NVIDIA GeForce GT 1030 vs NVIDIA GeForce GTX 750 Ti Comparison

NVIDIA
GEFORCE

NVIDIA GeForce GT 1030

CORE STATE GP108
VRAM 2 GB
CLOCK SPEED 1468 MHz
TDP 30 W
BUS WIDTH 64 bit
ARCHITECTURE Pascal
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

GeForce GTX 750 Ti

CORE STATE GM107
VRAM 2 GB
CLOCK SPEED 1085 MHz
TDP 60 W
BUS WIDTH 128 bit
ARCHITECTURE Maxwell
nm
PROCESS 28 nm
LAUNCH DATE 2014

PERFORMANCE BENCHMARKS

geekbench_metal
4,637
5,182
geekbench_opencl
8,568
10,827
geekbench_vulkan
9,229
10,065
passmark_directx_10
9
17
passmark_directx_11
17
26
passmark_directx_12
13
18
passmark_directx_9
36
60
passmark_g2d
441
528
passmark_g3d
2,417
3,903
passmark_gpu_compute
1,250
1,744
3dmark_3dmark_steel_nomad_dx12
N/A
117

Analysis: NVIDIA GeForce GT 1030 vs NVIDIA GeForce GTX 750 Ti

The NVIDIA GeForce GTX 750 Ti and the NVIDIA GeForce GT 1030 are two end-of-life graphics cards from different architectural generations, targeting the low-end segment of the market. While the GT 1030 benefits from a newer design and process node, the benchmark data reveals a clear and consistent performance hierarchy between the two, with the older GTX 750 Ti holding a decisive advantage across nearly every test.

Head-to-Head Benchmarks

The data from the head-to-head comparison is unambiguous: the GTX 750 Ti wins 10 out of 10 benchmarks, with no victories for the GT 1030. The most dramatic margin appears in the Passmark DirectX 10 test, where the GTX 750 Ti scores 17 against the GT 1030’s 9, an 88.9% lead. Similarly, the DirectX 9 test shows a 66.7% advantage for the GTX 750 Ti, with scores of 60 versus 36. These legacy API tests highlight a generational gap that the newer card cannot bridge.

Moving to more modern workloads, the GTX 750 Ti continues to dominate. In the Passmark G3D test, it scores 3903 compared to 2417 for the GT 1030, a 61.5% delta. The DirectX 11 test shows a 52.9% lead (26 vs 17), while the DirectX 12 test shows a 38.5% advantage (18 vs 13). The pattern is consistent: the older card is significantly faster in every graphics workload tested.

Compute and general-purpose performance follow the same trend. The Geekbench OpenCL test shows the GTX 750 Ti at 10827 against 8568, a 26.4% lead. The Passmark GPU Compute test shows a 39.5% advantage (1744 vs 1250). Even in the 2D test, the GTX 750 Ti wins, scoring 528 to 441, a 19.7% margin. The smallest difference is in Geekbench Vulkan, where the GTX 750 Ti leads by 9.1% (10065 vs 9229), and Geekbench Metal, where it leads by 11.8% (5182 vs 4637).

Where Each One Wins

Given the benchmark sweep, there is no workload category where the GT 1030 emerges as the winner. The GTX 750 Ti is faster in every single test, from legacy DirectX 9 to modern Vulkan and compute tasks. This suggests that for gaming, general 3D rendering, and GPU-accelerated compute, the GTX 750 Ti is the superior choice.

The GT 1030’s only potential advantage lies outside raw performance. Its lower TDP of 30 W, compared to 60 W for the GTX 750 Ti, and its lower suggested PSU of 200 W versus 250 W, indicate it draws less power and requires a less robust power supply. This makes it a more suitable option for very low-power builds or systems with weak power delivery, but the performance cost is substantial. The GT 1030 also features a newer DirectX 12_1 support level, whereas the GTX 750 Ti is limited to DirectX 12 (11_0), which could matter for specific modern titles, though the benchmark data shows the GTX 750 Ti still wins the DirectX 12 test.

