NVIDIA GeForce GT 1030 vs NVIDIA GeForce GTX 860M Comparison
NVIDIA GeForce GT 1030
GeForce GTX 860M
PERFORMANCE BENCHMARKS
Analysis: NVIDIA GeForce GT 1030 vs NVIDIA GeForce GTX 860M
The benchmark data clearly separates these two NVIDIA GPUs: the GeForce GTX 860M wins 9 of 10 head-to-head tests, while the GeForce GT 1030 takes a single victory. The GTX 860M's average benchmark score of 2967 sits 11.5% above the GT 1030's 2662 average, placing the older mobile part in the 19th percentile of all GPUs versus the GT 1030's 17th percentile. However, the GT 1030 counters with a 48.8% blowout in 2D graphics performance, a category where the aging Kepler architecture falls far behind.
Head-to-Head Benchmarks
The GTX 860M dominates in raw compute workloads. In Geekbench OpenCL, the 860M scores 10461 against the GT 1030's 8568, a decisive 22.1% advantage. This gap reflects the 860M's 2.108 TFLOPS of FP32 throughput versus the GT 1030's 1,127.4 GFLOPS — nearly double the raw floating-point capability. The Vulkan results tighten somewhat, with the 860M leading 9648 to 9229 (4.5% ahead), but the Metal test shows a 5.7% edge (4900 vs 4637) in favor of the older card.
DirectX legacy tests tell an even more lopsided story. The 860M wins DirectX 10 by 66.7% (15 vs 9), DirectX 11 by 35.3% (23 vs 17), and DirectX 9 by 52.8% (55 vs 36). The two cards tie exactly in DirectX 12 at 13 points apiece, showing that the GT 1030's newer Pascal architecture can match the 860M when modern APIs level the playing field. The overall 3D performance benchmark reinforces this trend: the 860M posts 3081 in PassMark G3D versus 2417 for the GT 1030, a 27.5% margin.
Compute parity emerges in PassMark GPU Compute, where the 860M's 1251 score edges out the GT 1030's 1250 by a razor-thin 0.1%. This near-identical result suggests that for general-purpose compute tasks, the architectural advantages of each card roughly cancel out. The GT 1030's sole victory comes in PassMark G2D, where it scores 441 against the 860M's 226 — a 48.8% deficit for the Kepler part. This 2D performance gap is the largest delta in either direction across all tests.
Architecture Differences
The two GPUs represent distinct architectural generations and manufacturing approaches. The GTX 860M uses the GK104 chip on a 28 nm TSMC process, packing 3,540 million transistors into a 294 mm² die with a transistor density of 12.0M per mm². The GT 1030 employs the GP108 chip built on Samsung's 14 nm node, fitting 1,800 million transistors into just 74 mm² — a density of 24.3M per mm². The smaller, denser Pascal chip delivers better efficiency per square millimeter, but the 860M's larger die houses far more execution resources.
Core counts differ dramatically. The 860M features 1152 shading units, 96 texture mapping units, and 16 ROPs, while the GT 1030 has only 384 shading units, 24 TMUs, and 16 ROPs. This 3x advantage in shader and TMU count explains the 860M's texture rate of 87.84 GTexel/s versus the GT 1030's 35.23 GTexel/s. Pixel rates are closer: the 860M achieves 21.96 GPixel/s while the GT 1030 reaches 23.49 GPixel/s, with the Pascal part's higher clocks partially compensating for fewer ROPs.
Clock speeds favor the GT 1030 substantially. The newer card runs at 1228 MHz base and 1468 MHz boost, while the 860M operates at 797 MHz base and 915 MHz boost. Memory clocks also differ, with the GT 1030 at 1502 MHz (6 Gbps effective) versus the 860M's 1250 MHz (5 Gbps effective). However, the 860M's 128-bit memory bus doubles the GT 1030's 64-bit bus, yielding 80.00 GB/s bandwidth against just 48.06 GB/s — a 66.5% advantage for the older card.
API support marks a generational split. The GT 1030 supports DirectX 12 (12_1) and Vulkan 1.4, while the 860M is limited to DirectX 12 (11_0) and Vulkan 1.2.175. Both support OpenGL 4.6. The GT 1030 also lists FP16 capability at 17.62 GFLOPS (1:64), a feature absent from the 860M's specifications. Power consumption tells a complementary story: the 860M draws 75 W TDP as an IGP with no power connectors, while the GT 1030 sips 30 W in a single-slot form factor with a 200 W suggested PSU.
FAQ
Q: Which GPU has higher raw compute performance?
A: The GTX 860M delivers 2.108 TFLOPS of FP32 performance versus the GT 1030's 1,127.4 GFLOPS, nearly doubling the newer card's throughput. This translates into a 22.1% lead in Geekbench OpenCL scores (10461 vs 8568).
Q: Does the GT 1030 win any benchmarks?
A: Yes, the GT 1030 wins PassMark G2D by a wide margin, scoring 441 against the 860M's 226 — a 48.8% advantage. This 2D performance gap is the largest single-test difference between the two cards.
Q: How do the memory systems compare?
A: The 860M has a 128-bit memory bus delivering 80.00 GB/s bandwidth, while the GT 1030 uses a 64-bit bus with 48.06 GB/s. Both cards have 2 GB of GDDR5 memory, but the 860M's wider bus provides substantially more bandwidth.
