NVIDIA GeForce GTX 1060 3 GB vs NVIDIA RTX 2000 Ada Generation Comparison
NVIDIA GeForce GTX 1060 3 GB
RTX 2000 Ada Generation
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1060 3 GB vs NVIDIA RTX 2000 Ada Generation
NVIDIA’s GeForce GTX 1060 3 GB and RTX 2000 Ada Generation occupy different corners of the GPU landscape, separated by nearly eight years of architecture evolution. The benchmark data shows a clear generational gulf, yet the GTX 1060 remains a relevant baseline for comparison. The RTX 2000 Ada wins every head-to-head test, but the margin of victory varies dramatically by workload, and the GTX 1060’s aggregate scores remain surprisingly competitive against its own peers.
Where Each One Wins
The data splits cleanly along workload boundaries. The RTX 2000 Ada Generation dominates compute-oriented APIs, delivering a 2.9x advantage in Geekbench OpenCL (78,074 vs 27,001) and a 4.8x advantage in Geekbench Vulkan (83,360 vs 17,475). These are not marginal improvements; they represent a fundamental shift in processing capability. The GTX 1060 3 GB has no counter-victory in any shared benchmark, as the head-to-head table shows 0 wins for the Pascal card and 2 wins for the Ada card.
However, the GTX 1060’s average benchmark score of 19,334 sits nearly level with the RTX 2000 Ada’s 18,954, a difference of only 2.0% in favor of the older card. This apparent contradiction stems from the different benchmark suites each card was tested with. The GTX 1060’s average pulls from Geekbench Metal, OpenCL, and Vulkan results (13,527, 27,001, and 17,475 respectively), while the RTX 2000 Ada’s average includes a much wider spread including PassMark tests, where its DirectX 9 score of 216 and G2D score of 1,072 drag down the aggregate. The lesson: the RTX 2000 Ada wins where modern APIs and compute matter, while the GTX 1060’s legacy profile looks better in a mixed bag of older tests.
For gaming-style workloads, the RTX 2000 Ada’s PassMark DirectX 12 score of 71 is its lowest DirectX result, while DirectX 11 (138) and DirectX 9 (216) fare better. The GTX 1060 has no comparable PassMark data in the fact pack, so direct gaming comparisons are limited to the Geekbench pair. There, the RTX 2000 Ada’s Vulkan lead of 79% is the single largest margin in any test, suggesting the Ada card is exceptionally well-suited to modern, low-overhead graphics APIs.
Architecture Differences
The two GPUs embody opposite design philosophies from different eras. The GTX 1060 uses the GP106 chip on TSMC’s 16 nm process, packing 4,400 million transistors into a 200 mm² die for a density of 22.0M / mm². The RTX 2000 Ada uses the AD107 chip on TSMC’s 5 nm process, with 18,900 million transistors squeezed into a smaller 159 mm² die, achieving a density of 118.9M / mm² — more than five times the transistor density of the Pascal part.
Architecturally, the GTX 1060 is pure Pascal: 1,152 shading units, 72 texture mapping units, and 48 ROPs. It has no ray tracing cores and no tensor cores. The RTX 2000 Ada brings Ada Lovelace features including 22 RT cores and 88 tensor cores, alongside 2,816 shading units and 88 TMUs. ROP count remains the same at 48, but the Ada card’s pixel rate of 102.2 GPixel/s versus 81.98 GPixel/s shows the newer architecture extracts more from identical ROP hardware. Texture rate tells a similar story: 187.4 GTexel/s versus 123.0 GTexel/s.
The memory subsystems differ drastically. The GTX 1060 ships with 3 GB of GDDR5 on a 192-bit bus, delivering 192.2 GB/s of bandwidth. The RTX 2000 Ada has 16 GB of GDDR6 on a narrower 128-bit bus, yet achieves 256.0 GB/s — a 33.2% bandwidth advantage. Clock speeds also favor the newer card: the GTX 1060 boosts to 1,708 MHz, while the RTX 2000 Ada boosts to 2,130 MHz. The Ada card’s FP32 throughput of 12.00 TFLOPS is 3.05x the GTX 1060’s 3.935 TFLOPS, and its FP16 rate of 12.00 TFLOPS (1:1) dwarfs the GTX 1060’s 61.49 GFLOPS (1:64), which is a negligible FP16 implementation.
Power and physical design diverge sharply. The RTX 2000 Ada draws 70 W TDP with no power connectors, while the GTX 1060 draws 120 W and requires a single 6-pin connector. The Ada card is shorter at 168 mm versus 250 mm, and narrower at 69 mm height. Both are dual-slot. The RTX 2000 Ada uses PCIe 4.0 x8, while the GTX 1060 uses PCIe 3.0 x16. Display outputs also differ: the GTX 1060 offers 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a, while the RTX 2000 Ada provides 4x mini-DisplayPort 1.4a. API support favors Ada with DirectX 12 Ultimate (12_2) versus the GTX 1060’s DirectX 12 (12_1).
Head-to-Head Benchmarks
The shared benchmark data consists of only two tests, but the results are unambiguous. In Geekbench OpenCL, the RTX 2000 Ada scores 78,074 against the GTX 1060’s 27,001, a delta of -65.4% from the Ada card’s perspective (meaning the GTX 1060 trails by that margin). This 51,073-point gap translates to a 2.89x performance ratio. OpenCL stress-tests raw compute throughput, and the Ada card’s 2,816 shading units, 12.00 TFLOPS FP32, and 256.0 GB/s bandwidth make the result predictable.
