NVIDIA GeForce GTX 1060 5 GB vs NVIDIA Quadro GV100 Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GTX 1060 5 GB

CORE STATE GP106
VRAM 5 GB
CLOCK SPEED 1709 MHz
TDP 120 W
BUS WIDTH 160 bit
ARCHITECTURE Pascal
nm
PROCESS 16 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

Quadro GV100

CORE STATE GV100
VRAM 32 GB
CLOCK SPEED 1627 MHz
TDP 250 W
BUS WIDTH 4096 bit
ARCHITECTURE Volta
nm
PROCESS 12 nm
LAUNCH DATE 2018

PERFORMANCE BENCHMARKS

geekbench_opencl
33,397
150,004
geekbench_vulkan
33,991
139,526
passmark_directx_10
N/A
140
passmark_directx_11
N/A
168
passmark_directx_12
N/A
84
passmark_directx_9
N/A
207
passmark_g2d
N/A
836
passmark_g3d
N/A
19,650
passmark_gpu_compute
N/A
9,069

Analysis: NVIDIA GeForce GTX 1060 5 GB vs NVIDIA Quadro GV100

# Head-to-Head Benchmarks

The data presents a starkly one-sided picture. In the two shared benchmark tests, the NVIDIA Quadro GV100 dominates the GeForce GTX 1060 5 GB by margins that are almost difficult to process. In Geekbench OpenCL, the Quadro GV100 scores 150,004 against the GTX 1060's 33,397 — a delta of 349.2% in favor of the professional card. The Vulkan results tell a similar story: 139,526 for the GV100 versus 33,991 for the GTX 1060, a 310.5% advantage.

To put those numbers in context, the GV100's average benchmark score of 35,520 places it at the 80th percentile of all GPUs, while the GTX 1060's average of 33,694 sits at the 78th percentile. Yet when tested directly against each other, the gap is enormous. This is a case where aggregate percentile rankings obscure the sheer scale of the performance cliff between these two parts. The GV100 is not merely faster; it is operating in a different performance stratum entirely.

The delta percentages are worth dwelling on. A 349.2% lead in OpenCL means the GV100 delivers roughly four and a half times the compute throughput of the GTX 1060 in that workload. The Vulkan delta of 310.5% is similarly lopsided. These are not incremental gains; they represent a generational and architectural chasm. Interestingly, the GV100's nearest rivals — the RTX 5070 Ti Mobile at 35,435 (0.2% delta), the AMD Radeon Pro Duo at 35,860 (-0.9%), and the NVIDIA T1000 at 36,289 (-2.1%) — all cluster within a few percentage points of its average score. Yet none of those rivals appear in the head-to-head tests here. The GTX 1060, by contrast, sits near the AMD Radeon RX 480 (33,997, -0.9% delta) and the AMD Radeon HD 7950 (33,951, -0.8%), which suggests it is competing with older or lower-tier hardware in its own league.

The GV100's raw compute advantages are visible in its specification sheet: 5,120 shading units versus 1,280, 320 TMUs versus 80, and 128 ROPs versus 40. The FP32 throughput of 16.66 TFLOPS versus 4.375 TFLOPS is a 3.8x gap that tracks closely with the OpenCL benchmark delta. The pixel rate of 208.3 GPixel/s versus 68.36 GPixel/s and texture rate of 520.6 GTexel/s versus 136.7 GTexel/s reinforce the same conclusion: across every measurable dimension of rasterization and compute, the GV100 holds a commanding lead.

# FAQ

Q: How much faster is the Quadro GV100 in OpenCL compute than the GTX 1060 5 GB?

A: The GV100 scores 150,004 in Geekbench OpenCL against the GTX 1060's 33,397, representing a 349.2% higher score. This means the GV100 delivers well over four times the OpenCL compute performance of the GTX 1060.

Q: Does the GTX 1060 win any benchmark against the GV100?

