NVIDIA GeForce GTX 560M vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
NVIDIA GeForce GTX 560M
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 560M vs NVIDIA GeForce RTX 5060 Ti 8 GB
The NVIDIA GeForce RTX 5060 Ti 8 GB and the NVIDIA GeForce GTX 560M are separated by over a decade of GPU architecture, yet their aggregate benchmark scores place them surprisingly close together. The RTX 5060 Ti 8 GB posts an average benchmark score of 4901, while the GTX 560M records 4855, a difference of less than one percent. This near-parity in overall averages, however, masks a complete divergence in workload strengths, with the modern card dominating modern API tests while the legacy part clings to older DirectX scenarios. The data shows that the RTX 5060 Ti 8 GB sits at the 29th percentile of all GPUs, while the GTX 560M is at the 28th percentile, making them direct competitors in this database’s ranking system despite their generational gap.
Head-to-Head Benchmarks
The RTX 5060 Ti 8 GB delivers decisive wins in every DirectX benchmark where both cards have data. In PassMark’s DirectX 11 test, the RTX 5060 Ti 8 GB scores 220, while the GTX 560M has no recorded score in that test. For DirectX 10, the RTX 5060 Ti 8 GB posts 142, again with no comparable GTX 560M result. The pattern holds for DirectX 9, where the RTX 5060 Ti 8 GB scores 228, and for DirectX 12, where it records 82. The GTX 560M’s only benchmark entry is Geekbench OpenCL, where it scores 4855, a figure that places it within 0.9% of the RTX 5060 Ti 8 GB’s average of 4901. In the database’s head-to-head comparison, the RTX 5060 Ti 8 GB wins zero direct tests, and the GTX 560M wins zero direct tests, because no shared benchmark workload exists between them. The RTX 5060 Ti 8 GB’s nearest rival, the AMD FirePro W5130M, scores 4904, a 0.1% difference, while the GTX 560M’s nearest rival, the NVIDIA GeForce 940MX, scores 4844, a 0.2% difference. The two cards themselves appear in each other’s nearest rival lists: the RTX 5060 Ti 8 GB is 0.9% ahead of the GTX 560M, and the GTX 560M is 0.9% behind the RTX 5060 Ti 8 GB, confirming that the aggregate scores are effectively tied.
Architecture Differences
The architectural gulf is immense. The RTX 5060 Ti 8 GB uses the GB206 chip built on TSMC’s 5 nm process, packing 21,900 million transistors into a 181 mm² die for a density of 121.0 million transistors per mm². The GTX 560M uses the GF116 chip on TSMC’s 40 nm process, with 1,170 million transistors on a 238 mm² die, yielding a density of just 4.9 million transistors per mm². That is a 24.6-fold difference in transistor density. The RTX 5060 Ti 8 GB is built on the Blackwell 2.0 architecture from the GeForce 50 generation, while the GTX 560M uses the Fermi 2.0 architecture from the GeForce 500M generation. The RTX 5060 Ti 8 GB features 4608 shading units, 144 texture mapping units, and 48 raster output units, whereas the GTX 560M has 192 shading units, 32 TMUs, and 24 ROPs. The RTX 5060 Ti 8 GB also includes 36 ray tracing cores and 144 tensor cores; the GTX 560M has none. Clock speeds differ drastically: the RTX 5060 Ti 8 GB runs at a base of 2407 MHz and boosts to 2572 MHz, while the GTX 560M has no listed base or boost clocks. Memory configurations are equally divergent: the RTX 5060 Ti 8 GB uses 8 GB of GDDR7 on a 128-bit bus for 448.0 GB/s of bandwidth, while the GTX 560M uses 1536 MB of GDDR5 on a 192-bit bus for 60.00 GB/s. The pixel rate of the RTX 5060 Ti 8 GB is 123.5 GPixel/s versus 6.200 GPixel/s for the GTX 560M, and texture rates are 370.4 GTexel/s versus 24.80 GTexel/s. FP32 compute is 23.70 TFLOPS against 595.2 GFLOPS. The RTX 5060 Ti 8 GB supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4; the GTX 560M supports DirectX 12 (11_0) and OpenGL 4.6, with no Vulkan support. The RTX 5060 Ti 8 GB uses a PCIe 5.0 x8 interface, while the GTX 560M uses MXM-B (3.0).
Where Each One Wins
The RTX 5060 Ti 8 GB wins in every scenario that exercises modern graphics APIs. Its DirectX 12 score of 82, while low in absolute terms, is the only DirectX 12 result available between the two, and its DirectX 11 score of 220 similarly stands alone. The GTX 560M’s sole victory is in the Geekbench OpenCL compute benchmark, where it scores 4855; the RTX 5060 Ti 8 GB has no Geekbench score to compare. For workloads that rely on raw compute throughput, the RTX 5060 Ti 8 GB’s 23.70 TFLOPS FP32 performance dwarfs the GTX 560M’s 595.2 GFLOPS, a 39.8-fold advantage. Memory bandwidth favors the RTX 5060 Ti 8 GB at 448.0 GB/s versus 60.00 GB/s, a 7.5-fold lead. In terms of API compatibility, the RTX 5060 Ti 8 GB’s Vulkan 1.4 and DirectX 12 Ultimate support open workloads the GTX 560M cannot run at all. The GTX 560M’s 192-bit memory bus, however, gives it a wider bus width than the RTX 5060 Ti 8 GB’s 128-bit bus, though this does not translate into a bandwidth advantage. The GTX 560M also draws far less power, with a 75 W TDP versus 180 W, and uses no power connectors, while the RTX 5060 Ti 8 GB requires a single 8-pin connector and a 450 W suggested PSU. For legacy applications built around DirectX 9 or early DirectX 10, the GTX 560M’s architecture from 2011 may have more mature driver paths, but the benchmark data shows no shared test to quantify this.
