NVIDIA GeForce GTX 1060 6 GB vs NVIDIA Quadro RTX 5000 Comparison
NVIDIA GeForce GTX 1060 6 GB
Quadro RTX 5000
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1060 6 GB vs NVIDIA Quadro RTX 5000
The GeForce GTX 1060 6 GB and the Quadro RTX 5000 occupy the same percentile rank among all GPUs (both at 67), and their average benchmark scores are nearly identical — 21,856 for the GTX 1060 versus 21,629 for the Quadro RTX 5000, a difference of just 1%. Yet these two cards are built for entirely different workloads, and the head-to-head data shows a stark split: the Quadro RTX 5000 wins both direct comparisons by massive margins, while the GTX 1060’s overall average is propped up by a different benchmark mix. The data does not show a balanced fight; it shows two tools with different targets, where the older, cheaper card holds its own only in aggregate scoring, not in the specific tests where they face off directly.
Where Each One Wins
The Quadro RTX 5000 wins every head-to-head benchmark recorded in the data. In Geekbench OpenCL, it scores 78,999 against the GTX 1060’s 32,322 — a 59.1% lead. In Geekbench Vulkan, it posts 92,309 versus 18,659, a 79.8% advantage. These are not narrow wins; they are generational and architectural gaps. The RTX 5000’s advantage comes from its Turing architecture, which brings 48 RT cores and 384 tensor cores, while the GTX 1060 has none of either. That hardware difference shows up directly in compute-oriented workloads, where the RTX 5000’s 11.15 TFLOPS FP32 performance and 22.30 TFLOPS FP16 (2:1 ratio) dwarf the GTX 1060’s 4.375 TFLOPS FP32 and 68.36 GFLOPS FP16 (1:64 ratio).
The GTX 1060, however, wins in the aggregate benchmark average, scoring 21,856 versus the RTX 5000’s 21,629, a 1% edge. That average includes the GTX 1060’s Geekbench Metal score of 14,587, a test the RTX 5000 does not appear in. The GTX 1060 also posts a higher Geekbench OpenCL score relative to its own average, but that still falls far short of the RTX 5000. So the GTX 1060’s “win” is really about benchmark coverage — it participates in tests where the RTX 5000 is absent, and its scores there are high enough to lift its average above the RTX 5000’s. In any test where both cards appear, the RTX 5000 wins decisively.
For use cases, the split is clear. The GTX 1060 is a Pascal-era consumer card with 6 GB of GDDR5 memory and a 192-bit bus, delivering 192.2 GB/s of bandwidth. The RTX 5000 is a Turing-based workstation card with 16 GB of GDDR6 memory on a 256-bit bus, offering 448.0 GB/s. The RTX 5000’s advantage in memory capacity and bandwidth, combined with its RT and tensor cores, makes it the choice for workloads that stress compute, ray tracing, or large datasets. The GTX 1060, with its lower TDP of 120 W versus 230 W and a single 6-pin power connector versus the RTX 5000’s 6-pin plus 8-pin, fits scenarios where power draw and physical footprint matter more than raw throughput.
The Verdict
Pick the Quadro RTX 5000 if your work involves modern compute APIs, ray tracing, or large memory buffers. The data is unambiguous: it beats the GTX 1060 by 59.1% in OpenCL and 79.8% in Vulkan. Its 16 GB of GDDR6 memory is more than double the GTX 1060’s 6 GB, and its 448.0 GB/s bandwidth is 2.33 times higher. The RTX 5000 also supports DirectX 12 Ultimate (12_2), while the GTX 1060 is limited to DirectX 12 (12_1). For any task that scales with shading units, texture units, or memory throughput, the RTX 5000 is the only rational choice from the data.
Pick the GeForce GTX 1060 6 GB if your priority is a lower-power, smaller-footprint card that still delivers a competitive average score in a mixed benchmark suite. Its 120 W TDP is nearly half the RTX 5000’s 230 W, and it requires a 300 W suggested PSU versus 550 W. The GTX 1060 also has a shorter length (250 mm versus 267 mm) and the same 111 mm height. Its 67th percentile ranking matches the RTX 5000, and its average score is actually 1% higher. But that 1% edge comes from benchmarks where the RTX 5000 does not compete, not from a real performance advantage. If you need raw compute, the RTX 5000 wins every direct test.
The verdict from the data: the RTX 5000 is the superior card for demanding workloads, and the GTX 1060 is the superior card for modest power budgets and legacy compatibility. There is no scenario in the head-to-head data where the GTX 1060 beats the RTX 5000 in a shared test.
Head-to-Head Benchmarks
The two recorded head-to-head tests both go to the Quadro RTX 5000, and both by wide margins. In Geekbench OpenCL, the RTX 5000 scores 78,999 against the GTX 1060’s 32,322. That is a delta of 59.1%, meaning the RTX 5000 delivers roughly 2.44 times the OpenCL performance. This test exercises general-purpose compute, and the RTX 5000’s 3,072 shading units versus 1,280, plus 192 TMUs versus 80, and 64 ROPs versus 48, explain the gap. The RTX 5000’s texture rate of 348.5 GTexel/s is 2.55 times the GTX 1060’s 136.7 GTexel/s, and its pixel rate of 116.2 GPixel/s is 1.42 times higher.
In Geekbench Vulkan, the margin is even larger. The RTX 5000 scores 92,309, while the GTX 1060 manages only 18,659. That is a 79.8% delta, or a 4.95 times performance advantage. Vulkan is a low-level graphics API, and the RTX 5000’s Turing architecture, with its dedicated RT and tensor cores, plus higher clock speeds (1,620 MHz base and 1,815 MHz boost versus 1,506 MHz and 1,709 MHz), contributes to this result. The RTX 5000’s FP32 throughput of 11.15 TFLOPS is 2.55 times the GTX 1060’s 4.375 TFLOPS, and its FP16 throughput of 22.30 TFLOPS (2:1) is vastly higher than the GTX 1060’s 68.36 GFLOPS (1:64).
