card manages just 11.5 million per mm² — a tenfold increase in density.

Core configurations differ dramatically. The RTX 5070 Ti SUPER features 8960 shading units, 280 texture mapping units (TMUs), and 96 raster output units (ROPs). It also includes 70 ray tracing cores and 280 tensor cores. The GTX 770M has 960 shading units, 80 TMUs, and 24 ROPs, with no ray tracing or tensor cores at all — those technologies did not exist in Kepler. Clock speeds reinforce the gap: the newer card runs at a base of 2295 MHz and boosts to 2452 MHz, while the older card operates at 706 MHz base and 797 MHz boost.

Memory subsystems are equally divergent. The RTX 5070 Ti SUPER offers 16 GB of GDDR7 memory on a 256-bit bus, delivering 896.0 GB/s of bandwidth at 1750 MHz (28 Gbps effective). The GTX 770M provides 3 GB of GDDR5 on a 192-bit bus, with 96.19 GB/s bandwidth at 1002 MHz (4 Gbps effective). The newer card has nearly ten times the memory bandwidth, a critical factor for high-resolution textures and modern game engines. The process node difference — 5 nm versus 28 nm — underpins all these improvements, enabling higher clocks, more cores, and greater efficiency.

Where Each One Wins

The RTX 5070 Ti SUPER wins decisively in raw compute throughput. Its FP32 performance is 43.94 TFLOPS, compared to the GTX 770M's 1.530 TFLOPS — a 28-fold difference. Pixel rate favors the newer card at 235.4 GPixel/s versus 15.94 GPixel/s, and texture rate is 686.6 GTexel/s versus 63.76 GTexel/s. For any modern gaming workload, ray-traced content, or AI-accelerated tasks, the RTX 5070 Ti SUPER is the clear choice, with its 70 RT cores and 280 tensor cores providing capabilities the GTX 770M simply lacks.

The GTX 770M, however, wins in the Geekbench OpenCL test with a score of 8552, which is higher than the RTX 5070 Ti SUPER's 6269.5 Steel Nomad result. This indicates the older card can hold its own in certain compute-oriented OpenCL applications, despite its age. Its 75 W TDP also makes it far more power-efficient in absolute terms, though the RTX 5070 Ti SUPER's 350 W TDP reflects its desktop positioning and vastly higher performance envelope. The GTX 770M's MXM form factor and lack of power connectors make it suitable for portable devices, whereas the RTX 5070 Ti SUPER's dual-slot design and 16-pin connector require a desktop chassis.

For legacy software compatibility, the GTX 770M supports DirectX 12 (11_0) and Vulkan 1.2.175, while the RTX 5070 Ti SUPER supports DirectX 12 Ultimate (12_2) and Vulkan 1.4. Both cards support OpenGL 4.6. The older card's support for older API versions may matter for users running legacy applications, but the newer card's feature set — including hardware ray tracing and tensor acceleration — makes it the better choice for any forward-looking workload.

FAQ

Q: Which card has a higher average benchmark score?

A: The RTX 5070 Ti SUPER has an average benchmark score of 6270, while the GTX 770M averages 6000, a difference of 270 points in favor of the newer card.

Q: Does the GTX 770M outperform the RTX 5070 Ti SUPER in any benchmark?

A: Yes, the GTX 770M scores 8552 in Geekbench OpenCL, which exceeds the RTX 5070 Ti SUPER's 6269.5 in 3DMark Steel Nomad DX12, though these are different tests.

Q: What is the memory capacity difference between the two cards?

A: The RTX 5070 Ti SUPER has 16 GB of GDDR7 memory, while the GTX 770M has 3 GB of GDDR5 memory.

Q: How do the transistor counts compare?

A: The RTX 5070 Ti SUPER contains 45,600 million transistors, while the GTX 770M contains 2,540 million transistors.

Q: Do both cards support ray tracing?

A: No, only the RTX 5070 Ti SUPER has ray tracing cores (70 of them). The GTX 770M has no RT cores, as Kepler architecture predates ray tracing hardware.

Q: Which card has a higher boost clock?

A: The RTX 5070 Ti SUPER boosts to 2452 MHz, while the GTX 770M boosts to 797 MHz.

The Verdict

The data points to a clear winner for modern workloads: the RTX 5070 Ti SUPER. Its 43.94 TFLOPS FP32 performance, 896.0 GB/s memory bandwidth, and support for DirectX 12 Ultimate make it suitable for current and future gaming, content creation, and AI applications. The 36th percentile ranking places it near the RTX 4070 Ti SUPER AD102, indicating strong performance relative to the broader GPU landscape. Users who need ray tracing, tensor cores, or high-bandwidth memory should choose the RTX 5070 Ti SUPER without hesitation.

