NVIDIA A10M vs NVIDIA Tesla V100S PCIe 32 GB Comparison
NVIDIA A10M
Tesla V100S PCIe 32 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA A10M vs NVIDIA Tesla V100S PCIe 32 GB
The NVIDIA Tesla V100S PCIe 32 GB and the NVIDIA A10M are both end-of-life server accelerators, but they target very different workloads. The V100S is a Volta-generation powerhouse focused on memory bandwidth, while the A10M is an Ampere-generation card with a higher transistor count and more shading units. The benchmark data shows a clear winner in raw compute, but the architectural trade-offs make each card suitable for distinct tasks.
Head-to-Head Benchmarks
The single available benchmark, Geekbench OpenCL, shows a decisive victory for the Tesla V100S. It scores 194,415 points, while the A10M scores 135,230. This gives the V100S a 43.8% lead, which is a massive performance gap in a compute benchmark.
This result is consistent with the cards' positioning. The V100S sits in the 98th percentile of all GPUs, while the A10M sits in the 96th. That two-point percentile difference represents a significant jump in raw compute power. When looking at the V100S's nearest rivals, its score is only 0.8% behind the NVIDIA RTX 6000D and 3.9% ahead of the NVIDIA A100 SXM4 40 GB. This places it in elite company.
The A10M's score of 135,230 puts it in a different performance tier. Its nearest rival is the NVIDIA RTX 4000 Ada Generation, which scores 135,218 — a 0% delta. The AMD Radeon PRO W6800 scores 135,396, which is 0.1% higher. In practice, the A10M is effectively tied with these cards, making it a mid-pack performer in this specific test. The gap between the two cards is not a small margin; it's a fundamental difference in compute capability.
Architecture Differences
The architectural split between these two cards is stark. The V100S uses the GV100 chip on the Volta architecture, built on a 12 nm process at TSMC. The A10M uses the GA102 chip on the Ampere architecture, built on an 8 nm process at Samsung. This node difference is critical: the A10M packs 28,300 million transistors into a 628 mm² die, giving it a density of 45.1M / mm². The V100S has 21,100 million transistors on a larger 815 mm² die, with a lower density of 25.9M / mm². The A10M is clearly the more modern, denser design.
The memory subsystems could not be more different. The V100S uses 32 GB of HBM2 with a 4096-bit bus, delivering 1.13 TB/s of bandwidth. The A10M uses 20 GB of GDDR6 on a 320-bit bus, providing 500.2 GB/s. The V100S has more than double the memory bandwidth, which is its primary weapon. The A10M counters with a higher raw shader count: 7,168 shading units versus 5,120 on the V100S. However, the V100S has more texture mapping units (320 vs 224) and more ROPs (128 vs 80).
Tensor core counts also diverge. The V100S has 640 tensor cores, while the A10M has 224. The A10M adds 56 RT cores, which the V100S lacks entirely. The FP32 throughput favors the A10M at 23.44 TFLOPS versus 16.35 TFLOPS for the V100S. In FP16, the V100S reaches 32.71 TFLOPS (2:1), while the A10M is capped at 23.44 TFLOPS (1:1). The V100S also leads in pixel rate (204.4 GPixel/s vs 130.8 GPixel/s) and texture rate (511.0 GTexel/s vs 366.2 GTexel/s). The A10M does support DirectX 12 Ultimate (12_2), while the V100S is limited to DirectX 12 (12_1).
Where Each One Wins
The V100S wins in memory-bound scenarios. Its 1.13 TB/s bandwidth is a massive advantage for workloads that move large datasets, such as training large neural networks or processing high-resolution volumetric data. The 32 GB capacity also allows larger models to reside in GPU memory without spilling to system RAM. Its 2:1 FP16 ratio means it can accelerate mixed-precision training, a common technique in AI, by doubling the throughput.
The A10M wins in pure shader-count scenarios. Its 7,168 shading units and 23.44 TFLOPS of FP32 make it a strong candidate for traditional graphics rendering or compute tasks that rely heavily on parallel floating-point math. The 56 RT cores provide hardware-accelerated ray tracing, which the V100S cannot do. The A10M's single-slot design and 150 W TDP also make it easier to integrate into dense server configurations, whereas the V100S requires a dual-slot layout and 250 W. The A10M's PCIe 4.0 x16 interface doubles the bus bandwidth compared to the V100S's PCIe 3.0 x16, which helps with data transfer to and from the host.