The GTX 1060’s only comparative wins are in benchmarks where the RTX 5000 has no recorded score. Its Geekbench Metal score of 14,587 and its average of 21,856 across all tests give it a narrow aggregate edge. But in the two tests where both cards appear, the RTX 5000 wins by margins that far exceed the 1% average difference. The head-to-head data tells a one-sided story.
FAQ
Q: Which card has the higher average benchmark score?
A: The GeForce GTX 1060 6 GB has an average benchmark score of 21,856, which is 1% higher than the Quadro RTX 5000’s 21,629.
Q: How much faster is the Quadro RTX 5000 in Geekbench OpenCL?
A: The RTX 5000 scores 78,999 versus the GTX 1060’s 32,322, a 59.1% lead.
Q: Does the GTX 1060 win any head-to-head benchmark?
A: No. The GTX 1060 loses both recorded head-to-head tests — Geekbench OpenCL and Geekbench Vulkan.
Q: What is the memory capacity difference?
A: The GTX 1060 has 6 GB of GDDR5 memory, while the RTX 5000 has 16 GB of GDDR6 memory.
Q: Which card supports DirectX 12 Ultimate?
A: Only the Quadro RTX 5000 supports DirectX 12 Ultimate (12_2). The GTX 1060 is limited to DirectX 12 (12_1).
Q: What is the TDP difference?
A: The GTX 1060 has a 120 W TDP, while the RTX 5000 has a 230 W TDP. The GTX 1060 also requires a 300 W suggested PSU versus 550 W for the RTX 5000.
Architecture Differences
The two cards come from different NVIDIA architectures. The GTX 1060 uses the Pascal architecture on a GP106 chip, built on a 16 nm process at TSMC. It packs 4,400 million transistors on a 200 mm² die, yielding a transistor density of 22.0M per mm². The RTX 5000 uses the Turing architecture on a TU104 chip, built on a 12 nm process at TSMC. It has 13,600 million transistors on a 545 mm² die, with a density of 25.0M per mm². The RTX 5000’s die is 2.7 times larger and holds 3.1 times more transistors.
The RTX 5000 introduces dedicated hardware absent from the GTX 1060: 48 RT cores for ray tracing and 384 tensor cores for AI workloads. The GTX 1060 has neither. The RTX 5000 also has 3,072 shading units, 192 TMUs, and 64 ROPs, versus the GTX 1060’s 1,280 shading units, 80 TMUs, and 48 ROPs. Clock speeds favor the RTX 5000 as well: 1,620 MHz base and 1,815 MHz boost, versus 1,506 MHz and 1,709 MHz. FP16 performance is a major differentiator — the RTX 5000 runs FP16 at 22.30 TFLOPS with a 2:1 ratio, while the GTX 1060 manages only 68.36 GFLOPS at a 1:64 ratio, meaning FP16 is heavily de-emphasized on Pascal.
The RTX 5000 supports DirectX 12 Ultimate (12_2), while the GTX 1060 is capped at DirectX 12 (12_1). Both support OpenGL 4.6 and Vulkan 1.4. The RTX 5000’s memory system is also more advanced: 16 GB of GDDR6 on a 256-bit bus, versus 6 GB of GDDR5 on a 192-bit bus. The RTX 5000’s memory clock is 1,750 MHz (14 Gbps effective), while the GTX 1060 runs at 2,002 MHz (8 Gbps effective) — but the wider bus and newer memory type give the RTX 5000 448.0 GB/s of bandwidth versus 192.2 GB/s.
Specification Differences
The two cards differ across nearly every major specification. The GTX 1060 has 6 GB of GDDR5 memory with a 192-bit bus and 192.2 GB/s bandwidth, while the RTX 5000 has 16 GB of GDDR6 memory with a 256-bit bus and 448.0 GB/s bandwidth. Shading units are 1,280 versus 3,072; TMUs are 80 versus 192; ROPs are 48 versus 64. The RTX 5000 has 48 RT cores and 384 tensor cores; the GTX 1060 has none. Pixel rate is 82.03 GPixel/s for the GTX 1060 and 116.2 GPixel/s for the RTX 5000. Texture rate is 136.7 GTexel/s versus 348.5 GTexel/s. FP32 performance is 4.375 TFLOPS versus 11.15 TFLOPS, and FP16 is 68.36 GFLOPS (1:64) versus 22.30 TFLOPS (2:1).
TDP is 120 W for the GTX 1060 and 230 W for the RTX 5000. The GTX 1060 uses a single 6-pin power connector and a 300 W suggested PSU; the RTX 5000 uses a 6-pin plus 8-pin and a 550 W suggested PSU. Both are dual-slot cards, but the GTX 1060 is 250 mm long (9.8 inches) versus the RTX 5000’s 267 mm (10.5 inches); both are 111 mm (4.4 inches) high. Display outputs differ: the GTX 1060 has 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a, while the RTX 5000 has 4x DisplayPort 1.4a and 1x USB Type-C. The GTX 1060 was released on 2016-07-18; the RTX 5000 on 2018-08-12. Both are end-of-life, but the GTX 1060’s predecessor is GeForce 900 and its successor is GeForce 20, while the RTX 5000’s predecessor is Quadro Volta and its successor is Workstation Ampere. The GTX 1060 has a launch MSRP of 299 USD; the RTX 5000 has a launch MSRP of 2,299 USD.