A: No. In the two head-to-head tests available — Geekbench OpenCL and Geekbench Vulkan — the GV100 wins both. The wins tally is 2 for the GV100 and 0 for the GTX 1060, with no benchmark in the dataset where the GTX 1060 outperforms the GV100.

Q: How do these two cards rank among all GPUs?

A: The GV100 sits at the 80th percentile of all GPUs with an average benchmark score of 35,520, while the GTX 1060 ranks at the 78th percentile with an average score of 33,694. Despite the closeness of those percentile positions, their direct benchmark results diverge massively.

Q: What memory configuration does each card use?

A: The GV100 uses 32 GB of HBM2 memory on a 4096-bit bus, delivering 868.4 GB/s of bandwidth. The GTX 1060 uses 5 GB of GDDR5 memory on a 160-bit bus, providing 160.2 GB/s. The GV100's memory bandwidth is over five times higher.

Q: Is the GTX 1060 closer in performance to its own rivals than the GV100 is to its rivals?

A: The GTX 1060's nearest rival, the NVIDIA RTX A5000, has an average score of 33,622, a 0.2% delta from the GTX 1060's 33,694. The GV100's closest rival, the RTX 5070 Ti Mobile, scores 35,435, also a 0.2% delta from the GV100's 35,520. Both cards are tightly clustered with their respective peer groups.

Q: Which card has higher FP16 performance?

A: The GV100 delivers 33.32 TFLOPS FP16 at a 2:1 ratio relative to its FP32 throughput. The GTX 1060 offers 68.36 GFLOPS FP16 at a 1:64 ratio, which is dramatically lower — a difference of nearly 500 times in FP16 compute capability.

# The Verdict

The data is unambiguous: the NVIDIA Quadro GV100 is the superior performer by every metric in the FACT PACK. It wins both head-to-head benchmarks with deltas of 349.2% and 310.5%, holds a 3.8x advantage in FP32 throughput, and offers 6.4x the memory capacity with 5.4x the bandwidth. The GTX 1060 5 GB cannot compete on raw performance, and no benchmark in the dataset suggests otherwise.

For compute-heavy workloads — OpenCL and Vulkan tasks that stress parallel throughput — the GV100 is the only rational choice between these two. Its 5,120 shading units, 640 tensor cores, and 16.66 TFLOPS FP32 make it a serious compute instrument. The GTX 1060's 1,280 shading units and 4.375 TFLOPS place it in a fundamentally different performance class.

However, the GTX 1060 is not without its own logic. Its 120 W TDP versus the GV100's 250 W means it draws less than half the power. Its 300 W suggested PSU versus 600 W reflects a far lighter system demand. And its launch date of December 2017 predates the GV100's March 2018 release, making it an older but more accessible design. For users who prioritize power efficiency and system simplicity over compute muscle, the GTX 1060 has a practical appeal.

The verdict splits cleanly: choose the GV100 for maximum compute performance, professional-grade memory bandwidth, and the ability to handle massive datasets in its 32 GB frame buffer. Choose the GTX 1060 for lower power draw, a simpler power connector requirement (1x 6-pin versus 1x 8-pin), and a significantly smaller silicon footprint (200 mm² versus 815 mm²). The GV100 is the performance king; the GTX 1060 is the efficiency-focused alternative.

# Specification Differences

The two cards diverge on nearly every specification field. The GV100 uses a 12 nm process node from TSMC with 21,100 million transistors on an 815 mm² die, while the GTX 1060 uses a 16 nm node with 4,400 million transistors on a 200 mm² die. Transistor density is 25.9M per mm² for the GV100 versus 22.0M for the GTX 1060.

