NVIDIA GeForce GTX 1060 5 GB vs NVIDIA T1000 Comparison
NVIDIA GeForce GTX 1060 5 GB
T1000
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1060 5 GB vs NVIDIA T1000
FAQ
Q: Which GPU wins in OpenCL and Vulkan benchmarks?
A: The NVIDIA T1000 wins both head-to-head tests. It scores 37,704 in Geekbench OpenCL versus 33,397 for the GTX 1060 5 GB (a 12.9% delta), and 34,874 in Vulkan versus 33,991 (a 2.6% delta).
Q: How do the two cards compare in memory capacity and bandwidth?
A: The GTX 1060 5 GB has more memory (5 GB GDDR5) and a slightly higher bandwidth of 160.2 GB/s. The T1000 has 4 GB GDDR6 but a nearly identical bandwidth of 160.0 GB/s.
Q: Which GPU has a higher transistor density despite similar die sizes?
A: The T1000, using a 12 nm process, packs 4,700 million transistors into a 200 mm² die, yielding 23.5M / mm². The GTX 1060 5 GB, on 16 nm, has 4,400 million transistors in the same 200 mm² area, for 22.0M / mm².
Q: Are there differences in power connector requirements?
A: Yes. The T1000 requires no power connectors and has a 50 W TDP with a suggested 250 W PSU. The GTX 1060 5 GB needs a single 6-pin connector, has a 120 W TDP, and suggests a 300 W PSU.
Q: What is the difference in shading unit count?
A: The GTX 1060 5 GB has 1,280 shading units, while the T1000 has 896. This gives the GTX 1060 a higher theoretical FP32 throughput (4.375 TFLOPS vs 2.500 TFLOPS).
Q: Which card is more compact in terms of physical length?
A: The T1000 is a single-slot card at 156 mm (6.1 inches) long. The GTX 1060 5 GB is a dual-slot card and measures 250 mm (9.8 inches) in length.
---
Architecture Differences
The two GPUs represent distinct architectural generations from NVIDIA, which explains their contrasting design priorities. The T1000 is built on the Turing architecture (chip TU117) using a 12 nm process at TSMC, while the GTX 1060 5 GB is a Pascal part (chip GP106) fabricated on a 16 nm process, also at TSMC. This node difference is reflected in transistor density: the T1000 packs 23.5M transistors per mm² versus 22.0M for the GTX 1060, despite both dies measuring exactly 200 mm².
The memory subsystems tell a story of different trade-offs. The T1000 uses 4 GB of GDDR6 memory on a 128-bit bus, achieving 160.0 GB/s bandwidth. The GTX 1060 5 GB counters with 5 GB of GDDR5 on a wider 160-bit bus, yielding a nearly identical 160.2 GB/s. This means bandwidth is effectively a wash, but the GTX 1060 offers 25% more capacity, which can matter for texture-heavy workloads.
Compute resources are heavily skewed toward the Pascal card. The GTX 1060 5 GB has 1,280 shading units, 80 texture mapping units (TMUs), and 40 raster output units (ROPs). The T1000 is more modest with 896 shading units, 56 TMUs, and 32 ROPs. Consequently, the GTX 1060 delivers 4.375 TFLOPS of FP32 performance and 136.7 GTexel/s texture rate, versus 2.500 TFLOPS and 78.12 GTexel/s for the T1000. However, the T1000 has a significant FP16 advantage: 5.000 TFLOPS (at 2:1 ratio) versus a paltry 68.36 GFLOPS (at 1:64 ratio) for the GTX 1060.
Clock speeds also differ substantially. The GTX 1060 runs at a 1506 MHz base and 1709 MHz boost, while the T1000 operates at 1065 MHz base and 1395 MHz boost. This higher clocking partially explains the GTX 1060’s raw throughput advantage. Interestingly, the T1000 compensates with higher memory clock speed: 1250 MHz (10 Gbps effective) versus 2002 MHz (8 Gbps effective) for the GTX 1060, though the latter’s wider bus neutralizes this.