The Geekbench Vulkan result is even more lopsided. The RTX 2000 Ada scores 83,360 versus 17,475 for the GTX 1060, a delta of -79%. This 65,885-point gap is a 4.77x ratio. Vulkan’s low-level nature rewards architectural efficiency, and Ada Lovelace’s dedicated RT and tensor cores, combined with its 5 nm process, provide a massive advantage over Pascal’s older design. Notably, the RTX 2000 Ada’s Vulkan score is 6.8% higher than its OpenCL score, while the GTX 1060’s Vulkan score is 35.3% lower than its OpenCL score — indicating Pascal’s Vulkan driver or hardware implementation is comparatively weaker.
These two wins give the RTX 2000 Ada a perfect 2-0 record in direct comparisons. The GTX 1060’s best relative showing is in OpenCL, where it still loses by a wide margin but at least demonstrates its FP32 capability is not obsolete. The Vulkan gap suggests that any modern API workload will heavily favor the Ada card, while legacy compute may narrow the difference slightly.
The Verdict
From the data, the RTX 2000 Ada Generation is the superior card for any modern workload. Its 12.00 TFLOPS FP32, 16 GB GDDR6 memory, RT and tensor cores, and 5 nm efficiency make it the clear choice for compute, rendering, or API-heavy tasks. The 79% Vulkan lead and 65.4% OpenCL lead leave no ambiguity. The GTX 1060 3 GB remains an end-of-life product whose 3 GB memory and 192.2 GB/s bandwidth were adequate for its 2016 era but are now limiting factors.
However, the GTX 1060’s aggregate benchmark score of 19,334 slightly exceeds the RTX 2000 Ada’s 18,954, and its percentile rank of 64 versus 63 shows they sit in the same overall performance tier. This means the GTX 1060 is not obsolete in every sense — in older, less demanding workloads, it can still hold its own. The RTX 2000 Ada’s average is dragged down by low PassMark DirectX scores (71 in DX12, 82 in DX10), which may reflect driver optimization or workload characteristics rather than raw capability.
Who should pick which? The data supports the RTX 2000 Ada for anyone running Vulkan or OpenCL applications, modern DirectX 12 Ultimate titles, or any workload that can utilize its RT and tensor cores. Its 70 W TDP and lack of power connectors also make it suitable for compact or power-constrained systems. The GTX 1060 3 GB is a viable choice only for legacy applications that predate modern APIs, or as a budget placeholder — though its 3 GB memory and 120 W TDP limit its future utility. The RTX 2000 Ada’s 16 GB memory alone justifies its selection for memory-intensive tasks.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The NVIDIA GeForce GTX 1060 3 GB has an average benchmark score of 19,334, while the NVIDIA RTX 2000 Ada Generation scores 18,954 — a 2.0% advantage for the GTX 1060.
Q: How much faster is the RTX 2000 Ada in Geekbench Vulkan?
A: The RTX 2000 Ada scores 83,360 versus the GTX 1060’s 17,475, a delta of -79%, meaning the GTX 1060 trails by 79% or the Ada card is 4.77x faster.
Q: Do both cards have the same number of ROPs?
A: Yes, both the GTX 1060 3 GB and RTX 2000 Ada Generation have 48 ROPs, though the Ada card achieves a higher pixel rate of 102.2 GPixel/s versus 81.98 GPixel/s.
Q: What memory capacity does each card offer?
A: The GTX 1060 3 GB has 3 GB of GDDR5 on a 192-bit bus with 192.2 GB/s bandwidth, while the RTX 2000 Ada has 16 GB of GDDR6 on a 128-bit bus with 256.0 GB/s bandwidth.
Q: Which card has ray tracing and tensor cores?
A: Only the RTX 2000 Ada Generation has them, with 22 RT cores and 88 tensor cores. The GTX 1060 has no such hardware.
Q: What is the power draw difference?
A: The RTX 2000 Ada has a 70 W TDP with no power connectors, while the GTX 1060 has a 120 W TDP and requires a single 6-pin connector.
Specification Differences
| Specification | GTX 1060 3 GB | RTX 2000 Ada Generation |
|---|---|---|
| Architecture | Pascal | Ada Lovelace |
| Process Node | 16 nm | 5 nm |
| Transistors | 4,400 million | 18,900 million |
| Die Size | 200 mm² | 159 mm² |
| Transistor Density | 22.0M / mm² | 118.9M / mm² |
| Base Clock | 1506 MHz | 1620 MHz |
| Boost Clock | 1708 MHz | 2130 MHz |
| Memory Size | 3 GB | 16 GB |
| Memory Type | GDDR5 | GDDR6 |
| Memory Bus | 192 bit | 128 bit |
| Memory Bandwidth | 192.2 GB/s | 256.0 GB/s |
| Shading Units | 1152 | 2816 |
| TMUs | 72 | 88 |
| RT Cores | None | 22 |
| Tensor Cores | None | 88 |
| Pixel Rate | 81.98 GPixel/s | 102.2 GPixel/s |
| Texture Rate | 123.0 GTexel/s | 187.4 GTexel/s |
| FP32 | 3.935 TFLOPS | 12.00 TFLOPS |
| FP16 | 61.49 GFLOPS (1:64) | 12.00 TFLOPS (1:1) |
| TDP | 120 W | 70 W |
| Power Connectors | 1x 6-pin | None |
| Suggested PSU | 300 W | 250 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x8 |
| Display Outputs | 1x DVI, 1x HDMI 2.0, 3x DisplayPort 1.4a | 4x mini-DisplayPort 1.4a |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Length | 250 mm (9.8 inches) | 168 mm (6.6 inches) |
| Height | Not specified | 69 mm (2.7 inches) |
| Production Status | End-of-life | Active |
| Release Date | 2016-08-17 | 2024-02-11 |
| Launch MSRP | 199 USD | 649 USD |