Q: Which card has better DirectX 12 performance?
A: The two cards tie exactly in PassMark DirectX 12 at 13 points each. However, the GT 1030 supports DirectX 12 (12_1) while the 860M is limited to DirectX 12 (11_0), meaning the Pascal card has access to more advanced API features.
Q: What are the physical differences between the two cards?
A: The GTX 860M is an IGP with no power connectors and a 75 W TDP, while the GT 1030 is a single-slot card measuring 145 mm by 69 mm by 18 mm with a 30 W TDP. The 860M's display outputs are portable device dependent, whereas the GT 1030 offers 1x DVI and 1x HDMI 2.0.
Q: How do their transistor counts compare?
A: The 860M packs 3,540 million transistors on a 294 mm² die, while the GT 1030 fits 1,800 million into 74 mm². The GT 1030's 14 nm Samsung process achieves 24.3M transistors per mm², double the 860M's 12.0M per mm² density.
The Verdict
The GTX 860M is the clear performance winner in 3D and compute workloads, taking 9 of 10 benchmark tests with margins ranging from 0.1% to 66.7%. Its 27.5% lead in PassMark G3D and 22.1% edge in Geekbench OpenCL make it the superior choice for gaming and GPU-accelerated tasks. The 860M's 3x advantage in shading units and TMUs, combined with 80.00 GB/s memory bandwidth, provides a structural performance lead that clock speed differences cannot overcome.
The GT 1030 earns its place through efficiency and modern features. Its 30 W TDP versus 75 W, 14 nm process versus 28 nm, and support for DirectX 12 (12_1) and Vulkan 1.4 represent meaningful advances. The 48.8% victory in 2D performance and the ability to run on a 200 W PSU make it a sensible choice for basic desktop tasks and legacy system upgrades. Its launch MSRP was 79 USD.
Users prioritizing 3D rendering, gaming, or compute workloads should select the GTX 860M without hesitation. Those needing a low-power, single-slot card for 2D productivity, media playback, or API compatibility should choose the GT 1030. The data does not support any other conclusion.
Specification Differences
| Specification | GTX 860M | GT 1030 |
|---|---|---|
| Architecture | Kepler | Pascal |
| Process Node | 28 nm | 14 nm |
| Foundry | TSMC | Samsung |
| Transistors | 3,540 million | 1,800 million |
| Die Size | 294 mm² | 74 mm² |
| Transistor Density | 12.0M / mm² | 24.3M / mm² |
| Base Clock | 797 MHz | 1228 MHz |
| Boost Clock | 915 MHz | 1468 MHz |
| Memory Clock | 1250 MHz (5 Gbps effective) | 1502 MHz (6 Gbps effective) |
| Memory Bus Width | 128 bit | 64 bit |
| Memory Bandwidth | 80.00 GB/s | 48.06 GB/s |
| Shading Units | 1152 | 384 |
| TMUs | 96 | 24 |
| ROPs | 16 | 16 |
| Texture Rate | 87.84 GTexel/s | 35.23 GTexel/s |
| Pixel Rate | 21.96 GPixel/s | 23.49 GPixel/s |
| FP32 Performance | 2.108 TFLOPS | 1,127.4 GFLOPS |
| FP16 Performance | — | 17.62 GFLOPS (1:64) |
| TDP | 75 W | 30 W |
| Slot Width | IGP | Single-slot |
| Power Connectors | None | None |
| Suggested PSU | — | 200 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 3.0 x4 |
| Display Outputs | Portable Device Dependent | 1x DVI, 1x HDMI 2.0 |
| DirectX Support | 12 (11_0) | 12 (12_1) |
| Vulkan Support | 1.2.175 | 1.4 |
| Dimensions | — | 145 mm x 69 mm x 18 mm |
| Release Date | 2014-03-09 | 2017-05-16 |
| Launch MSRP | — | 79 USD |
Where Each One Wins
The GTX 860M wins in every 3D gaming and compute scenario. PassMark G3D shows a 27.5% advantage, while DirectX 10, 11, and 9 tests show margins of 66.7%, 35.3%, and 52.8% respectively. The 860M's 2.108 TFLOPS FP32 throughput and 80.00 GB/s bandwidth make it suitable for demanding applications like modern game titles, 3D rendering, and GPU compute tasks. Its 1152 shading units provide the parallelism needed for complex shader workloads.
The GT 1030 wins in 2D performance and efficiency-critical scenarios. Its 441 PassMark G2D score represents a 48.8% improvement over the 860M, making it better suited for desktop productivity, photo editing, and 2D application workloads. The 30 W TDP allows installation in systems with minimal power supplies, and the single-slot 145 mm form factor fits in compact cases. The DirectX 12 (12_1) and Vulkan 1.4 support provide forward compatibility with modern APIs, while the 14 nm process delivers superior transistor density at 24.3M per mm².
For users with laptops, the 860M's IGP form factor and 75 W TDP are the only options, as the GT 1030 is a desktop card. Conversely, desktop builders seeking a low-profile, passively capable card with HDMI 2.0 output and no power connector requirement will find the GT 1030's 200 W suggested PSU and 30 W draw far more accommodating than the 860M's power profile. The choice ultimately comes down to whether raw 3D performance or 2D efficiency matters more for the intended workload.