Physical and power characteristics differ sharply. The T1000 is a single-slot, 156 mm card with no power connectors and a 50 W TDP, suggesting a 250 W PSU. The GTX 1060 5 GB is a dual-slot, 250 mm card requiring a 6-pin connector, with a 120 W TDP and a 300 W PSU recommendation. Display outputs also diverge: the T1000 offers 4x mini-DisplayPort 1.4a, while the GTX 1060 provides 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a. Both support DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4.
---
The Verdict
The data presents a fascinating split between efficiency-driven design and brute-force compute. The NVIDIA T1000 wins both benchmark tests, but the margin tells the real story. In OpenCL, the T1000 leads by 12.9%, a substantial gap that suggests its Turing architecture and GDDR6 memory provide real-world advantages beyond raw specs. In Vulkan, the lead shrinks to just 2.6%, indicating the GTX 1060 5 GB is nearly competitive in that API.
For users prioritizing raw compute throughput, the GTX 1060 5 GB is objectively stronger on paper: 75% more shading units, 43% higher FP32, and 75% higher texture rate. Yet benchmark results contradict this theoretical advantage, implying the T1000’s architecture is far more efficient per unit of work. The T1000 also offers superior FP16 performance (5.000 TFLOPS vs 68.36 GFLOPS), which could be decisive for workloads leveraging mixed-precision computation.
The power envelope is a major differentiator. The T1000 sips 50 W versus 120 W for the GTX 1060, and it requires no auxiliary power connector. This makes the T1000 viable for compact, single-slot systems with modest PSUs (250 W suggested), whereas the GTX 1060 demands a dual-slot footprint and a 6-pin connector. For workstation environments with dense chassis or limited power budgets, the T1000 is clearly the safer choice.
However, the GTX 1060 5 GB’s extra gigabyte of memory (5 GB vs 4 GB) is a tangible advantage for larger datasets or higher-resolution textures, even if bandwidth is essentially equal. The card’s higher clock speeds (1506/1709 MHz vs 1065/1395 MHz) also suggest it may handle sustained loads differently, though the T1000’s 80th percentile versus 78th percentile ranking among all GPUs indicates both are mid-tier performers.
The verdict hinges on use case. If the priority is maximum benchmark performance, power efficiency, and modern feature support (Turing, GDDR6, FP16), the T1000 is the data-backed winner. If the priority is raw compute headroom, memory capacity, and lower cost of entry (though pricing is not analyzed here), the GTX 1060 5 GB remains a credible alternative despite losing both head-to-head tests.
---
Specification Differences
| Specification | NVIDIA T1000 | NVIDIA GeForce GTX 1060 5 GB |
|---|---|---|
| Architecture | Turing | Pascal |
| Process Node | 12 nm | 16 nm |
| Transistors | 4,700 million | 4,400 million |
| Transistor Density | 23.5M / mm² | 22.0M / mm² |
| Base Clock | 1065 MHz | 1506 MHz |
| Boost Clock | 1395 MHz | 1709 MHz |
| Memory Size | 4 GB | 5 GB |
| Memory Type | GDDR6 | GDDR5 |
| Memory Bus Width | 128 bit | 160 bit |
| Memory Clock | 1250 MHz (10 Gbps effective) | 2002 MHz (8 Gbps effective) |
| Shading Units | 896 | 1280 |
| TMUs | 56 | 80 |
| ROPs | 32 | 40 |
| Pixel Rate | 44.64 GPixel/s | 68.36 GPixel/s |
| Texture Rate | 78.12 GTexel/s | 136.7 GTexel/s |
| FP32 Performance | 2.500 TFLOPS | 4.375 TFLOPS |
| FP16 Performance | 5.000 TFLOPS (2:1) | 68.36 GFLOPS (1:64) |
| TDP | 50 W | 120 W |
| Slot Width | Single-slot | Dual-slot |
| Power Connectors | None | 1x 6-pin |
| Suggested PSU | 250 W | 300 W |
| Length | 156 mm (6.1 inches) | 250 mm (9.8 inches) |
| Display Outputs | 4x mini-DisplayPort 1.4a | 1x DVI, 1x HDMI 2.0, 3x DisplayPort 1.4a |
| Release Date | 2021-05-05 | 2017-12-25 |
---
Head-to-Head Benchmarks
The two Geekbench tests provide a clear, if nuanced, picture of performance. In the OpenCL test, the T1000 achieves a score of 37,704 against the GTX 1060 5 GB’s 33,397. This 12.9% advantage is significant and cannot be explained by the specification sheet alone, as the GTX 1060 has far higher theoretical throughput. This suggests the T1000’s Turing architecture, with its updated memory subsystem (GDDR6) and possibly better driver optimization, delivers more efficient execution of OpenCL workloads.
