NVIDIA A100 SXM4 80 GB vs NVIDIA H200 NVL Comparison
NVIDIA A100 SXM4 80 GB
H200 NVL
PERFORMANCE BENCHMARKS
Analysis: NVIDIA A100 SXM4 80 GB vs NVIDIA H200 NVL
The NVIDIA H200 NVL and the NVIDIA A100 SXM4 80 GB represent two distinct eras of NVIDIA’s server GPU lineup. The H200 NVL, built on the Hopper architecture, is a current-generation part aimed at high-end AI and HPC workloads, while the A100 SXM4 80 GB, an Ampere-generation product, is now end-of-life but remains widely deployed. This analysis draws exclusively on the provided benchmark, architectural, and specification data to compare the two.
The Verdict
The data presents a stark generational gap. In the only directly comparable benchmark metric available, the NVIDIA H200 NVL posts an average benchmark score of 334,891, which places it in the 100th percentile of all GPUs. The NVIDIA A100 SXM4 80 GB, by contrast, achieves an average score of 183,725, sitting in the 98th percentile. This translates to an 82% performance advantage for the H200 NVL in this specific test, a massive leap that underscores the architectural improvements between the two.
For organizations prioritizing absolute peak compute and memory bandwidth, the H200 NVL is the clear choice. Its specifications dwarf the older part: it offers 141 GB of HBM3e memory with 4.89 TB/s of bandwidth, compared to the A100’s 80 GB of HBM2e at 2.04 TB/s. The H200 NVL also has significantly higher raw compute throughput, with 60.32 TFLOPS FP32 performance versus the A100’s 19.49 TFLOPS. The H200 NVL is the superior option for any workload that can leverage its newer architecture and larger memory pool.
However, the A100 SXM4 80 GB is not without merit, though its role is now limited. Its 98th percentile standing shows it remains a capable part, and its 80 GB of memory is still substantial. For legacy applications that are already optimized for Ampere, or for systems with infrastructure built around the A100’s 400 W TDP and OAM module form factor, it remains a functional, if aging, workhorse. The H200 NVL’s 600 W TDP and dual-slot design require more power and a different physical layout. The verdict is simple: the H200 NVL is the performance leader by a wide margin, while the A100 SXM4 80 GB serves as a legacy option for existing deployments.
Where Each One Wins
The H200 NVL wins decisively on every performance and capacity metric in the FACT PACK. Its FP32 compute is 60.32 TFLOPS, a 3.1x increase over the A100’s 19.49 TFLOPS. FP16 performance also favors the newer card, with the H200 NVL reaching 120.6 TFLOPS (2:1) versus the A100’s 77.97 TFLOPS (4:1). Memory bandwidth is another clear victory: 4.89 TB/s versus 2.04 TB/s, a 2.4x advantage. The H200 NVL’s 141 GB memory capacity is 76% larger than the A100’s 80 GB, a crucial difference for massive model training or inference tasks that exceed the older card’s capacity.
The A100 SXM4 80 GB does win in a few specific, albeit less compute-centric, areas. Its pixel rate is 225.6 GPixel/s, far higher than the H200 NVL’s 42.84 GPixel/s. This suggests the A100 has a more capable rasterization pipeline, a vestige of its design that also serves some non-AI workloads. The A100 also has a lower TDP of 400 W compared to the H200 NVL’s 600 W, making it more power-efficient in terms of raw power draw, though the H200 NVL’s performance per watt is likely superior given its massive compute lead. The A100’s OAM module form factor also differs from the H200 NVL’s dual-slot design, which may be a deciding factor for specific server chassis compatibility.
Architecture Differences
The two GPUs are built on fundamentally different architectures and manufacturing processes. The H200 NVL uses the GH100 chip, based on the Hopper architecture, and is fabricated on a 5 nm process at TSMC. This chip contains 80,000 million transistors on a die size of 814 mm², yielding a transistor density of 98.3M / mm². The A100 SXM4 80 GB uses the GA100 chip, based on the older Ampere architecture, and is built on a 7 nm process, also at TSMC. Its chip holds 54,200 million transistors on a slightly larger die of 826 mm², resulting in a lower density of 65.6M / mm². The newer 5 nm process allows for significantly more transistors in a similar die area.
