NVIDIA GeForce GTX 460M vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 460M

CORE STATE GF106
VRAM 1536 MB
CLOCK SPEED —
TDP 50 W
BUS WIDTH 192 bit
ARCHITECTURE Fermi
nm
PROCESS 40 nm
LAUNCH DATE 2010
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 16 GB

CORE STATE GB206
VRAM 16 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
4,282
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,019
passmark_directx_10
N/A
144
passmark_directx_11
N/A
219
passmark_directx_12
N/A
89
passmark_directx_9
N/A
238
passmark_g2d
N/A
1,206
passmark_g3d
N/A
22,618
passmark_gpu_compute
N/A
11,224

Analysis: NVIDIA GeForce GTX 460M vs NVIDIA GeForce RTX 5060 Ti 16 GB

FAQ

Q: How do the two cards compare in overall benchmark scores?

A: The RTX 5060 Ti 16 GB has an average benchmark score of 4970, while the GTX 460M has an average score of 4282. The RTX 5060 Ti sits in the 29th percentile of all GPUs, while the GTX 460M sits in the 25th percentile.

Q: What is the closest rival to the RTX 5060 Ti 16 GB?

A: The nearest rival in the database is the NVIDIA Quadro 4000, which has an average score of 4979, a delta of -0.2% relative to the RTX 5060 Ti. The AMD Radeon R7 Graphics and AMD Radeon R7 M360 are also close, with deltas of -0.6% and +0.8% respectively.

Q: What is the closest rival to the GTX 460M?

A: The closest rival is the AMD FirePro W2100, with an average score of 4295 and a delta of -0.3%. The AMD Radeon Vega 3 is nearly identical at 4268, a +0.3% delta.

Q: What memory configurations do these cards use?

A: The RTX 5060 Ti 16 GB has 16 GB of GDDR7 memory on a 128-bit bus with 448.0 GB/s bandwidth. The GTX 460M has 1536 MB of GDDR5 memory on a 192-bit bus with 60.00 GB/s bandwidth.

Q: What is the production status of each card?

A: The RTX 5060 Ti 16 GB is listed as Active, while the GTX 460M is End-of-life. The RTX 5060 Ti was released on 2025-04-15, and the GTX 460M was released on 2010-09-02.

Q: Which APIs are supported by each card?

A: The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The GTX 460M supports DirectX 12 (11_0) and OpenGL 4.6, with no Vulkan support listed.

The Verdict

The data is unambiguous. The RTX 5060 Ti 16 GB is the card to pick for anyone running modern workloads. Its average benchmark score of 4970 is 16.07% higher than the GTX 460M's 4282. The RTX 5060 Ti also holds a higher percentile rank, 29th versus 25th, across all GPUs in the database.

The GTX 460M is a legacy mobile part. It belongs to the GeForce 400M generation, uses the Fermi architecture, and is end-of-life. Its only recorded benchmark is a Geekbench OpenCL score of 4282, which places it just below the RTX 5060 Ti's average. For any current gaming, content creation, or compute task, the RTX 5060 Ti is the only sensible choice. The GTX 460M should only be considered for vintage systems or compatibility with older software environments that require a Fermi-era GPU.

The RTX 5060 Ti is active in production, features a modern 5 nm process, and supports current APIs including Vulkan 1.4 and DirectX 12 Ultimate. The GTX 460M lacks Vulkan support and only reaches DirectX 12 (11_0). If the choice is between these two, the RTX 5060 Ti wins on every measurable axis.

Head-to-Head Benchmarks

The database shows no overlapping benchmark tests between the two cards. The RTX 5060 Ti reports scores across 3DMark Steel Nomad, PassMark DirectX 10, 11, 12, 9, G2D, G3D, and GPU Compute. The GTX 460M reports only a Geekbench OpenCL score.

The RTX 5060 Ti's PassMark G3D score is 22618. Its PassMark GPU Compute score is 11224. Its 3DMark Steel Nomad DX12 score is 4019. These results show a card capable of sustained modern rendering and compute workloads.

