NVIDIA GeForce GTX 1060 3 GB vs NVIDIA GeForce RTX 5050 Comparison
NVIDIA GeForce GTX 1060 3 GB
GeForce RTX 5050
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GTX 1060 3 GB vs NVIDIA GeForce RTX 5050
The NVIDIA GeForce RTX 5050 and the NVIDIA GeForce GTX 1060 3 GB represent two distinct eras of NVIDIA's GPU lineup, separated by nearly a decade of architectural evolution. The benchmark data available for direct comparison shows a decisive performance shift, with the RTX 5050 leading in every shared test. The Geekbench OpenCL results show the RTX 5050 scoring 90,334 against the GTX 1060 3 GB's 27,001, a 234.6% advantage. The gap widens further in the Geekbench Vulkan test, where the RTX 5050 achieves 89,381 points versus 17,475 for the GTX 1060 3 GB, representing a 411.5% delta. These figures establish the RTX 5050 as the clear performance leader in the head-to-head data, but the full picture requires examining the architectural and specification differences that drive this outcome.
Head-to-Head Benchmarks
The direct comparison between these two cards is limited to two benchmark tests, but both tell a consistent story of substantial generational improvement. In Geekbench OpenCL, the RTX 5050 posts a score of 90,334, which is 234.6% higher than the GTX 1060 3 GB's 27,001. This is not a marginal gain; the RTX 5050 more than triples the older card's compute throughput in this API. The result reflects the massive increase in raw shading power, with the RTX 5050's FP32 performance rated at 13.17 TFLOPS compared to the GTX 1060 3 GB's 3.935 TFLOPS. The 2560 shading units of the RTX 5050 dwarf the 1152 units in the GTX 1060 3 GB, and this architectural advantage translates directly into the observed benchmark delta.
The Vulkan test shows an even more pronounced separation. The RTX 5050 scores 89,381, while the GTX 1060 3 GB manages only 17,475, yielding a 411.5% delta in favor of the newer card. Vulkan is a low-level API that benefits from modern hardware features and efficient driver overhead, and the Blackwell 2.0 architecture of the RTX 5050 clearly exploits this better than the Pascal-based GTX 1060 3 GB. The RTX 5050's support for Vulkan 1.4, matching the GTX 1060 3 GB's API version, does not explain the gap; instead, the difference lies in the underlying compute resources and memory subsystem. The RTX 5050's 320.0 GB/s memory bandwidth is 66.5% higher than the GTX 1060 3 GB's 192.2 GB/s, which helps feed the faster shader array.
Overall, the head-to-head data shows 2 wins for the RTX 5050 and 0 for the GTX 1060 3 GB. The average benchmark score for the RTX 5050 is 21,035, placing it in the 66th percentile of all GPUs, while the GTX 1060 3 GB averages 19,334 and sits in the 64th percentile. Despite the massive per-test deltas, the overall percentile difference is narrow because the average score includes other benchmarks beyond the two shared tests. The RTX 5050's nearest rivals include the AMD Radeon RX 5600 XT (1.6% slower), the AMD Radeon RX Vega M GL (0.6% slower), and the NVIDIA RTX A4000 Mobile (1.6% faster). The GTX 1060 3 GB's nearest rivals include the NVIDIA TITAN Xp (0.8% faster) and the AMD Radeon RX 7900 XTX (0.4% slower), showing that the older card still competes with much newer hardware in aggregate scoring.
FAQ
Q: How much faster is the RTX 5050 in OpenCL compute workloads?
A: The RTX 5050 scores 90,334 in Geekbench OpenCL, which is 234.6% higher than the GTX 1060 3 GB's score of 27,001. This means the RTX 5050 delivers more than triple the OpenCL performance of the older card.
Q: What is the largest performance gap between the two cards?
A: The largest gap appears in Geekbench Vulkan, where the RTX 5050's 89,381 score is 411.5% higher than the GTX 1060 3 GB's 17,475. This indicates a more than fivefold performance advantage in this specific API.
Q: Do both cards support the same DirectX version?
A: No. The RTX 5050 supports DirectX 12 Ultimate (12_2), while the GTX 1060 3 GB supports DirectX 12 (12_1). The RTX 5050's higher feature level allows for newer rendering techniques that the GTX 1060 3 GB cannot utilize.