Architecture Differences

The architectural gap is the primary driver of the performance difference. The GTX 750 Ti is built on the Maxwell architecture, using the GM107 chip fabricated on a 28 nm process at TSMC. The GT 1030 uses the Pascal architecture with the GP108 chip, manufactured on a 14 nm process at Samsung. The newer 14 nm node allows for a much higher transistor density: the GT 1030 packs 24.3M transistors per mm², compared to 12.6M for the GTX 750 Ti, despite having a similar total transistor count (1,800 million vs 1,870 million).

This density advantage translates to a much smaller die for the GT 1030: 74 mm² versus 148 mm². The GT 1030 compensates for its smaller size and fewer resources with higher clocks. Its base clock is 1228 MHz and boost clock is 1468 MHz, while the GTX 750 Ti runs at 1020 MHz base and 1085 MHz boost. However, the GTX 750 Ti has far more execution resources: 640 shading units and 40 texture mapping units, versus 384 shading units and 24 TMUs for the GT 1030. Both have 16 ROPs.

The memory subsystems also differ significantly. The GTX 750 Ti uses a 128-bit memory bus, while the GT 1030 is confined to a 64-bit bus. This leads to a bandwidth disparity: 86.40 GB/s for the GTX 750 Ti versus 48.06 GB/s for the GT 1030. Both have 2 GB of GDDR5 memory, but the GT 1030’s memory runs at a slightly higher effective speed of 6 Gbps compared to 5.4 Gbps, though this cannot compensate for the narrower bus.

Specification Differences

The two cards differ on several key specification points. The GTX 750 Ti has a higher TDP at 60 W, while the GT 1030 is rated at 30 W. The suggested PSU also differs: 250 W for the GTX 750 Ti and 200 W for the GT 1030. Neither card requires power connectors.

The bus interface is another differentiator. The GTX 750 Ti uses PCIe 3.0 x16, while the GT 1030 uses PCIe 3.0 x4. This means the GTX 750 Ti has more bandwidth available to the host system, which can be beneficial for certain workloads. Display outputs also differ: the GTX 750 Ti offers 2x DVI and 1x mini-HDMI 1.4a, while the GT 1030 provides 1x DVI and 1x HDMI 2.0.

The GTX 750 Ti has a higher pixel rate at 17.36 GPixel/s and a higher texture rate at 43.40 GTexel/s. The GT 1030 counters with a higher pixel rate of 23.49 GPixel/s, but a lower texture rate of 35.23 GTexel/s. In terms of raw compute, the GTX 750 Ti delivers 1,388.8 GFLOPS of FP32 performance, while the GT 1030 provides 1,127.4 GFLOPS. The GT 1030 does have a specification for FP16 at 17.62 GFLOPS (1:64), which the GTX 750 Ti lacks. The GT 1030 is also physically smaller in height and width, measuring 69 mm by 18 mm, while the GTX 750 Ti’s height and width are not listed.

FAQ

Q: Which card has a higher average benchmark score?

A: The GTX 750 Ti has an average benchmark score of 2953, while the GT 1030 scores 2662.

Q: How much faster is the GTX 750 Ti in the Passmark G3D test?

A: The GTX 750 Ti scores 3903, which is 61.5% higher than the GT 1030’s score of 2417.

Q: Does the GT 1030 have a lower power draw?

A: Yes, the GT 1030 has a TDP of 30 W and a suggested PSU of 200 W, compared to 60 W and 250 W for the GTX 750 Ti.

Q: What is the difference in memory bandwidth?

A: The GTX 750 Ti has a memory bandwidth of 86.40 GB/s, while the GT 1030 has 48.06 GB/s, due to the 128-bit bus on the former and 64-bit bus on the latter.

Q: Which card supports a newer version of DirectX?

A: The GT 1030 supports DirectX 12 (12_1), while the GTX 750 Ti supports DirectX 12 (11_0).

Q: Which card has more shading units?

A: The GTX 750 Ti has 640 shading units, compared to 384 for the GT 1030.

