AMD Radeon RX 7400 OEM vs NVIDIA H200 NVL Comparison
AMD Radeon RX 7400 OEM
H200 NVL
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 7400 OEM vs NVIDIA H200 NVL
Head-to-Head Benchmarks
The recorded data for this comparison is strikingly one-sided. The AMD Radeon RX 7400 OEM has no entries in the benchmark database, while the NVIDIA H200 NVL posts a Geekbench OpenCL score of 334,891. With zero recorded measurements for the AMD part, there are no direct head-to-head wins for the RX 7400 OEM. The H200 NVL, by contrast, holds a percentile ranking of 100 among all GPUs, placing it at the very top of the distribution.
The H200 NVL’s nearest rivals provide context for its score. Against the NVIDIA B200, which averages 345,482, the H200 NVL trails by 3.1 percent. Against the AMD Instinct MI300X, which averages 317,994, the H200 NVL leads by 5.3 percent. The NVIDIA B300 SXM6 AC, averaging 369,831, sits 9.4 percent ahead of the H200 NVL. The NVIDIA L40S, averaging 295,763, trails the H200 NVL by 13.2 percent. These deltas confirm that the H200 NVL operates in a performance tier where it outpaces one major AMD accelerator and falls narrowly behind two newer NVIDIA parts.
Because the RX 7400 OEM has no benchmark scores, its average benchmark score is recorded as zero. The database therefore shows no measurable compute performance for the AMD card in this test suite. The H200 NVL’s single benchmark result stands as the only quantitative performance data available for this page.
Where Each One Wins
The H200 NVL wins on every measurable axis in this comparison. Its Geekbench OpenCL score of 334,891 represents a compute capability that the RX 7400 OEM cannot match, as the AMD card has no recorded scores. The H200 NVL also holds the 100th percentile among all GPUs, meaning the database ranks it above every other recorded graphics processor.
The RX 7400 OEM, lacking any benchmark entries, cannot claim a single recorded win. Its role in this comparison is defined entirely by its specifications, not by measured outcomes. The H200 NVL, by contrast, delivers a compute workload performance that places it ahead of the AMD Instinct MI300X by 5.3 percent and behind only the B200 and B300 SXM6 AC among its nearest rivals.
Use-case splits from the data are clear. For any application relying on raw compute throughput, such as the OpenCL workloads captured in the database, the H200 NVL is the only option with evidence of capability. The RX 7400 OEM’s lack of benchmark data means no use case can be substantiated from measurements.
Architecture Differences
The two GPUs come from fundamentally different architectural lineages. The AMD Radeon RX 7400 OEM uses the Navi 33 chip, built on RDNA 3.0 architecture with the codename Hotpink Bonefish. It belongs to the Navi III generation within the RX 7000 series. The NVIDIA H200 NVL uses the GH100 chip, built on Hopper architecture, and belongs to the Server Hopper generation.
Manufacturing processes differ substantially. AMD’s Navi 33 is fabricated on a 6 nm process at TSMC, while NVIDIA’s GH100 uses a 5 nm process, also at TSMC. The transistor counts reflect the scale disparity: the RX 7400 OEM contains 13,300 million transistors on a 204 mm² die, yielding a density of 65.2 million transistors per square millimeter. The H200 NVL packs 80,000 million transistors onto an 814 mm² die, achieving 98.3 million transistors per square millimeter. The density advantage of the H200 NVL is direct evidence of its more advanced process node.
Shader and compute resources diverge sharply. The RX 7400 OEM has 1,792 shading units, 112 texture mapping units, and 64 render output units. It includes 28 ray tracing cores but no tensor cores. The H200 NVL has 16,896 shading units, 528 texture mapping units, and only 24 render output units. It has no dedicated ray tracing cores listed, but it includes 528 tensor cores, which are absent from the AMD design.
The H200 NVL’s FP16 throughput of 120.6 TFLOPS at a 2:1 ratio versus FP32 indicates specialized tensor core acceleration. The RX 7400 OEM delivers FP16 at 7.885 TFLOPS with a 1:1 ratio, meaning no half-precision acceleration beyond standard shader execution. The H200 NVL’s FP32 of 60.32 TFLOPS is roughly 7.7 times the RX 7400 OEM’s 7.885 TFLOPS.
Specification Differences
Memory configurations could not be more different. The RX 7400 OEM uses 8 GB of GDDR6 on a 128-bit bus, yielding 172.8 GB/s of bandwidth. The H200 NVL uses 141 GB of HBM3e on a 6144-bit bus, delivering 4.89 TB/s. The H200 NVL’s memory bandwidth is over 28 times that of the AMD card, and its capacity is nearly 18 times larger.