Memory technology is another major differentiator. The H200 NVL is equipped with 141 GB of HBM3e, a newer and faster memory standard, connected via a 6144-bit bus. The A100 SXM4 80 GB uses 80 GB of HBM2e on a 5120-bit bus. This combination of newer memory and a wider bus gives the H200 NVL its substantial bandwidth advantage. The H200 NVL also features more computational resources: 16,896 shading units, 528 TMUs, and 528 tensor cores, compared to the A100’s 6,912 shading units, 432 TMUs, and 432 tensor cores. The H200 NVL’s ROP count is lower at 24 versus the A100’s 160, which explains the A100’s higher pixel rate.
Interface and power delivery also differ. The H200 NVL uses a PCIe 5.0 x16 bus interface and requires an 8-pin EPS power connector, with a suggested PSU of 1000 W. The A100 SXM4 80 GB uses the older PCIe 4.0 x16 interface and, as an OAM module, has no discrete power connectors, requiring an 800 W system PSU. The H200 NVL’s dimensions are 267 mm in length and 111 mm in height, while the A100’s dimensions are not listed. The H200 NVL is an active product, while the A100 is end-of-life.
FAQ
Q: How much faster is the H200 NVL than the A100 SXM4 80 GB in the provided benchmark?
A: The H200 NVL scores 334,891 in its benchmark, while the A100 SXM4 80 GB scores 183,725. This represents an approximately 82% higher score for the H200 NVL.
Q: Which GPU has more memory and bandwidth?
A: The H200 NVL has 141 GB of HBM3e memory with 4.89 TB/s of bandwidth. The A100 SXM4 80 GB has 80 GB of HBM2e memory with 2.04 TB/s of bandwidth. The H200 NVL is superior in both capacity and speed.
Q: Are these GPUs from the same architecture?
A: No. The H200 NVL is based on the Hopper architecture (GH100 chip), while the A100 SXM4 80 GB is based on the older Ampere architecture (GA100 chip). They also use different manufacturing processes (5 nm for H200, 7 nm for A100).
Q: What is the power draw difference?
A: The H200 NVL has a TDP of 600 W, while the A100 SXM4 80 GB has a TDP of 400 W. The H200 NVL also suggests a 1000 W PSU, whereas the A100 suggests an 800 W PSU.
Q: Is the A100 SXM4 80 GB still a relevant product?
A: Its production status is listed as "End-of-life." However, its benchmark score places it in the 98th percentile of all GPUs, so it remains a high-performing part for certain legacy workloads, though it is no longer the latest technology.
Q: How does the H200 NVL compare to its nearest rival, the NVIDIA B200?
A: The H200 NVL scores 334,891, which is 3.1% lower than the NVIDIA B200’s average score of 345,482. This places the B200 as a slightly faster option.
Head-to-Head Benchmarks
The FACT PACK does not include a direct head-to-head benchmark suite, but the single available benchmark score for each GPU, along with their architectural specifications, provides a clear picture of the performance gap. The H200 NVL’s Geekbench OpenCL score of 334,891 is the primary data point. The A100 SXM4 80 GB’s Geekbench Vulkan score of 183,725 is its only listed benchmark. While these are different test suites (OpenCL vs. Vulkan), they both measure general compute performance. The H200 NVL’s score is higher, and its 100th percentile ranking versus the A100’s 98th percentile confirms its top-tier status.
The biggest wins for the H200 NVL come from its raw compute and memory advantages. Its FP32 throughput of 60.32 TFLOPS is more than triple the A100’s 19.49 TFLOPS. In FP16, the H200 NVL’s 120.6 TFLOPS (2:1) exceeds the A100’s 77.97 TFLOPS (4:1) by a significant margin. The memory bandwidth difference is also a dominant factor: 4.89 TB/s versus 2.04 TB/s means the H200 NVL can feed its compute units far more effectively. The 141 GB vs. 80 GB memory capacity is another decisive win, eliminating capacity constraints for larger datasets.
The A100’s biggest win is in pixel throughput, where it achieves 225.6 GPixel/s compared to the H200 NVL’s 42.84 GPixel/s. This is a substantial 5.3x advantage for the older card and indicates a design focus on rasterization that the H200 NVL does not share. The A100 also has a lower TDP (400 W vs. 600 W), which is a win in power consumption, though not in performance. In terms of nearest rivals, the H200 NVL is 5.3% ahead of the AMD Instinct MI300X (which scores 317,994) and 13.2% ahead of the NVIDIA L40S (295,763). The A100 SXM4 80 GB’s closest rival is the NVIDIA RTX 5000 Ada Generation (184,664), which is only 0.5% faster, and the RTX PRO 5000 Blackwell (182,109), which is 0.9% slower. This shows the A100 is closely matched with modern workstation parts, while the H200 NVL sits in a much higher performance tier.