NVIDIA GeForce GTX 460 v2 vs NVIDIA GeForce RTX 3050 A Mobile Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 460 v2

CORE STATE GF114
VRAM 1024 MB
CLOCK SPEED —
TDP 160 W
BUS WIDTH 192 bit
ARCHITECTURE Fermi 2.0
nm
PROCESS 40 nm
LAUNCH DATE 2011
VS
NVIDIA
GEFORCE

GeForce RTX 3050 A Mobile

CORE STATE GA106
VRAM 4 GB
CLOCK SPEED 1343 MHz
TDP 45 W
BUS WIDTH 128 bit
ARCHITECTURE Ampere
nm
PROCESS 8 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
8,743
52,998
passmark_directx_10
N/A
61
passmark_directx_11
N/A
94
passmark_directx_12
N/A
55
passmark_directx_9
N/A
152
passmark_g2d
N/A
526
passmark_g3d
N/A
11,664
passmark_gpu_compute
N/A
4,419

Analysis: NVIDIA GeForce GTX 460 v2 vs NVIDIA GeForce RTX 3050 A Mobile

The benchmark data places the NVIDIA GeForce RTX 3050 A Mobile and the NVIDIA GeForce GTX 460 v2 in a statistical dead heat on average score, with the mobile Ampere part edging ahead by a negligible 0.03% (8746 vs 8743). However, this near-identical aggregate hides a fundamental generation gap: the RTX 3050 A Mobile wins the only directly comparable head-to-head test by a massive margin, while the GTX 460 v2 relies on a single legacy score to stay competitive. The story is not about which card is faster overall—it is about how each achieves its standing through completely different architectural eras and benchmark methodologies.

Where Each One Wins

The RTX 3050 A Mobile is the clear winner in modern compute workloads, as demonstrated by its Geekbench OpenCL score of 52998, which is 506.2% higher than the GTX 460 v2's 8743 in the same test. This is not a marginal victory; it is a generational leap that reflects the Ampere architecture's ability to handle contemporary parallel compute tasks. The data shows the RTX 3050 A Mobile also dominates in DirectX 12 and DirectX 11 scenarios from Passmark, scoring 55 and 94 respectively, alongside a strong DirectX 10 score of 61 and a DirectX 9 score of 152. Its Passmark G3D score of 11664 and GPU compute score of 4419 further cement its position as the superior choice for any workload that leverages modern APIs or general-purpose GPU computing.

The GTX 460 v2's only claim to victory is in the absence of head-to-head data, as it wins zero of the recorded comparisons. Its single Geekbench OpenCL score of 8743 is what anchors its average, but this is the same score that the RTX 3050 A Mobile surpasses by over 500%. The GTX 460 v2 does not win in any benchmark category where both cards have results. Its relevance in the comparison comes solely from its historical standing as a desktop part with a 160 W TDP and a dual-slot design, which are specifications, not performance wins. In practical terms, the RTX 3050 A Mobile wins every measurable performance contest, while the GTX 460 v2 only competes on the basis of its average score being within 0.03% of its rival.

FAQ

Q: How much faster is the RTX 3050 A Mobile in OpenCL compute?

A: The RTX 3050 A Mobile scores 52998 in Geekbench OpenCL, which is 506.2% higher than the GTX 460 v2's 8743. This represents a six-fold improvement in raw compute performance.

Q: Are these two GPUs comparable in overall average performance?

A: Yes, their average benchmark scores are nearly identical: the RTX 3050 A Mobile averages 8746, while the GTX 460 v2 averages 8743, a delta of just 0.03%. However, this average is misleading because the mobile card has many more benchmark results that pull its average down, while the desktop card has only one score.

Q: Which card supports ray tracing and tensor cores?

A: Only the RTX 3050 A Mobile has dedicated hardware, featuring 14 RT cores and 56 tensor cores. The GTX 460 v2 has no such units, as it predates these technologies.

Q: What is the memory configuration difference?

A: The RTX 3050 A Mobile has 4 GB of GDDR6 memory on a 128-bit bus, yielding 192.0 GB/s bandwidth. The GTX 460 v2 has 1024 MB of GDDR5 on a 192-bit bus, yielding 96.19 GB/s bandwidth.

Q: How do their power requirements differ?