FAQ
Q: Which GPU has a higher raw benchmark score?
A: The NVIDIA Tesla V100S PCIe 32 GB scores 194,415 in Geekbench OpenCL, which is 43.8% higher than the NVIDIA A10M's 135,230.
Q: Which card has more memory bandwidth?
A: The V100S has 1.13 TB/s of bandwidth from its HBM2 memory, far exceeding the A10M's 500.2 GB/s from GDDR6.
Q: Does the A10M support ray tracing?
A: Yes, the A10M has 56 RT cores. The V100S has no RT cores, so it cannot perform hardware-accelerated ray tracing.
Q: Which card has more shading units?
A: The A10M has 7,168 shading units, while the V100S has 5,120. This gives the A10M a higher FP32 throughput of 23.44 TFLOPS versus 16.35 TFLOPS.
Q: Are these cards still in production?
A: No. Both the NVIDIA Tesla V100S PCIe 32 GB and the NVIDIA A10M have a production status of "End-of-life".
Q: What is the power connector requirement for each?
A: The V100S uses 2x 8-pin power connectors, while the A10M uses a single 8-pin EPS connector.
The Verdict
The data points to a clear split. If you need maximum memory bandwidth and large memory capacity for AI or scientific computing, the Tesla V100S is the superior choice. Its 43.8% benchmark lead proves it is the faster compute card, and its 32 GB HBM2 pool is a practical asset. The 98th percentile ranking confirms it competes near the top of the GPU hierarchy.
If you need a more efficient, denser card with modern features, the A10M is the pick. Its 150 W TDP and single-slot design make it ideal for multi-GPU servers where power and space are constrained. Its 56 RT cores and DirectX 12 Ultimate support give it a graphics capability that the V100S lacks. The PCIe 4.0 interface also provides faster host communication.
For a builder prioritizing raw compute and memory, choose the V100S. For a builder prioritizing efficiency, modern architecture, and ray tracing, choose the A10M. The benchmark data does not lie: the V100S is the faster card, but the A10M is the more versatile one.
Specification Differences
| Specification | NVIDIA Tesla V100S PCIe 32 GB | NVIDIA A10M |
|---|---|---|
| Architecture | Volta | Ampere |
| Process Node | 12 nm | 8 nm |
| Foundry | TSMC | Samsung |
| Transistors | 21,100 million | 28,300 million |
| Die Size | 815 mm² | 628 mm² |
| Transistor Density | 25.9M / mm² | 45.1M / mm² |
| Base Clock | 1245 MHz | 975 MHz |
| Boost Clock | 1597 MHz | 1635 MHz |
| Memory Clock | 1107 MHz (2.2 Gbps effective) | 1563 MHz (12.5 Gbps effective) |
| Memory Size | 32 GB | 20 GB |
| Memory Type | HBM2 | GDDR6 |
| Memory Bus | 4096 bit | 320 bit |
| Memory Bandwidth | 1.13 TB/s | 500.2 GB/s |
| Shading Units | 5120 | 7168 |
| TMUs | 320 | 224 |
| ROPs | 128 | 80 |
| RT Cores | N/A | 56 |
| Tensor Cores | 640 | 224 |
| Pixel Rate | 204.4 GPixel/s | 130.8 GPixel/s |
| Texture Rate | 511.0 GTexel/s | 366.2 GTexel/s |
| FP32 | 16.35 TFLOPS | 23.44 TFLOPS |
| FP16 | 32.71 TFLOPS (2:1) | 23.44 TFLOPS (1:1) |
| TDP | 250 W | 150 W |
| Slot Width | Dual-slot | Single-slot |
| Power Connectors | 2x 8-pin | 8-pin EPS |
| Suggested PSU | 600 W | 450 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Dimensions | Not specified | 267 mm / 10.5 inches length, 112 mm / 4.4 inches height |
| Geekbench OpenCL | 194415 | 135230 |
| Percentile | 98 | 96 |