Clock speeds tell a nuanced story: the GTX 1060 has a higher base clock at 1506 MHz versus 1132 MHz, and a higher boost clock at 1709 MHz versus 1627 MHz. Yet the GV100 still vastly outperforms it due to its larger execution resources. Memory clocks are similarly inverted: the GTX 1060 runs at 2002 MHz (8 Gbps effective) while the GV100 runs at 848 MHz (1696 Mbps effective), but the GV100's HBM2 memory on a 4096-bit bus utterly eclipses the GTX 1060's GDDR5 on a 160-bit bus.

Memory capacity differs by 27 GB: 32 GB versus 5 GB. Bandwidth differs by 708.2 GB/s: 868.4 GB/s versus 160.2 GB/s. The GV100 has 640 tensor cores; the GTX 1060 has none. FP16 performance is 33.32 TFLOPS versus 68.36 GFLOPS — a 2:1 ratio versus a 1:64 ratio. Power connectors are 1x 8-pin versus 1x 6-pin. Display outputs are 4x DisplayPort 1.4a versus 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a. Physical dimensions: 267 mm versus 250 mm in length. The GV100's launch MSRP was 8,999 USD; the GTX 1060 has no launch MSRP listed.

# Architecture Differences

The GV100 is built on NVIDIA's Volta architecture, while the GTX 1060 uses the older Pascal architecture. This is not merely a node shrink; it represents a fundamental design philosophy shift. Volta introduces tensor cores — 640 of them on the GV100 — which are dedicated matrix math units absent entirely from the Pascal-based GTX 1060. This explains the GV100's massive FP16 advantage: 33.32 TFLOPS at 2:1 ratio versus 68.36 GFLOPS at 1:64 on the GTX 1060.

The chip designs are radically different in scale. The GV100 chip measures 815 mm² and houses 21,100 million transistors, making it a monolithic giant. The GTX 1060's GP106 chip is 200 mm² with 4,400 million transistors — a quarter of the die area and roughly one-fifth the transistor count. The transistor density difference (25.9M/mm² versus 22.0M/mm²) shows the 12 nm process is slightly denser than 16 nm, but the real story is the sheer size disparity.

Memory architecture also diverges completely. The GV100 uses HBM2 with a 4096-bit bus, a design choice that prioritizes bandwidth above all else. The GTX 1060 uses GDDR5 with a 160-bit bus, a more conventional and cost-effective approach. The GV100's 868.4 GB/s bandwidth versus the GTX 1060's 160.2 GB/s is a direct consequence of this architectural decision. The GV100's 267 mm length and dual-slot width suggest a large, power-hungry board design; the GTX 1060's 250 mm length with a 120 W TDP reflects a more modest footprint.

The generation naming also differs: the GV100 belongs to the "Quadro Volta (Vx000)" generation, while the GTX 1060 is part of the "GeForce 10" series. Their predecessors and successors underscore their divergent trajectories: the GV100 follows Quadro Pascal and leads to Quadro Turing, while the GTX 1060 follows GeForce 900 and leads to GeForce 20. Both are end-of-life products, but they represent entirely different product lineages within NVIDIA's portfolio.

# Where Each One Wins

The GV100 wins decisively in compute-heavy workloads. Its OpenCL score of 150,004 versus 33,397 and Vulkan score of 139,526 versus 33,991 make it the clear choice for general-purpose GPU computing, scientific simulation, and any task that leverages FP32 or FP16 throughput. The 640 tensor cores give it a unique advantage in machine learning inference and training workloads that the GTX 1060 simply cannot touch. The 32 GB HBM2 frame buffer with 868.4 GB/s bandwidth makes it suitable for large datasets, high-resolution textures, and memory-intensive rendering tasks that would exhaust the GTX 1060's 5 GB allocation.

The GTX 1060 wins in efficiency-oriented scenarios. Its 120 W TDP versus 250 W means lower system power requirements, and its 300 W suggested PSU versus 600 W opens up compatibility with smaller power supplies. The 1x 6-pin connector is more universally supported than the GV100's 1x 8-pin. Its higher base and boost clocks (1506 MHz and 1709 MHz versus 1132 MHz and 1627 MHz) suggest it can hit its performance ceiling quickly without the same thermal management overhead. For users with modest power budgets or compact builds, the GTX 1060's 250 mm length and lower power draw make it the more practical option.

