NVIDIA GeForce GTX 460 v2 vs NVIDIA GeForce GTX 850M Comparison
NVIDIA GeForce GTX 460 v2
GeForce GTX 850M
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 460 v2 vs NVIDIA GeForce GTX 850M
# NVIDIA GeForce GTX 850M vs NVIDIA GeForce GTX 460 v2
The NVIDIA GeForce GTX 850M and NVIDIA GeForce GTX 460 v2 represent two very different approaches to graphics hardware from the same company, separated by roughly three and a half years of architecture evolution. The 850M is a mobile-first Maxwell part built for efficiency, while the GTX 460 v2 is a desktop Fermi 2.0 card designed for raw throughput at higher power. Benchmark data shows the 850M holds a 12.3% lead in the only head-to-head test available, but the full picture involves trade-offs in memory bandwidth, feature support, and thermal characteristics that matter differently depending on your use case.
FAQ
Q: Which GPU wins in the Geekbench OpenCL benchmark?
A: The GTX 850M scores 9821 compared to the GTX 460 v2's 8743, giving the 850M a 12.3% advantage in this compute-oriented test.
Q: How does each card compare to its nearest rivals?
A: The 850M sits at the 46th percentile of all GPUs with an average benchmark score of 9302, trading blows with the GTX 465 (9294, +0.1%), Radeon R7 M380 (9313, -0.1%), GTX 960 (9273, +0.3%), and Radeon Vega 8 (9221, +0.9%). The GTX 460 v2 is at the 44th percentile with an average score of 8743, closely matching the RTX 3050 A Mobile (8746, 0% delta), while trailing the Quadro P2200 (8686, +0.7%) and Radeon R9 M265X (8851, -1.2%).
Q: What are the memory configuration differences?
A: The 850M uses 2 GB of DDR3 on a 128-bit bus delivering 32.03 GB/s bandwidth, while the GTX 460 v2 uses 1024 MB of GDDR5 on a 192-bit bus delivering 96.19 GB/s — roughly three times the bandwidth despite half the capacity.
Q: How do the power requirements compare?
A: The 850M is rated at 45 W TDP with no power connectors and an IGP slot width, whereas the GTX 460 v2 draws 160 W, requires dual 6-pin power connectors, a 450 W suggested PSU, and occupies a dual-slot form factor.
Q: Does the GTX 460 v2 support Vulkan?
A: No. The GTX 460 v2 lists DirectX 12 (11_0) and OpenGL 4.6 but has no Vulkan support in its API table, while the 850M supports DirectX 12 (11_0), OpenGL 4.6, and Vulkan 1.4.
Q: When were these cards released and what came before/after each?
A: The 850M launched on March 11, 2014, succeeding the GeForce 700M and preceding the GeForce 900M. The GTX 460 v2 launched on September 23, 2011, succeeding the GeForce 200 and preceding the GeForce 500.
Architecture Differences
The architectural gap between these two NVIDIA parts is substantial. The GTX 850M uses the GM107 chip built on Maxwell architecture at TSMC's 28 nm process, packing 1,870 million transistors into a 148 mm² die for a transistor density of 12.6 million per square millimeter. The GTX 460 v2 uses the GF114 chip on the older Fermi 2.0 architecture, fabricated at 40 nm with 1,950 million transistors on a much larger 332 mm² die, yielding just 5.9 million transistors per square millimeter.
The compute layout differs dramatically. The 850M has 640 shading units, 40 texture mapping units, and 16 ROPs. The GTX 460 v2 offers only 336 shading units but compensates with 56 TMUs and 24 ROPs. This translates to peak rates of 14.43 GPixel/s pixel throughput and 36.08 GTexel/s texture fill for the 850M, versus 10.91 GPixel/s and 43.62 GTexel/s for the GTX 460 v2. The 850M wins on pixel rate by roughly 32%, while the GTX 460 v2 takes texture rate by about 21%.
FP32 compute favors the 850M at 1,154.6 GFLOPS compared to the GTX 460 v2's 1,046.3 GFLOPS — about a 10% advantage. Memory architecture is where the GTX 460 v2 fights back: GDDR5 at 4 Gbps effective on a 192-bit bus delivers 96.19 GB/s, versus the 850M's DDR3 at 2 Gbps effective on 128-bit for only 32.03 GB/s. That is a 200% bandwidth advantage for the older card.
The 850M uses PCIe 3.0 x16 while the GTX 460 v2 uses PCIe 2.0 x16. Display outputs on the 850M are portable-device dependent, whereas the GTX 460 v2 offers 2x DVI and 1x mini-HDMI 1.3a. The GTX 460 v2 is 210 mm (8.3 inches) long. Both are end-of-life products.
Head-to-Head Benchmarks
Only one direct benchmark comparison exists in the data: Geekbench OpenCL. The GTX 850M scores 9821 against the GTX 460 v2's 8743, a 12.3% margin for the Maxwell part. This is a meaningful win, but the context matters. The GTX 460 v2's average benchmark score of 8743 exactly matches its single OpenCL result, indicating that no Vulkan score is available for it. The 850M, by contrast, also has a Geekbench Vulkan score of 8782, which is slightly below its OpenCL score but still above the GTX 460 v2's OpenCL number.
