NVIDIA A10M vs NVIDIA Tesla V100 SXM2 32 GB Comparison
NVIDIA A10M
Tesla V100 SXM2 32 GB
PERFORMANCE BENCHMARKS
Analysis: NVIDIA A10M vs NVIDIA Tesla V100 SXM2 32 GB
The NVIDIA Tesla V100 SXM2 32 GB and the NVIDIA A10M represent two distinct generations of NVIDIA's data-center compute lineup. The V100 is a Volta-era flagship built for high-end HPC and AI training, while the A10M is an Ampere-based server card designed for inference and virtualized workloads. Benchmark data shows the A10M holds a narrow edge in raw compute performance, but the V100 counters with a significantly larger memory footprint and higher memory bandwidth. The data indicates that the A10M is the better choice for users prioritizing raw FP32 throughput and modern PCIe connectivity, while the V100 is preferable for workloads that are memory-capacity-bound or require massive bandwidth.
The Verdict
Based strictly on benchmark results, the NVIDIA A10M is the winner in the only head-to-head comparison available. In the Geekbench OpenCL test, the A10M scores 135,230 against the V100’s 131,696, a delta of -2.6% from the V100’s perspective. This means the A10M outperforms the V100 by roughly 2.6% in this specific compute workload. The A10M’s average benchmark score of 135,230 also places it in the 96th percentile of all GPUs, matching the V100’s percentile ranking, so both are top-tier performers.
However, the verdict is not one-sided. The V100 SXM2 32 GB offers 32 GB of HBM2 memory compared to the A10M’s 20 GB of GDDR6. For workloads that require loading very large models or datasets entirely into GPU memory, the V100’s 12 GB advantage is decisive. Furthermore, the V100’s memory bandwidth of 898.0 GB/s is nearly 80% higher than the A10M’s 500.2 GB/s. If a task is limited by memory bandwidth rather than raw compute, the V100 will likely pull ahead despite its lower OpenCL score.
The A10M, on the other hand, is the more efficient and modern solution. It draws 150 W compared to the V100’s 250 W, uses a PCIe 4.0 x16 interface instead of PCIe 3.0, and is a single-slot card with an 8-pin EPS connector, making it far easier to integrate into dense servers. The V100 is an SXM module with no power connectors of its own and requires a 600 W suggested PSU. For new deployments, the A10M’s lower power draw and newer architecture make it the more practical choice, provided 20 GB of memory is sufficient.
Architecture Differences
The two GPUs are built on fundamentally different architectures and process nodes. The V100 uses the GV100 chip based on the Volta architecture, manufactured on a 12 nm process at TSMC. It contains 21,100 million transistors on an 815 mm² die, resulting in a transistor density of 25.9M / mm². In contrast, the A10M uses the GA102 chip based on the Ampere architecture, built on an 8 nm process at Samsung. This die packs 28,300 million transistors into a smaller 628 mm² area, yielding a much higher density of 45.1M / mm².
The compute configurations diverge significantly. The V100 has 5,120 shading units, 320 TMUs, and 128 ROPs. It also features 640 tensor cores, which are dedicated AI acceleration units. The A10M has more shading units at 7,168, but fewer TMUs (224) and ROPs (80). The A10M includes 56 RT cores, which the V100 lacks entirely, and has 224 tensor cores. This makes the A10M a more balanced card for graphics-adjacent workloads, while the V100’s tensor core count is higher for pure matrix math.
Memory architecture is another fundamental split. The V100 uses HBM2 with a massive 4096-bit bus, while the A10M uses GDDR6 with a 320-bit bus. The V100’s memory operates at 877 MHz (1754 Mbps effective), while the A10M’s runs at 1563 MHz (12.5 Gbps effective). The V100’s wider bus gives it a bandwidth of 898.0 GB/s versus the A10M’s 500.2 GB/s. The A10M compensates with a higher boost clock of 1635 MHz versus the V100’s 1530 MHz, and a much higher FP32 throughput.
Head-to-Head Benchmarks
The only direct benchmark comparison available is the Geekbench OpenCL test. Here, the NVIDIA A10M wins with a score of 135,230, while the NVIDIA Tesla V100 SXM2 32 GB scores 131,696. The delta is -2.6% relative to the V100, meaning the A10M is approximately 2.6% faster in this workload. This is a modest but real advantage for the A10M in general-purpose compute.