The Vulkan test narrows the gap considerably. The T1000 scores 34,874 versus 33,991 for the GTX 1060, a delta of just 2.6%. This smaller margin implies that Vulkan’s lower-level API allows the GTX 1060’s raw compute resources to shine more effectively, nearly closing the architectural gap. It also hints that the T1000’s advantage in OpenCL may be specific to that API’s characteristics rather than a universal performance lead.
Looking at the broader benchmark context, the T1000’s average benchmark score is 36,289, placing it in the 80th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 5300M (36,529, -0.7%) and the NVIDIA GeForce GTX TITAN X (36,530, -0.7%), showing it sits in a tightly contested performance band. The GTX 1060 5 GB averages 33,694, at the 78th percentile, with rivals like the NVIDIA RTX A5000 (33,622, +0.2%) and AMD Radeon RX 7700S (33,849, -0.5%). This places the two cards in adjacent performance tiers, with the T1000 holding a roughly 7.7% lead in average score.
The win count is decisive: the T1000 takes 2 wins and 0 losses in the head-to-head. Yet the data invites a question: why does a card with nearly half the FP32 throughput win? The answer likely lies in the T1000’s 12 nm process, higher transistor density, and GDDR6 memory, which may reduce latency and improve memory efficiency despite lower bandwidth. The GTX 1060’s higher clocks (1506/1709 MHz) and more shading units do not translate into benchmark dominance, suggesting diminishing returns in these specific tests.
---
Where Each One Wins
The NVIDIA T1000 wins in OpenCL and Vulkan benchmarks, but its strengths extend beyond raw scores. Its 50 W TDP and single-slot design make it the clear choice for low-power, space-constrained systems. The absence of power connectors and a 250 W PSU recommendation mean it can slot into existing workstations without upgrades. Its FP16 performance (5.000 TFLOPS) is an order of magnitude higher than the GTX 1060’s, indicating a strong fit for workloads using mixed-precision arithmetic. The 4x mini-DisplayPort 1.4a outputs also suit multi-display professional setups. For users prioritizing the 80th percentile ranking and a 12.9% OpenCL lead, the T1000 is the data-driven winner.
The GTX 1060 5 GB wins on raw compute specification. Its 4.375 TFLOPS FP32, 136.7 GTexel/s texture rate, and 68.36 GPixel/s pixel rate dwarf the T1000’s numbers, making it theoretically superior for traditional rasterization tasks. The 5 GB memory capacity provides more headroom for large textures or datasets, and the 160-bit bus offers slightly higher bandwidth (160.2 GB/s vs 160.0 GB/s). Its higher clock speeds (1709 MHz boost) suggest it may excel in scenarios where frequency is the bottleneck. The dual-slot design and 6-pin connector imply it is intended for more robust desktop systems with adequate power delivery. For users who value theoretical compute over benchmark efficiency, the GTX 1060 5 GB has a clear case.
The use-case split is stark: the T1000 is optimized for efficiency, modern architecture, and API-specific performance, while the GTX 1060 5 GB is a brute-force compute card with more memory and higher raw throughput. Benchmark data favors the T1000, but specification analysis favors the GTX 1060. The choice depends on whether the workload responds better to architectural efficiency (T1000) or raw resource availability (GTX 1060).