The GTX 460M's Geekbench OpenCL score of 4282 is the only direct performance data point. This score falls below the RTX 5060 Ti's average benchmark score of 4970, meaning the newer card outperforms the older one even when comparing the RTX 5060 Ti's mean across all tests against the GTX 460M's single best recorded result.

The closest rival comparisons reinforce the positioning. The RTX 5060 Ti is bracketed by the Quadro 4000 at 4979 (-0.2%) and the Radeon R7 Graphics at 4998 (-0.6%). The GTX 460M is bracketed by the FirePro W2100 at 4295 (-0.3%) and the Radeon Vega 3 at 4268 (+0.3%). The performance gap between the two cards is roughly equivalent to the gap between two entirely different tiers of hardware in the database.

Specification Differences

The memory subsystems are radically different. The RTX 5060 Ti has 16 GB of GDDR7 on a 128-bit bus delivering 448.0 GB/s. The GTX 460M has 1536 MB of GDDR5 on a 192-bit bus delivering 60.00 GB/s. The newer card has nearly 10 times the bandwidth and over 10 times the capacity.

The compute resources are also far apart. The RTX 5060 Ti has 4608 shading units, 144 TMUs, and 48 ROPs. The GTX 460M has 192 shading units, 32 TMUs, and 24 ROPs. The RTX 5060 Ti also includes 36 ray tracing cores and 144 tensor cores; the GTX 460M has none of either.

Clock behavior differs. The RTX 5060 Ti has a base clock of 2407 MHz and a boost clock of 2572 MHz, with memory at 1750 MHz (28 Gbps effective). The GTX 460M has no base or boost clock listed; its memory runs at 625 MHz (2.5 Gbps effective).

The process technology is generations apart. The RTX 5060 Ti uses a 5 nm process at TSMC with 21,900 million transistors on a 181 mm² die, for a density of 121.0M per mm². The GTX 460M uses a 40 nm process at TSMC with 1,170 million transistors on a 238 mm² die, for a density of 4.9M per mm².

Power and physical specifications differ substantially. The RTX 5060 Ti has a TDP of 180 W, is dual-slot, uses one 8-pin power connector, and requires a 450 W suggested PSU. The GTX 460M has a TDP of 50 W, is an MXM module, and uses no power connectors.

Interface and outputs also differ. The RTX 5060 Ti uses PCIe 5.0 x8 and has 1x HDMI 2.1b and 3x DisplayPort 2.1b outputs. The GTX 460M uses PCIe 2.0 x16 and has portable-device-dependent outputs.

Architecture Differences

The RTX 5060 Ti is built on the Blackwell 2.0 architecture, using the GB206 chip. The GTX 460M uses the Fermi architecture with the GF106 chip. These are two completely different design philosophies separated by two decades of GPU evolution.

The RTX 5060 Ti includes dedicated ray tracing cores and tensor cores, enabling hardware-accelerated ray tracing and AI workloads. The GTX 460M has neither. The newer card also supports DirectX 12 Ultimate and Vulkan 1.4, while the older card is limited to DirectX 12 (11_0) with no Vulkan support.

The transistor density tells the story of architectural advancement. The RTX 5060 Ti packs 121.0M transistors per mm², while the GTX 460M manages just 4.9M per mm². This density difference enables the RTX 5060 Ti to deliver 23.70 TFLOPS of FP32 performance, compared to the GTX 460M's 518.4 GFLOPS.

Pixel and texture rates follow the same pattern. The RTX 5060 Ti achieves 123.5 GPixel/s and 370.4 GTexel/s. The GTX 460M achieves 5.400 GPixel/s and 21.60 GTexel/s. The newer card is roughly 23 times faster in pixel throughput and 17 times faster in texture throughput.

The RTX 5060 Ti also supports FP16 at a 1:1 ratio with FP32, at 23.70 TFLOPS, while the GTX 460M lists no FP16 capability. This makes the RTX 5060 Ti far more versatile for mixed-precision compute tasks.

Where Each One Wins

The RTX 5060 Ti wins in every category where data exists. Its average benchmark score of 4970 exceeds the GTX 460M's 4282 by a significant margin. It ranks higher in the overall GPU percentile distribution, 29th versus 25th.