A: The RTX 3050 A Mobile has a 45 W TDP and requires no power connectors, while the GTX 460 v2 has a 160 W TDP and requires two 6-pin connectors with a suggested 450 W PSU.

Q: Which card has a higher pixel fill rate?

A: The RTX 3050 A Mobile achieves 42.98 GPixel/s, which is nearly four times the GTX 460 v2's 10.91 GPixel/s.

Head-to-Head Benchmarks

The only direct comparison available is the Geekbench OpenCL test, and it is a rout. The RTX 3050 A Mobile scores 52998, while the GTX 460 v2 scores 8743, giving the mobile card a 506.2% advantage. This single result defines the head-to-head matchup, as there are no other shared benchmarks in the data. The magnitude of this win is unprecedented in typical GPU comparisons; it indicates that the RTX 3050 A Mobile is not just faster but operates in a different performance class for compute tasks.

Looking at the broader benchmark suite, the RTX 3050 A Mobile's Passmark scores provide additional context. Its G3D score of 11664 is substantial, and its DirectX 11 score of 94 is nearly double its DirectX 12 score of 55, suggesting strong legacy API performance. The GTX 460 v2 has no Passmark results in the data, so its performance in these tests cannot be compared directly. The only way the GTX 460 v2 stays competitive is through its average score being calculated from a single Geekbench result, which is exactly the test where it loses most badly. This creates a paradox: the desktop card's only data point is its worst matchup, yet that single score still places it in the same percentile (44th) as its rival, highlighting how the RTX 3050 A Mobile's average is dragged down by its lower DirectX scores.

Specification Differences

The two GPUs diverge sharply on nearly every hardware specification. The RTX 3050 A Mobile uses 1792 shading units, 56 TMUs, and 32 ROPs, whereas the GTX 460 v2 has 336 shading units, 56 TMUs, and 24 ROPs. The mobile card's shading unit count is over five times higher, while TMU counts are identical. The RTX 3050 A Mobile also features 14 RT cores and 56 tensor cores, which the GTX 460 v2 completely lacks.

Memory is another major differentiator. The RTX 3050 A Mobile offers 4 GB of GDDR6 at 12 Gbps effective, with a 128-bit bus and 192.0 GB/s bandwidth. The GTX 460 v2 uses 1024 MB of GDDR5 at 4 Gbps effective, with a 192-bit bus and 96.19 GB/s bandwidth. Despite the mobile card's narrower bus, its faster memory type and higher clock speed give it double the bandwidth.

Clock speeds and power draw also tell the story. The RTX 3050 A Mobile runs at a base of 1065 MHz and boost of 1343 MHz, while the GTX 460 v2 has no listed base or boost clocks. The mobile card's TDP is 45 W, compared to 160 W for the desktop part. The GTX 460 v2 requires a dual-slot cooler, two 6-pin power connectors, and a suggested 450 W PSU, while the RTX 3050 A Mobile is an IGP with no power connectors and a single-slot footprint. The bus interface differs as well: PCIe 4.0 x8 for the mobile card versus PCIe 2.0 x16 for the desktop part.

Architecture Differences

The RTX 3050 A Mobile is built on the Ampere architecture using the GA106 chip, fabricated on Samsung's 8 nm process. It packs 12,000 million transistors into a 276 mm² die, achieving a transistor density of 43.5M per mm². The GTX 460 v2 uses the Fermi 2.0 architecture with the GF114 chip, fabricated on TSMC's 40 nm process. It contains 1,950 million transistors on a larger 332 mm² die, resulting in a much lower density of 5.9M per mm².

The architectural generational gap is stark. Ampere supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while Fermi 2.0 is limited to DirectX 12 (11_0) and has no Vulkan support. The RTX 3050 A Mobile's FP32 performance is 4.813 TFLOPS, compared to the GTX 460 v2's 1,046.3 GFLOPS (about 1.05 TFLOPS). The mobile card also has FP16 performance of 4.813 TFLOPS with a 1:1 ratio, while the GTX 460 v2 has no listed FP16 capability. The pixel rate is 42.98 GPixel/s versus 10.91 GPixel/s, and the texture rate is 75.21 GTexel/s versus 43.62 GTexel/s.