Q: Which card has a higher memory bandwidth?
A: The RTX 5050 has a memory bandwidth of 320.0 GB/s, compared to the GTX 1060 3 GB's 192.2 GB/s. This represents a 66.5% increase in bandwidth for the newer card.
Q: How do the two cards compare in average benchmark score?
A: The RTX 5050 has an average benchmark score of 21,035, while the GTX 1060 3 GB averages 19,334. The RTX 5050 is 8.8% higher in aggregate performance across all recorded benchmarks.
Q: Is the GTX 1060 3 GB still competitive in any benchmark category?
A: In the shared head-to-head tests, the GTX 1060 3 GB does not win any category. However, its average benchmark score of 19,334 places it in the 64th percentile of all GPUs, showing it remains viable relative to the broader GPU landscape, though not against the RTX 5050.
Architecture Differences
The architectural gap between these two GPUs is foundational to their performance discrepancy. The RTX 5050 uses the GB207 chip built on the Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. The GTX 1060 3 GB uses the GP106 chip on the Pascal architecture, fabricated on a 16 nm process, also at TSMC. The process node difference alone—5 nm versus 16 nm—allows the RTX 5050 to pack 16,900 million transistors into a 149 mm² die, resulting in a transistor density of 113.4 million per mm². The GTX 1060 3 GB contains 4,400 million transistors on a 200 mm² die, yielding 22.0 million per mm². This fivefold density advantage enables the RTX 5050 to house significantly more compute units in a smaller physical area.
The RTX 5050 features 2560 shading units, 80 texture mapping units (TMUs), and 32 raster operation units (ROPs). The GTX 1060 3 GB has 1152 shading units, 72 TMUs, and 48 ROPs. While the RTX 5050 has more than double the shaders and slightly more TMUs, the GTX 1060 3 GB actually has 50% more ROPs. This affects pixel fill rates: the RTX 5050 achieves 82.30 GPixel/s versus the GTX 1060 3 GB's 81.98 GPixel/s, a negligible 0.4% difference. The texture fill rate tells a different story, with the RTX 5050 hitting 205.8 GTexel/s against the GTX 1060 3 GB's 123.0 GTexel/s, a 67.3% advantage.
The most significant architectural additions to the RTX 5050 are ray tracing cores and tensor cores, which are completely absent from the GTX 1060 3 GB. The RTX 5050 includes 20 RT cores and 80 tensor cores, enabling hardware-accelerated ray tracing and AI-based features that the Pascal architecture cannot perform. The FP16 compute rates also diverge sharply: the RTX 5050 delivers 13.17 TFLOPS with a 1:1 ratio to FP32, while the GTX 1060 3 GB manages only 61.49 GFLOPS at a 1:64 ratio. This makes the RTX 5050 vastly more capable for workloads that leverage half-precision arithmetic.
Specification Differences
The two cards differ across nearly every specification field. The memory subsystem shows a 5 GB capacity gap, with the RTX 5050 offering 8 GB of GDDR6 memory on a 128-bit bus, while the GTX 1060 3 GB has 3 GB of GDDR5 on a 192-bit bus. Despite the narrower bus, the RTX 5050 achieves higher bandwidth at 320.0 GB/s versus 192.2 GB/s, thanks to faster memory clocks of 2500 MHz (20 Gbps effective) compared to 2002 MHz (8 Gbps effective) on the GTX 1060 3 GB. The RTX 5050's memory type is GDDR6, while the GTX 1060 3 GB uses GDDR5, contributing to the bandwidth differential.
Clock speeds favor the RTX 5050, with a base clock of 2317 MHz and boost clock of 2572 MHz, versus the GTX 1060 3 GB's 1506 MHz base and 1708 MHz boost. The RTX 5050 runs at a 53.8% higher base clock and a 50.6% higher boost clock. Power consumption is similar, with the RTX 5050 rated at 130 W TDP and the GTX 1060 3 GB at 120 W TDP, a 10 W difference. Both use a dual-slot cooler, but the RTX 5050 requires a single 8-pin power connector while the GTX 1060 3 GB uses a single 6-pin. The suggested PSU is identical at 300 W for both cards.