Looking at the nearest rivals puts these scores in perspective. The 850M's average of 9302 places it just above the GTX 465 (9294) and just below the Radeon R7 M380 (9313), with margins under 0.1% either way. The GTX 460 v2's 8743 average sits essentially tied with the RTX 3050 A Mobile (8746, 0% delta) and about 1.4% behind the Radeon Pro WX 5100 (8863). The 850M's percentile ranking of 46 versus the GTX 460 v2's 44 reflects this modest but consistent edge.
The 12.3% head-to-head delta is larger than what the percentile difference alone would suggest, indicating the OpenCL workload specifically favors the 850M's Maxwell architecture. The 850M's higher FP32 throughput and newer compute pipeline likely contribute, though the GTX 460 v2's superior memory bandwidth does not translate into a win in this test.
The Verdict
The data supports a clear but nuanced conclusion. The GTX 850M wins the only direct benchmark comparison by 12.3% and offers modern API support including Vulkan 1.4, which the GTX 460 v2 lacks entirely. It also does this at a fraction of the power draw: 45 W versus 160 W, with no external power connectors needed. For any scenario where efficiency, portability, or modern API compatibility matters, the 850M is the obvious choice.
However, the GTX 460 v2 is not without merits. Its 96.19 GB/s memory bandwidth is a massive advantage over the 850M's 32.03 GB/s, which could matter in bandwidth-bound scenarios such as high-resolution textures or certain compute workloads. It also has higher texture fill rate (43.62 GTexel/s vs 36.08 GTexel/s) and more ROPs (24 vs 16). The GTX 460 v2's launch MSRP was 199 USD, though pricing should not factor into a pure performance assessment.
For a builder choosing between these two today, the 850M is the better all-around card based on benchmark evidence. The Vulkan support alone is a significant practical advantage, as it enables compatibility with modern games and applications that the GTX 460 v2 cannot run. The 12.3% performance lead in the available benchmark reinforces this. The GTX 460 v2 only makes sense if you specifically need its memory bandwidth and texture throughput and can tolerate its 160 W power draw and dual-slot footprint.
Specification Differences
| Specification | GTX 850M | GTX 460 v2 |
|---|---|---|
| Architecture | Maxwell | Fermi 2.0 |
| Process node | 28 nm | 40 nm |
| Transistors | 1,870 million | 1,950 million |
| Die size | 148 mm² | 332 mm² |
| Transistor density | 12.6M / mm² | 5.9M / mm² |
| Memory size | 2 GB | 1024 MB |
| Memory type | DDR3 | GDDR5 |
| Memory bus | 128 bit | 192 bit |
| Memory bandwidth | 32.03 GB/s | 96.19 GB/s |
| Memory clock | 1001 MHz (2 Gbps effective) | 1002 MHz (4 Gbps effective) |
| Shading units | 640 | 336 |
| TMUs | 40 | 56 |
| ROPs | 16 | 24 |
| Pixel rate | 14.43 GPixel/s | 10.91 GPixel/s |
| Texture rate | 36.08 GTexel/s | 43.62 GTexel/s |
| FP32 | 1,154.6 GFLOPS | 1,046.3 GFLOPS |
| TDP | 45 W | 160 W |
| Slot width | IGP | Dual-slot |
| Power connectors | None | 2x 6-pin |
| Suggested PSU | None listed | 450 W |
| Bus interface | PCIe 3.0 x16 | PCIe 2.0 x16 |
| Display outputs | Portable Device Dependent | 2x DVI, 1x mini-HDMI 1.3a |
| DirectX | 12 (11_0) | 12 (11_0) |
| OpenGL | 4.6 | 4.6 |
| Vulkan | 1.4 | None |
| Release date | 2014-03-11 | 2011-09-23 |
| Predecessor | GeForce 700M | GeForce 200 |
| Successor | GeForce 900M | GeForce 500 |
Where Each One Wins
The GTX 850M wins in compute performance, as demonstrated by its 12.3% OpenCL advantage and higher FP32 throughput (1,154.6 GFLOPS vs 1,046.3 GFLOPS). It also wins decisively on efficiency: 45 W TDP versus 160 W, no power connectors versus dual 6-pin, and IGP slot width versus dual-slot. Modern API support is another clear win — Vulkan 1.4 is available on the 850M but absent on the GTX 460 v2. The 850M also has double the memory capacity (2 GB vs 1024 MB), which helps in memory-hungry applications even with lower bandwidth.
The GTX 460 v2 wins on memory bandwidth by a wide margin (96.19 GB/s vs 32.03 GB/s), which makes it better suited for workloads that stream large amounts of data. It also has higher texture fill rate (43.62 GTexel/s vs 36.08 GTexel/s) and more ROPs (24 vs 16), suggesting better performance in fill-rate-limited scenarios. The GTX 460 v2's pixel rate is lower (10.91 GPixel/s vs 14.43 GPixel/s), so its ROP advantage does not translate to pixel throughput dominance.
For practical use cases, the 850M suits laptop builds or compact systems where power and space are constrained, and where Vulkan support opens up modern software compatibility. The GTX 460 v2 suits a desktop build where you have a 450 W PSU, dual-slot clearance, and a workload that leverages its high bandwidth — though its lack of Vulkan support means modern gaming is largely off the table. Benchmark data ultimately favors the 850M in the one direct comparison available, and its feature set makes it the more future-proof choice despite the GTX 460 v2's bandwidth advantage.