For modern gaming, the RTX 5060 Ti is the clear choice. It supports DirectX 12 Ultimate, which enables features like ray tracing via its 36 RT cores and AI acceleration through its 144 tensor cores. The GTX 460M cannot run these workloads at all.

For compute tasks, the RTX 5060 Ti's 23.70 TFLOPS FP32 and FP16 performance, combined with 11224 PassMark GPU Compute score, makes it viable for serious workloads. The GTX 460M's 518.4 GFLOPS FP32 is a fraction of that capability.

For display connectivity, the RTX 5060 Ti offers HDMI 2.1b and three DisplayPort 2.1b outputs, supporting modern high-resolution and high-refresh-rate monitors. The GTX 460M relies on portable device dependent outputs, which limits its usefulness to laptop panels.

The GTX 460M does have one advantage: power consumption. At 50 W TDP with no external power connectors, it draws far less power than the RTX 5060 Ti's 180 W TDP with a single 8-pin connector. This makes the GTX 460M suitable for older mobile platforms with limited power delivery.

The GTX 460M also supports PCIe 2.0 x16, which may be compatible with very old motherboards that lack PCIe 5.0 support. However, the RTX 5060 Ti's PCIe 5.0 x8 interface is backward compatible and offers substantially more bandwidth.

The GTX 460M's only recorded benchmark, a Geekbench OpenCL score of 4282, is its sole data point. In the database, its nearest rival is the RTX 4070 GDDR6 at 4335, a -1.2% delta. This places the GTX 460M near modern low-end and mid-range parts in OpenCL compute, but its lack of modern API support and tiny memory capacity limit its practical use.

The RTX 5060 Ti, in contrast, has a broad benchmark profile across DirectX 9, 10, 11, 12, G2D, G3D, and compute workloads. Its 22618 PassMark G3D score and 4019 3DMark Steel Nomad score demonstrate consistent strength across legacy and modern rendering paths.

For any user building a new system or upgrading from a Fermi-era laptop, the RTX 5060 Ti is the only rational pick. The GTX 460M is a historical artifact, end-of-life, with no path forward for modern software. The data shows a decisive and complete victory for the RTX 5060 Ti 16 GB.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 460M
RTX 5060 Ti 16 GB
Core Specs
Shading Units
192
4,608 +2300.0%
Shaders
192
4,608 +2300.0%
TMUs
32
144 +350.0%
ROPs
24
48 +100.0%
SM Count
4
36 +800.0%
Clocks
Base Clock
—
2407 MHz
Boost Clock
—
2572 MHz
GPU Clock
675 MHz
—
Shader Clock
1350 MHz
—
Memory Clock
625 MHz 2.5 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
1536 MB
16 GB
VRAM (MB)
1,536
16,384 +966.7%
Memory Type
GDDR5
GDDR7
Memory Bus
192 bit
128 bit
Bandwidth
60.00 GB/s
448.0 GB/s
Cache
L1 Cache
64 KB (per SM)
128 KB (per SM)
L2 Cache
384 KB
32 MB
Performance
Pixel Rate
5.400 GPixel/s
123.5 GPixel/s
Texture Rate
21.60 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
518.4 GFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
43.20 GFLOPS (1:12)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
—
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
—
144
Power
TDP
50 W
180 W
TDP (W)
50
180 +260.0%
Suggested PSU
—
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
Fermi
Blackwell 2.0
GPU Name
GF106
GB206
Generation
GeForce 400M
GeForce 50
Process Size
40 nm
5 nm
Transistors
1,170 million
21,900 million
Die Size
238 mm²
181 mm²
Foundry
TSMC
TSMC
Density
4.9M / mm²
121.0M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
—
1.4
OpenCL
1.1
3.0
CUDA
2.1
12.0
Shader Model
5.1
6.9
Physical
Slot Width
MXM Module
Dual-slot
Length
—
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
Portable Device Dependent
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 2.0 x16
PCIe 5.0 x8
Other
Launch Price
—
429 USD
Production
End-of-life
Active
Predecessor
GeForce 300M
GeForce 40
Successor
GeForce 500M
GeForce 60
View GeForce GTX 460M Details View GeForce RTX 5060 Ti 16 GB Details