The V100 also has a Geekbench Vulkan score of 143,765, which is not directly compared to the A10M because the A10M lacks a Vulkan benchmark result. However, the V100’s Vulkan score is notably higher than its OpenCL score, suggesting the Volta architecture handles Vulkan workloads particularly well. The A10M’s average benchmark score of 135,230 is its only data point, while the V100’s average is 137,731, which is higher than the A10M’s average. This is because the V100’s Vulkan score of 143,765 pulls its average up above the A10M’s single OpenCL result.
Looking at the nearest rivals, the V100’s average score of 137,731 puts it just behind the AMD Instinct MI100 (139,035) and slightly ahead of the NVIDIA Tesla V100 PCIe 16 GB (138,063). The A10M’s 135,230 sits within 1% of several competitors, including the NVIDIA RTX 4000 Ada Generation (135,218) and the AMD Radeon PRO W6800 (135,396). This indicates both cards are clustered tightly in performance, with the A10M’s edge over the V100 being within the noise of typical benchmark variation.
Specification Differences
The following table highlights only the fields where the two cards differ, based on the provided data:
| Specification | Tesla V100 SXM2 32 GB | A10M |
|---|---|---|
| Architecture | Volta | Ampere |
| Process Node | 12 nm | 8 nm |
| Foundry | TSMC | Samsung |
| Transistors | 21,100 million | 28,300 million |
| Die Size | 815 mm² | 628 mm² |
| Transistor Density | 25.9M / mm² | 45.1M / mm² |
| Base Clock | 1290 MHz | 975 MHz |
| Boost Clock | 1530 MHz | 1635 MHz |
| Memory Clock | 877 MHz (1754 Mbps effective) | 1563 MHz (12.5 Gbps effective) |
| Memory Size | 32 GB | 20 GB |
| Memory Type | HBM2 | GDDR6 |
| Memory Bus Width | 4096 bit | 320 bit |
| Memory Bandwidth | 898.0 GB/s | 500.2 GB/s |
| Shading Units | 5120 | 7168 |
| TMUs | 320 | 224 |
| ROPs | 128 | 80 |
| RT Cores | 0 | 56 |
| Tensor Cores | 640 | 224 |
| Pixel Rate | 195.8 GPixel/s | 130.8 GPixel/s |
| Texture Rate | 489.6 GTexel/s | 366.2 GTexel/s |
| FP32 | 15.67 TFLOPS | 23.44 TFLOPS |
| FP16 | 31.33 TFLOPS (2:1) | 23.44 TFLOPS (1:1) |
| TDP | 250 W | 150 W |
| Slot Width | SXM Module | Single-slot |
| Power Connectors | None | 8-pin EPS |
| Suggested PSU | 600 W | 450 W |
| Bus Interface | PCIe 3.0 x16 | PCIe 4.0 x16 |
| DirectX | 12 (12_1) | 12 Ultimate (12_2) |
| Dimensions | Not specified | 267 mm / 10.5 inches length, 112 mm / 4.4 inches height |
| Generation | Tesla Volta (Vxx) | Server Ampere (Axx) |
| Predecessor | Tesla Pascal | Tesla Turing |
| Successor | Tesla Turing | Server Ada |
| Release Date | 2018-03-26 | Not specified |
FAQ
Q: Which GPU is faster in the available benchmark?
A: The NVIDIA A10M wins the Geekbench OpenCL test with a score of 135,230, which is 2.6% higher than the Tesla V100 SXM2 32 GB’s score of 131,696.
Q: Does the V100 have any advantages over the A10M in memory?
A: Yes. The V100 has 32 GB of HBM2 memory with a 4096-bit bus and 898.0 GB/s bandwidth, while the A10M has 20 GB of GDDR6 on a 320-bit bus with 500.2 GB/s bandwidth.
Q: How does the FP32 performance compare?
A: The A10M is significantly ahead in FP32, delivering 23.44 TFLOPS, while the V100 delivers 15.67 TFLOPS. This is a 49.6% advantage for the A10M in raw single-precision throughput.
Q: Which card has a lower power draw?
A: The A10M has a TDP of 150 W, which is notably lower than the V100’s 250 W. The A10M also requires a lower suggested PSU of 450 W versus 600 W for the V100.
Q: Do both cards support the same PCIe interface?
A: No. The A10M uses the newer PCIe 4.0 x16 interface, while the V100 is limited to PCIe 3.0 x16.
Q: Is the V100 better for AI workloads due to its tensor cores?
A: The V100 has 640 tensor cores, while the A10M has 224. However, the A10M’s FP16 performance is 23.44 TFLOPS (1:1), while the V100’s FP16 is 31.33 TFLOPS (2:1), so the V100 has a raw FP16 advantage despite the A10M’s newer architecture.