The GTX 770M, despite being end-of-life, still holds relevance for legacy systems or specific OpenCL compute tasks where its 8552 Geekbench score demonstrates capability. Its 75 W TDP and MXM form factor make it a low-power option for portable devices, and its 35th percentile ranking shows it is not obsolete by aggregate standards. However, its 1.530 TFLOPS FP32 throughput and 96.19 GB/s bandwidth limit it to older games and less demanding applications. For anyone building a new system or upgrading for modern titles, the RTX 5070 Ti SUPER is the only rational choice based on the benchmark data.

Specification Differences

| Specification | NVIDIA GeForce RTX 5070 Ti SUPER | NVIDIA GeForce GTX 770M |

|---|---|---|

| Process Node | 5 nm | 28 nm |

| Transistors | 45,600 million | 2,540 million |

| Die Size | 378 mm² | 221 mm² |

| Transistor Density | 120.6M / mm² | 11.5M / mm² |

| Base Clock | 2295 MHz | 706 MHz |

| Boost Clock | 2452 MHz | 797 MHz |

| Memory Size | 16 GB | 3 GB |

| Memory Type | GDDR7 | GDDR5 |

| Memory Bus Width | 256 bit | 192 bit |

| Memory Bandwidth | 896.0 GB/s | 96.19 GB/s |

| Shading Units | 8960 | 960 |

| TMUs | 280 | 80 |

| ROPs | 96 | 24 |

| RT Cores | 70 | None |

| Tensor Cores | 280 | None |

| Pixel Rate | 235.4 GPixel/s | 15.94 GPixel/s |

| Texture Rate | 686.6 GTexel/s | 63.76 GTexel/s |

| FP32 Performance | 43.94 TFLOPS | 1.530 TFLOPS |

| TDP | 350 W | 75 W |

| Slot Width | Dual-slot | MXM Module |

| Power Connectors | 1x 16-pin | None |

| Bus Interface | PCIe 5.0 x16 | MXM-B (3.0) |

| Display Outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1b | Portable Device Dependent |

| DirectX Support | 12 Ultimate (12_2) | 12 (11_0) |

| Vulkan Support | 1.4 | 1.2.175 |

| Production Status | Active | End-of-life |

| Release Date | 2025-12-31 | 2013-05-29 |

| Launch MSRP | 749 USD | None |

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 770M
RTX 5070 Ti SUPER
Core Specs
Shading Units
960
8,960 +833.3%
Shaders
960
8,960 +833.3%
TMUs
80
280 +250.0%
ROPs
24
96 +300.0%
Clocks
Base Clock
706 MHz
2295 MHz
Boost Clock
797 MHz
2452 MHz
Memory Clock
1002 MHz 4 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
3 GB
16 GB
VRAM (MB)
3,072
16,384 +433.3%
Memory Type
GDDR5
GDDR7
Memory Bus
192 bit
256 bit
Bandwidth
96.19 GB/s
896.0 GB/s
Cache
L1 Cache
16 KB (per SMX)
128 KB (per SM)
L2 Cache
384 KB
48 MB
Performance
Pixel Rate
15.94 GPixel/s
235.4 GPixel/s
Texture Rate
63.76 GTexel/s
686.6 GTexel/s
FP32 (TFLOPS)
1.530 TFLOPS
43.94 TFLOPS
FP64 (TFLOPS)
63.76 GFLOPS (1:24)
686.6 GFLOPS (1:64)
FP16 (TFLOPS)
—
43.94 TFLOPS (1:1)
AI/RT
RT Cores
—
70
Tensor Cores
—
280
Power
TDP
75 W
350 W
TDP (W)
75
350 +366.7%
Power Connectors
None
1x 16-pin
Architecture
Architecture
Kepler
Blackwell 2.0
GPU Name
GK106
GB203
Generation
GeForce 700M
GeForce 50
Process Size
28 nm
5 nm
Transistors
2,540 million
45,600 million
Die Size
221 mm²
378 mm²
Foundry
TSMC
TSMC
Density
11.5M / mm²
120.6M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.175
1.4
OpenCL
3.0
3.0
CUDA
3.0
—
Shader Model
6.5 (5.1)
6.8
Physical
Slot Width
MXM Module
Dual-slot
Length
—
304 mm 12 inches
Height
—
137 mm 5.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b 3x DisplayPort 2.1b
Bus Interface
MXM-B (3.0)
PCIe 5.0 x16
Other
Launch Price
—
749 USD
Production
End-of-life
Active
Predecessor
GeForce 600M
—
Successor
GeForce 800M
—
View GeForce GTX 770M Details View GeForce RTX 5070 Ti SUPER Details