The RTX 3050 A Mobile belongs to the GeForce 30 Mobile generation with a release date at the end of 2023, while the GTX 460 v2 is from the GeForce 400 generation, released in September 2011. The mobile card's predecessor is the GeForce 20 Mobile, while the desktop card's predecessor is the GeForce 200 and its successor is the GeForce 500. The GTX 460 v2 has a launch MSRP of 199 USD, while the RTX 3050 A Mobile has no listed launch MSRP.

The Verdict

The data overwhelmingly favors the RTX 3050 A Mobile for any user who prioritizes performance. It wins the only direct benchmark by 506.2%, offers 4x the memory capacity, 5.3x the shading units, and 2x the memory bandwidth. Its 45 W TDP makes it dramatically more power-efficient than the 160 W GTX 460 v2, and its modern API support (DirectX 12 Ultimate, Vulkan 1.4) ensures compatibility with current software. The RTX 3050 A Mobile is the clear pick for gaming, compute, and any workload that uses modern graphics APIs.

The GTX 460 v2 should only be considered by someone with a specific need for a legacy desktop card with a 192-bit memory bus and dual-slot cooling. Its identical average score of 8743 versus 8746 is a statistical artifact of having only one benchmark result, not evidence of real-world parity. The desktop card's 1024 MB of memory and 96.19 GB/s bandwidth are insufficient for modern games, and its lack of DirectX 12 Ultimate support limits its future-proofing. The data says the RTX 3050 A Mobile is the superior product in every measurable performance category, while the GTX 460 v2 remains a historical footnote with no competitive advantages outside of its form factor and legacy connectivity options.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 460 v2
RTX 3050 A Mobile
Core Specs
Shading Units
336
1,792 +433.3%
Shaders
336
1,792 +433.3%
TMUs
56
56 0.0%
ROPs
24
32 +33.3%
SM Count
7
14 +100.0%
Clocks
Base Clock
—
1065 MHz
Boost Clock
—
1343 MHz
GPU Clock
779 MHz
—
Shader Clock
1557 MHz
—
Memory Clock
1002 MHz 4 Gbps effective
1500 MHz 12 Gbps effective
Memory
Memory Size
1024 MB
4 GB
VRAM (MB)
1,024
4,096 +300.0%
Memory Type
GDDR5
GDDR6
Memory Bus
192 bit
128 bit
Bandwidth
96.19 GB/s
192.0 GB/s
Cache
L1 Cache
64 KB (per SM)
128 KB (per SM)
L2 Cache
384 KB
2 MB
Performance
Pixel Rate
10.91 GPixel/s
42.98 GPixel/s
Texture Rate
43.62 GTexel/s
75.21 GTexel/s
FP32 (TFLOPS)
1,046.3 GFLOPS
4.813 TFLOPS
FP64 (TFLOPS)
87.19 GFLOPS (1:12)
75.21 GFLOPS (1:64)
FP16 (TFLOPS)
—
4.813 TFLOPS (1:1)
AI/RT
RT Cores
—
14
Tensor Cores
—
56
Power
TDP
160 W
45 W
TDP (W)
160
45 -71.9%
Suggested PSU
450 W
—
Power Connectors
2x 6-pin
None
Architecture
Architecture
Fermi 2.0
Ampere
GPU Name
GF114
GA106
Generation
GeForce 400
GeForce 30 Mobile
Process Size
40 nm
8 nm
Transistors
1,950 million
12,000 million
Die Size
332 mm²
276 mm²
Foundry
TSMC
Samsung
Density
5.9M / mm²
43.5M / mm²
API Support
DirectX
12 (11_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
—
1.4
OpenCL
1.1
3.0
CUDA
2.1
8.6
Shader Model
5.1
6.9
Physical
Slot Width
Dual-slot
IGP
Length
210 mm 8.3 inches
—
Outputs
2x DVI1x mini-HDMI 1.3a
Portable Device Dependent
Bus Interface
PCIe 2.0 x16
PCIe 4.0 x8
Other
Launch Price
199 USD
—
Production
End-of-life
End-of-life
Predecessor
GeForce 200
GeForce 20 Mobile
Successor
GeForce 500
—
View GeForce GTX 460 v2 Details View GeForce RTX 3050 A Mobile Details