The benchmark data shows the GV100 winning 2 out of 2 head-to-head tests. There is no test in the FACT PACK where the GTX 1060 emerges victorious. However, the GTX 1060's 78th percentile ranking versus the GV100's 80th percentile — a mere 2 percentage points apart — indicates that in the broader GPU landscape, these cards are not as far apart as their direct comparison suggests. The GTX 1060's nearest rivals (RTX A5000, RX 7700S, HD 7950, RX 480) are all within 0.9% of its average score, while the GV100's rivals (RTX 5070 Ti Mobile, Radeon Pro Duo, T1000, A2) span a 4.5% range. This suggests the GTX 1060 occupies a tightly competitive segment, while the GV100 sits in a sparser, more premium tier.

For users who need maximum compute density, the GV100 is the only choice. For users who prioritize lower power draw, simpler connectivity, and adequate performance for lighter workloads, the GTX 1060 has a defensible position. The data does not equivocate on performance — it only asks what your priorities are.

DETAILED SPECIFICATIONS

SPECIFICATION
GTX 1060 5 GB
Quadro GV100
Core Specs
Shading Units
1,280
5,120 +300.0%
Shaders
1,280
5,120 +300.0%
TMUs
80
320 +300.0%
ROPs
40
128 +220.0%
SM Count
10
80 +700.0%
Clocks
Base Clock
1506 MHz
1132 MHz
Boost Clock
1709 MHz
1627 MHz
Memory Clock
2002 MHz 8 Gbps effective
848 MHz 1696 Mbps effective
Memory
Memory Size
5 GB
32 GB
VRAM (MB)
5,120
32,768 +540.0%
Memory Type
GDDR5
HBM2
Memory Bus
160 bit
4096 bit
Bandwidth
160.2 GB/s
868.4 GB/s
Cache
L1 Cache
48 KB (per SM)
128 KB (per SM)
L2 Cache
1280 KB
6 MB
Performance
Pixel Rate
68.36 GPixel/s
208.3 GPixel/s
Texture Rate
136.7 GTexel/s
520.6 GTexel/s
FP32 (TFLOPS)
4.375 TFLOPS
16.66 TFLOPS
FP64 (TFLOPS)
136.7 GFLOPS (1:32)
8.330 TFLOPS (1:2)
FP16 (TFLOPS)
68.36 GFLOPS (1:64)
33.32 TFLOPS (2:1)
AI/RT
Tensor Cores
—
640
Power
TDP
120 W
250 W
TDP (W)
120
250 +108.3%
Suggested PSU
300 W
600 W
Power Connectors
1x 6-pin
1x 8-pin
Architecture
Architecture
Pascal
Volta
GPU Name
GP106
GV100
Generation
GeForce 10
Quadro Volta (Vx000)
Process Size
16 nm
12 nm
Transistors
4,400 million
21,100 million
Die Size
200 mm²
815 mm²
Foundry
TSMC
TSMC
Density
22.0M / mm²
25.9M / mm²
API Support
DirectX
12 (12_1)
12 (12_1)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
6.1
7.0
Shader Model
6.8
6.8
Physical
Slot Width
Dual-slot
Dual-slot
Length
250 mm 9.8 inches
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x DVI1x HDMI 2.03x DisplayPort 1.4a
4x DisplayPort 1.4a
Bus Interface
PCIe 3.0 x16
PCIe 3.0 x16
Other
Launch Price
—
8,999 USD
Production
End-of-life
End-of-life
Predecessor
GeForce 900
Quadro Pascal
Successor
GeForce 20
Quadro Turing
View GeForce GTX 1060 5 GB Details View Quadro GV100 Details