Clock speeds show an unusual pattern. The RX 7400 OEM has a base clock of 330 MHz and a boost clock of 1100 MHz, with memory clocked at 1350 MHz for 10.8 Gbps effective. The H200 NVL runs at a 1365 MHz base and 1785 MHz boost, with memory at 1593 MHz for 6.4 Gbps effective. Despite the AMD part’s lower clock rates, its GDDR6 memory operates at a higher effective data rate than the HBM3e in the NVIDIA card, though the massive bus width difference overwhelms this.
Power and physical requirements diverge dramatically. The RX 7400 OEM has a TDP of 55 W, uses a single 6-pin power connector, and suggests a 250 W power supply. It is a single-slot card measuring 167 mm in length. The H200 NVL has a TDP of 600 W, uses an 8-pin EPS connector, and suggests a 1000 W power supply. It is dual-slot, 267 mm long, and 111 mm tall.
Interface and output differences are equally stark. The RX 7400 OEM uses PCIe 4.0 x8 and provides 1x HDMI 2.1a plus 3x DisplayPort 2.1 outputs. The H200 NVL uses PCIe 5.0 x16 and has no display outputs, confirming its server-oriented design. API support also diverges: the RX 7400 OEM supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the H200 NVL lists N/A for all three APIs, indicating it is not intended for graphics rendering workloads.
The RX 7400 OEM’s release date is recorded as August 7, 2025, while the H200 NVL’s is November 17, 2024. The H200 NVL has an active production status, while the RX 7400 OEM’s production status is not recorded. The AMD card’s predecessor is listed as Navi II and successor as Navi IV; the NVIDIA card’s predecessor is Server Ada and successor is Server Blackwell.
FAQ
Q: What is the benchmark score difference between the two GPUs?
A: The H200 NVL has a Geekbench OpenCL score of 334,891. The RX 7400 OEM has no recorded benchmark scores, so no comparison can be made from measured data.
Q: How does the H200 NVL compare to its nearest rivals?
A: The H200 NVL trails the NVIDIA B200 by 3.1 percent, leads the AMD Instinct MI300X by 5.3 percent, trails the NVIDIA B300 SXM6 AC by 9.4 percent, and leads the NVIDIA L40S by 13.2 percent.
Q: Which GPU has more memory bandwidth?
A: The H200 NVL has 4.89 TB/s of bandwidth from HBM3e memory on a 6144-bit bus. The RX 7400 OEM has 172.8 GB/s from GDDR6 on a 128-bit bus.
Q: What are the transistor density figures for each chip?
A: The RX 7400 OEM’s Navi 33 chip has 13,300 million transistors on a 204 mm² die, giving 65.2 million transistors per square millimeter. The H200 NVL’s GH100 chip has 80,000 million transistors on an 814 mm² die, giving 98.3 million per square millimeter.
Q: Do these GPUs support the same APIs?
A: No. The RX 7400 OEM supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The H200 NVL lists N/A for DirectX, OpenGL, and Vulkan.
Q: What is the power consumption difference?
A: The RX 7400 OEM has a TDP of 55 W with a suggested power supply of 250 W. The H200 NVL has a TDP of 600 W with a suggested power supply of 1000 W.
The Verdict
The database presents an unambiguous picture. The NVIDIA H200 NVL is a compute-focused accelerator with a Geekbench OpenCL score of 334,891, placing it in the 100th percentile of all GPUs. The AMD Radeon RX 7400 OEM has no recorded benchmark performance, meaning its compute capabilities cannot be quantified from the available data.
For workloads measured by OpenCL compute benchmarks, the H200 NVL is the only option with evidence of performance. Its nearest rival comparisons show it outperforming the AMD Instinct MI300X by 5.3 percent and the NVIDIA L40S by 13.2 percent, while trailing the newer B200 and B300 SXM6 AC parts by 3.1 percent and 9.4 percent respectively. Those deltas place it firmly in the upper tier of accelerators.
The RX 7400 OEM, with its 8 GB GDDR6 memory, 55 W TDP, and display outputs, is clearly positioned for a different role. Its RDNA 3.0 architecture with 28 ray tracing cores and DirectX 12 Ultimate support suggests a graphics-oriented design. The H200 NVL’s lack of display outputs, absence of graphics API support, and massive HBM3e memory capacity indicate a server compute role.
The choice depends entirely on the workload type. For compute tasks captured in the benchmark database, the H200 NVL delivers a 334,891 OpenCL score and sits at the 100th percentile. The RX 7400 OEM cannot be evaluated for such tasks because no data exists. For any graphics-oriented application requiring display outputs and consumer API support, the RX 7400 OEM has the necessary specifications, while the H200 NVL has none.
The production status of the H200 NVL is recorded as active, while the RX 7400 OEM’s status is unlisted. The H200 NVL’s release date of November 17, 2024 predates the RX 7400 OEM’s August 7, 2025 release. Those dates, combined with the benchmark data, suggest the H200 NVL is an established, measurable compute product while the RX 7400 OEM remains a specification-only entry in the database.