NVIDIA GeForce GTX 1060 5 GB vs NVIDIA TITAN V Comparison
NVIDIA GeForce GTX 1060 5 GB
TITAN V
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1060 5 GB vs NVIDIA TITAN V
NVIDIA’s TITAN V and GeForce GTX 1060 5 GB sit at opposite ends of the company’s 10-series generation, yet both are listed as end-of-life products. The data reveals a stark performance chasm, but also a clear division of labor. The TITAN V is a compute-oriented flagship with a 79th percentile rank across all GPUs, while the GTX 1060 5 GB, at the 78th percentile, is a far more modest mainstream part. The head-to-head results are lopsided, but the architectural story behind those numbers is what separates a halo product from a workhorse.
Where Each One Wins
The TITAN V wins every benchmark where both cards have recorded scores. In Geekbench OpenCL, it posts 157,265 points against the GTX 1060 5 GB’s 33,397, a 370.9% margin. In Geekbench Vulkan, the TITAN V scores 152,117 versus 33,991, a 347.5% advantage. These are not marginal victories; they represent a completely different performance class. The TITAN V’s average benchmark score of 34,355 places it within 0.4% of the RTX A1000 and 0.6% of the RTX A2000 12 GB, while the GTX 1060 5 GB’s 33,694 average sits between the RTX A5000 and AMD RX 7700S. The TITAN V also has a broader benchmark footprint, with results across 3DMark Steel Nomad, Passmark DX9/10/11/12, G2D, G3D, and compute tests. The GTX 1060 5 GB only has Geekbench entries in the shared set.
The GTX 1060 5 GB’s wins are not in raw speed but in efficiency and physical footprint. Its 120 W TDP is less than half the TITAN V’s 250 W, and it requires only a single 6-pin power connector versus the TITAN V’s 1x 6-pin plus 1x 8-pin. The suggested PSU is 300 W versus 600 W. The GTX 1060 5 GB is also shorter at 250 mm (9.8 inches) compared to the TITAN V’s 267 mm (10.5 inches). For a system constrained by power delivery or chassis space, the GTX 1060 5 GB is the only viable choice, even if its performance ceiling is far lower.
Architecture Differences
The two cards are built on entirely different architectures. The TITAN V uses the GV100 chip on TSMC’s 12 nm process, with 21,100 million transistors on an 815 mm² die. The GTX 1060 5 GB uses the GP106 chip on a 16 nm process, with 4,400 million transistors on a 200 mm² die. The transistor density tells the story: the TITAN V packs 25.9M transistors per mm² versus the GTX 1060 5 GB’s 22.0M. The TITAN V is a Volta part, while the GTX 1060 5 GB is Pascal. Both are listed under the GeForce 10 generation, but Volta introduces features Pascal lacks.
The TITAN V has 5,120 shading units, 320 TMUs, and 96 ROPs, versus 1,280 shading units, 80 TMUs, and 40 ROPs on the GTX 1060 5 GB. The TITAN V also includes 640 tensor cores; the GTX 1060 5 GB has none. Memory is another chasm: the TITAN V uses 12 GB of HBM2 on a 3072-bit bus, yielding 651.3 GB/s bandwidth. The GTX 1060 5 GB uses 5 GB of GDDR5 on a 160-bit bus, with 160.2 GB/s. The TITAN V’s FP32 throughput is 14.90 TFLOPS, while the GTX 1060 5 GB manages 4.375 TFLOPS. In FP16, the TITAN V achieves 29.80 TFLOPS (2:1 ratio), while the GTX 1060 5 GB’s FP16 is a negligible 68.36 GFLOPS (1:64 ratio). The TITAN V also has higher pixel and texture rates: 139.7 GPixel/s and 465.6 GTexel/s, versus 68.36 GPixel/s and 136.7 GTexel/s.
Clock speeds tell a different story. The GTX 1060 5 GB runs a base clock of 1506 MHz and a boost of 1709 MHz, while the TITAN V’s base is 1200 MHz with a boost of 1455 MHz. The GTX 1060 5 GB’s memory runs at 2002 MHz (8 Gbps effective), while the TITAN V’s HBM2 runs at 848 MHz (1696 Mbps effective). The lower clocks on the TITAN V are offset by its massive parallel resources and memory bandwidth. Both cards support DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, so API compatibility is identical.
The Verdict
The data is unambiguous for raw compute and gaming performance: the TITAN V dominates. In Geekbench OpenCL, its score is 4.7 times higher, and in Vulkan it is 4.5 times higher. The TITAN V’s 79th percentile ranking is only one point above the GTX 1060 5 GB’s 78th, but that similarity is misleading—the average benchmark score gap is only 661 points because the GTX 1060 5 GB’s limited benchmark set (only Geekbench tests) pulls its average up, while the TITAN V’s broader suite includes lower-scoring Passmark tests. The TITAN V’s nearest rivals are workstation-class cards like the RTX A1000 and RTX A2000 12 GB, while the GTX 1060 5 GB sits near the RTX A5000 and AMD RX 7700S, a clear tier difference.
For a user needing maximum FP32 or FP16 compute, tensor core acceleration, or massive memory bandwidth, the TITAN V is the only choice. Its 12 GB HBM2 buffer and 651.3 GB/s bandwidth are in a different league. For a user building a low-power system—the GTX 1060 5 GB’s 120 W TDP and 300 W PSU requirement are half the TITAN V’s—the Pascal card is the pragmatic pick. It is also shorter, making it easier to fit in smaller cases. However, the GTX 1060 5 GB has no tensor cores, no FP16 headroom, and a 160-bit memory bus that limits its performance in bandwidth-sensitive workloads. The TITAN V is the clear winner for anyone who can supply 250 W and a 600 W PSU. The GTX 1060 5 GB is for constrained builds where the TITAN V’s power and size are non-starters.