The Verdict
From the data, the RTX 5060 Ti 8 GB is the clear choice for any user running modern workloads. Its DirectX 11 and DirectX 12 scores, while not directly comparable to the GTX 560M’s OpenCL result, indicate it can execute current graphics APIs that the GTX 560M cannot. The 39.8-fold FP32 compute advantage and 7.5-fold memory bandwidth advantage make it categorically faster for compute-heavy tasks. The GTX 560M, however, remains relevant only for the narrow case of a system that must use an MXM module with no external power connector and a 75 W power budget. Its 4855 Geekbench OpenCL score sits within 0.9% of the RTX 5060 Ti 8 GB’s average, so in that single test it is competitive. But the RTX 5060 Ti 8 GB’s percentile ranking of 29 versus the GTX 560M’s 28, combined with the modern feature set, means the RTX 5060 Ti 8 GB is the superior part for any GPU workload that postdates 2011. The RTX 5060 Ti 8 GB is an active product with a launch MSRP of 379 USD, while the GTX 560M is end-of-life. Anyone building a new system should pick the RTX 5060 Ti 8 GB; anyone maintaining a legacy laptop with an MXM slot and a 75 W limit may find the GTX 560M the only option, but the data offers no reason to choose it over the modern card if power and slot constraints allow.
FAQ
Q: Which card has a higher average benchmark score?
A: The NVIDIA GeForce RTX 5060 Ti 8 GB has an average benchmark score of 4901, while the NVIDIA GeForce GTX 560M has 4855, making the RTX 5060 Ti 8 GB 0.9% faster in aggregate.
Q: Do the two cards share any benchmark results?
A: No. The RTX 5060 Ti 8 GB has results for 3DMark Steel Nomad DX12, PassMark DirectX 10, 11, 12, 9, G2D, G3D, and GPU Compute, while the GTX 560M only has a Geekbench OpenCL score of 4855. There is no overlapping test.
Q: What is the memory configuration difference?
A: The RTX 5060 Ti 8 GB has 8 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. The GTX 560M has 1536 MB of GDDR5 on a 192-bit bus with 60.00 GB/s bandwidth.
Q: Which card supports ray tracing?
A: Only the RTX 5060 Ti 8 GB, which includes 36 ray tracing cores. The GTX 560M has no ray tracing cores or tensor cores.
Q: What are the power requirements?
A: The RTX 5060 Ti 8 GB has a 180 W TDP, requires a single 8-pin power connector, and a suggested 450 W PSU. The GTX 560M has a 75 W TDP, uses no power connectors, and is an MXM module.
Q: How do their process nodes compare?
A: The RTX 5060 Ti 8 GB is built on a 5 nm process at TSMC, while the GTX 560M is on a 40 nm process at TSMC. Transistor density is 121.0 million per mm² versus 4.9 million per mm².
Specification Differences
| Specification | NVIDIA GeForce RTX 5060 Ti 8 GB | NVIDIA GeForce GTX 560M |
|---|---|---|
| Architecture | Blackwell 2.0 | Fermi 2.0 |
| Process Node | 5 nm | 40 nm |
| Transistors | 21,900 million | 1,170 million |
| Die Size | 181 mm² | 238 mm² |
| Transistor Density | 121.0M / mm² | 4.9M / mm² |
| Base Clock | 2407 MHz | None |
| Boost Clock | 2572 MHz | None |
| Memory Size | 8 GB | 1536 MB |
| Memory Type | GDDR7 | GDDR5 |
| Memory Bus Width | 128 bit | 192 bit |
| Memory Bandwidth | 448.0 GB/s | 60.00 GB/s |
| Shading Units | 4608 | 192 |
| TMUs | 144 | 32 |
| ROPs | 48 | 24 |
| RT Cores | 36 | None |
| Tensor Cores | 144 | None |
| Pixel Rate | 123.5 GPixel/s | 6.200 GPixel/s |
| Texture Rate | 370.4 GTexel/s | 24.80 GTexel/s |
| FP32 | 23.70 TFLOPS | 595.2 GFLOPS |
| TDP | 180 W | 75 W |
| Slot Width | Dual-slot | MXM Module |
| Power Connectors | 1x 8-pin | None |
| Suggested PSU | 450 W | None |
| Bus Interface | PCIe 5.0 x8 | MXM-B (3.0) |
| Display Outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1b | Portable Device Dependent |
| DirectX | 12 Ultimate (12_2) | 12 (11_0) |
| Vulkan | 1.4 | None |
| Production Status | Active | End-of-life |