The bus interface differs: the RTX 5050 uses PCIe 5.0 x8, while the GTX 1060 3 GB uses PCIe 3.0 x16. Display outputs also vary, with the RTX 5050 offering 1x HDMI 2.1b and 3x DisplayPort 2.1b, while the GTX 1060 3 GB provides 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a. The RTX 5050 is 250 mm long, while the GTX 1060 3 GB's length is not specified in the data. Production status differs as well, with the RTX 5050 marked as Active and the GTX 1060 3 GB as End-of-life.
Where Each One Wins
The RTX 5050 wins decisively in all shared benchmark tests, but its strengths extend beyond raw scores. Its 8 GB memory capacity provides twice the headroom of the GTX 1060 3 GB's 3 GB, which is critical for modern workloads that exceed the older card's frame buffer. The RTX 5050's 20 RT cores and 80 tensor cores open capabilities the GTX 1060 3 GB cannot access, including hardware ray tracing and tensor-accelerated operations. The 1:1 FP16 ratio of 13.17 TFLOPS makes it suitable for compute tasks that use half precision, while the GTX 1060 3 GB's 61.49 GFLOPS FP16 at a 1:64 ratio is effectively negligible for such workloads.
The GTX 1060 3 GB's wins are more subtle and relate to specific hardware characteristics rather than benchmark victories. Its 48 ROPs, compared to the RTX 5050's 32, give it a slight pixel fill rate advantage when normalized for clock differences, though the actual rates are nearly identical. Its 192-bit memory bus is wider than the RTX 5050's 128-bit, though the faster GDDR6 memory on the newer card overcomes this in bandwidth. The GTX 1060 3 GB also has a lower TDP of 120 W versus 130 W, a 10 W difference that is minimal in practice. The PCIe 3.0 x16 interface on the GTX 1060 3 GB provides more lanes than the RTX 5050's PCIe 5.0 x8, but the newer standard's higher bandwidth per lane makes this moot.
In terms of percentile ranking, the RTX 5050 sits at the 66th percentile of all GPUs, while the GTX 1060 3 GB is at the 64th. This 2-percentile difference is small, but the RTX 5050's average benchmark score of 21,035 is 8.8% higher than the GTX 1060 3 GB's 19,334. The RTX 5050's nearest rivals include the AMD Radeon RX 5600 XT, which is 1.6% slower, and the NVIDIA RTX A4000 Mobile, which is 1.6% faster. The GTX 1060 3 GB's nearest rivals include the NVIDIA TITAN Xp, which is 0.8% faster, and the AMD Radeon RX 7900 XTX, which is 0.4% slower, indicating that the GTX 1060 3 GB still holds its own against much newer high-end cards in aggregate scoring.
The Verdict
The data points to a clear verdict: the RTX 5050 is the superior GPU for virtually every use case where performance matters. Its 234.6% advantage in OpenCL and 411.5% advantage in Vulkan over the GTX 1060 3 GB are not incremental improvements; they represent a generational leap in compute capability. The RTX 5050's 8 GB memory, 2560 shading units, and 13.17 TFLOPS of FP32 performance place it in a different class than the GTX 1060 3 GB's 3 GB memory, 1152 shading units, and 3.935 TFLOPS. The addition of RT cores and tensor cores further separates the two, enabling features that the GTX 1060 3 GB cannot support at all.
Users who prioritize raw compute performance, modern API support, or ray tracing capabilities should choose the RTX 5050 without hesitation. Its higher average benchmark score of 21,035 versus 19,334, combined with its Active production status, makes it the relevant choice for current and future workloads. The GTX 1060 3 GB, marked as End-of-life, remains a functional card for legacy applications, but its 3 GB memory capacity and lack of RT and tensor cores limit its usefulness for anything beyond older titles or basic tasks. The 10 W TDP difference is negligible, and the GTX 1060 3 GB's lower power draw does not compensate for its massive performance deficit. In short, the RTX 5050 wins on every measurable benchmark, and the GTX 1060 3 GB's only advantages are its lower launch MSRP of 199 USD versus 249 USD and its wider 192-bit memory bus, which fails to translate into real-world bandwidth superiority. For any user facing this comparison, the RTX 5050 is the data-backed choice.