FAQ
Q: Which card has a higher average benchmark score?
A: The NVIDIA TITAN V has an average benchmark score of 34,355, while the NVIDIA GeForce GTX 1060 5 GB has 33,694. The TITAN V is ahead by 661 points.
Q: How much faster is the TITAN V in Geekbench Vulkan?
A: The TITAN V scores 152,117, while the GTX 1060 5 GB scores 33,991, a delta of 347.5%.
Q: Do both cards support the same DirectX version?
A: Yes, both support DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4.
Q: What is the memory configuration difference?
A: The TITAN V has 12 GB of HBM2 on a 3072-bit bus with 651.3 GB/s bandwidth. The GTX 1060 5 GB has 5 GB of GDDR5 on a 160-bit bus with 160.2 GB/s bandwidth.
Q: Which card has tensor cores?
A: Only the TITAN V includes 640 tensor cores. The GTX 1060 5 GB has none.
Q: What is the TDP difference?
A: The TITAN V has a 250 W TDP and requires a 600 W PSU, while the GTX 1060 5 GB has a 120 W TDP and requires a 300 W PSU.
Head-to-Head Benchmarks
The only two tests where both cards have recorded scores are Geekbench OpenCL and Geekbench Vulkan, and the TITAN V wins both by enormous margins. In Geekbench OpenCL, the TITAN V scores 157,265 against the GTX 1060 5 GB’s 33,397. That is a delta of 370.9%. In practical terms, the TITAN V delivers roughly 4.7 times the OpenCL performance. The Vulkan result is similar: 152,117 versus 33,991, a 347.5% delta, or about 4.5 times the performance.
These margins dwarf the differences seen in the nearest rival comparisons. The TITAN V’s closest rival, the AMD Radeon HD 7970, is only 0.5% behind, and the NVIDIA T1000 8 GB is 0.6% behind. The GTX 1060 5 GB’s closest rival, the RTX A5000, is 0.2% ahead, and the AMD Radeon HD 7950 is 0.8% behind. The head-to-head deltas are over 300 percentage points, meaning the TITAN V is not just faster—it is in a different performance strata. The GTX 1060 5 GB’s only consolation is that it has no recorded losses in other benchmarks, but that is because it has no other recorded benchmark scores in the shared set.
The TITAN V’s other benchmark results show its breadth: 3DMark Steel Nomad DX12 at 3,565, Passmark G3D at 19,805, and Passmark GPU Compute at 9,263. The GTX 1060 5 GB has no entries for these tests, so no direct comparison is possible. The TITAN V also wins on pixel and texture rates—139.7 GPixel/s and 465.6 GTexel/s versus 68.36 GPixel/s and 136.7 GTexel/s—which are derived from its higher ROP and TMU counts. The GTX 1060 5 GB’s higher boost clock of 1709 MHz does not compensate for having only 40 ROPs and 80 TMUs.
Specification Differences
The two cards differ in nearly every hardware category. The TITAN V uses a GV100 chip on a 12 nm process with 21,100 million transistors and an 815 mm² die. The GTX 1060 5 GB uses a GP106 chip on a 16 nm process with 4,400 million transistors and a 200 mm² die. Transistor density is 25.9M / mm² for the TITAN V versus 22.0M / mm² for the GTX 1060 5 GB. The TITAN V has 5,120 shading units, 320 TMUs, and 96 ROPs; the GTX 1060 5 GB has 1,280 shading units, 80 TMUs, and 40 ROPs. The TITAN V adds 640 tensor cores; the GTX 1060 5 GB has none.
Memory is split by type and capacity: 12 GB HBM2 on a 3072-bit bus with 651.3 GB/s bandwidth versus 5 GB GDDR5 on a 160-bit bus with 160.2 GB/s bandwidth. The TITAN V’s base clock is 1200 MHz and boost is 1455 MHz, while the GTX 1060 5 GB runs 1506 MHz base and 1709 MHz boost. The TITAN V’s memory clock is 848 MHz (1696 Mbps effective), while the GTX 1060 5 GB’s is 2002 MHz (8 Gbps effective). Pixel rate is 139.7 GPixel/s versus 68.36 GPixel/s; texture rate is 465.6 GTexel/s versus 136.7 GTexel/s. FP32 is 14.90 TFLOPS versus 4.375 TFLOPS; FP16 is 29.80 TFLOPS (2:1) versus 68.36 GFLOPS (1:64).
Power and physical specs diverge sharply: TDP is 250 W versus 120 W, with the TITAN V requiring 1x 6-pin + 1x 8-pin connectors and a 600 W PSU, while the GTX 1060 5 GB uses a single 6-pin and a 300 W PSU. The TITAN V is 267 mm long, 112 mm high, and 40 mm wide; the GTX 1060 5 GB is 250 mm long, with no height or width listed. Display outputs differ: the TITAN V has 1x HDMI 2.0 and 3x DisplayPort 1.4a, while the GTX 1060 5 GB has 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a. Both are dual-slot, PCIe 3.0 x16, end-of-life, and share the same release-era predecessor and successor. The TITAN V has a launch MSRP of 2,999 USD; the GTX 1060 5 GB has no launch MSRP listed.