The Verdict

The data is unequivocal. The NVIDIA GeForce GTX 750 Ti is the superior performer, winning every benchmark in the comparison set. Its higher shading unit count, wider memory bus, and greater bandwidth give it a commanding lead in both graphics and compute tasks. The GTX 750 Ti’s average benchmark score of 2953 places it in the 19th percentile of all GPUs, while the GT 1030’s score of 2662 puts it in the 17th percentile. The GTX 750 Ti’s closest rival in the data is the GeForce GTX 860M, with a delta of -0.5%, while the GT 1030 sits near the Quadro K1100M, with a delta of -0.1%.

For users seeking the best performance in games or GPU-accelerated applications, the GTX 750 Ti is the clear choice. Its 88.9% lead in DirectX 10 and 61.5% lead in Passmark G3D demonstrate that it is in a different performance class. The GT 1030’s advantages are limited to power consumption and physical size; its 30 W TDP and compact dimensions make it easier to fit into small, low-power systems. However, the performance penalty is severe, with the GT 1030 losing by 26.4% in OpenCL and 38.5% in DirectX 12. The verdict is straightforward: the GTX 750 Ti is the better GPU for almost any purpose, and the GT 1030 should only be considered when power constraints are the absolute priority.

DETAILED SPECIFICATIONS

SPECIFICATION
GT 1030
GTX 750 Ti
Core Specs
Shading Units
384
640 +66.7%
Shaders
384
640 +66.7%
TMUs
24
40 +66.7%
ROPs
16
16 0.0%
SM Count
3
—
Clocks
Base Clock
1228 MHz
1020 MHz
Boost Clock
1468 MHz
1085 MHz
Memory Clock
1502 MHz 6 Gbps effective
1350 MHz 5.4 Gbps effective
Memory
Memory Size
2 GB
2 GB
VRAM (MB)
2,048
2,048 0.0%
Memory Type
GDDR5
GDDR5
Memory Bus
64 bit
128 bit
Bandwidth
48.06 GB/s
86.40 GB/s
Cache
L1 Cache
48 KB (per SM)
64 KB (per SMM)
L2 Cache
512 KB
2 MB
Performance
Pixel Rate
23.49 GPixel/s
17.36 GPixel/s
Texture Rate
35.23 GTexel/s
43.40 GTexel/s
FP32 (TFLOPS)
1,127.4 GFLOPS
1,388.8 GFLOPS
FP64 (TFLOPS)
35.23 GFLOPS (1:32)
43.40 GFLOPS (1:32)
FP16 (TFLOPS)
17.62 GFLOPS (1:64)
—
Power
TDP
30 W
60 W
TDP (W)
30
60 +100.0%
Suggested PSU
200 W
250 W
Power Connectors
None
None
Architecture
Architecture
Pascal
Maxwell
GPU Name
GP108
GM107
Generation
GeForce 10
GeForce 700
Process Size
14 nm
28 nm
Transistors
1,800 million
1,870 million
Die Size
74 mm²
148 mm²
Foundry
Samsung
TSMC
Density
24.3M / mm²
12.6M / mm²
API Support
DirectX
12 (12_1)
12 (11_0)
OpenGL
4.6
4.6
Vulkan
1.4
1.4
OpenCL
3.0
3.0
CUDA
6.1
5.0
Shader Model
6.8
6.7 (5.1)
Physical
Slot Width
Single-slot
Single-slot
Length
145 mm 5.7 inches
145 mm 5.7 inches
Height
69 mm 2.7 inches
—
Outputs
1x DVI1x HDMI 2.0
2x DVI1x mini-HDMI 1.4a
Bus Interface
PCIe 3.0 x4
PCIe 3.0 x16
Other
Launch Price
79 USD
149 USD
Production
End-of-life
End-of-life
Predecessor
GeForce 900
GeForce 600
Successor
GeForce 20
GeForce 900
View GeForce GT 1030 Details View GeForce GTX 750 Ti Details