NVIDIA A100 SXM4 40 GB vs NVIDIA H200 NVL Comparison

NVIDIA
GEFORCE

NVIDIA A100 SXM4 40 GB

CORE STATE GA100
VRAM 40 GB
CLOCK SPEED 1410 MHz
TDP 400 W
BUS WIDTH 5120 bit
ARCHITECTURE Ampere
nm
PROCESS 7 nm
LAUNCH DATE 2020
VS
NVIDIA
GEFORCE

H200 NVL

CORE STATE GH100
VRAM 141 GB
CLOCK SPEED 1785 MHz
TDP 600 W
BUS WIDTH 6144 bit
ARCHITECTURE Hopper
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_opencl
201,096
334,891
geekbench_vulkan
173,198
N/A

Analysis: NVIDIA A100 SXM4 40 GB vs NVIDIA H200 NVL

NVIDIA’s H200 NVL and A100 SXM4 40 GB represent two distinct eras of accelerated computing, and the benchmark data quantifies just how wide that generational gap has become. In the single available head-to-head compute test, the H200 NVL delivers a score of 334,891 in Geekbench OpenCL, against 201,096 for the A100 SXM4 40 GB. That is a decisive 66.5% advantage for the Hopper-based card, placing it in the 100th percentile of all GPUs, while the older Ampere part sits at the 98th percentile. The H200 NVL’s nearest rival, the NVIDIA B200, posts a higher average score of 345,482, meaning the H200 trails that newer part by 3.1%, but it leads the AMD Instinct MI300X by 5.3% and the NVIDIA B300 SXM6 AC by 9.4% in the same test grouping.

Head-to-Head Benchmarks

The only direct benchmark comparison available is Geekbench OpenCL, and the result is unambiguous. The H200 NVL scores 334,891, while the A100 SXM4 40 GB scores 201,096. The delta between them is 66.5%, a margin that dwarfs the differences seen among the H200’s own nearest rivals. For context, the H200’s closest competitor, the NVIDIA B200, is only 3.1% ahead, and the next closest, the B300 SXM6 AC, is 9.4% ahead. The gap between the H200 and the A100 is thus roughly seven times larger than the gap between the H200 and the B200.

The A100 SXM4 40 GB also has a Geekbench Vulkan result of 173,198, which is lower than its own OpenCL score, indicating that its compute throughput is not the limiting factor in all APIs. The H200 has no Vulkan result listed, so no cross-API comparison is possible. However, the OpenCL numbers alone tell the story: the H200’s 66.5% lead is not incremental—it is transformative. The A100’s nearest rivals, such as the NVIDIA RTX 5000 Ada Generation at 184,664 and the A100 SXM4 80 GB at 183,725, are all within 3.7% of its score, showing that the A100 is at parity with its contemporaries. The H200, by contrast, sits in a class above its direct predecessor and only trails the newest Blackwell parts by single digits.

Digging into the architecture explains why. The H200 has a raw FP32 throughput of 60.32 TFLOPS, more than three times the A100’s 19.49 TFLOPS. Its FP16 performance of 120.6 TFLOPS (2:1) also outstrips the A100’s 77.97 TFLOPS (4:1), though the ratio difference matters: the H200’s 2:1 rate indicates it maintains full FP16 throughput without a double-pumped penalty that the A100’s 4:1 ratio implies. Texture rate follows the same pattern, with the H200 at 942.5 GTexel/s versus 609.1 GTexel/s for the A100. Pixel rate is the one metric where the A100 wins outright: 225.6 GPixel/s versus 42.84 GPixel/s, a consequence of its 160 ROPs against the H200’s 24. This inversion is noteworthy because it shows the H200 is not a universal upgrade—it trades rasterization-heavy resources for compute density.

Where Each One Wins

The H200 NVL wins in every compute-centric category that matters for modern AI and high-performance computing workloads. Its FP32 and FP16 throughput are 3.1x and 1.5x the A100’s respective figures, making it the clear choice for training, inference, and scientific simulation. Memory bandwidth is another decisive win: the H200’s 4.89 TB/s is over three times the A100’s 1.56 TB/s, and it pairs that with 141 GB of HBM3e against the A100’s 40 GB of HBM2e. For large model weights or datasets that exceed 40 GB, the H200’s capacity alone is a practical advantage that no benchmark score can fully capture. The H200 also has 16,896 shading units versus 6,912, and 528 tensor cores versus 432, reinforcing its lead in parallel compute.

The A100 SXM4 40 GB, however, retains a niche in rasterization and pixel-heavy tasks. Its pixel rate of 225.6 GPixel/s is 5.3x higher than the H200’s, and its 160 ROPs give it a structural edge for any workload that writes to framebuffers. The A100 also has a higher texture-to-shader ratio in practical terms: 432 TMUs on 6,912 shaders versus 528 TMUs on 16,896 shaders, so the H200 is less texture-bound per compute unit. For anyone running visualization or ray-traced rendering pipelines that depend on pixel throughput (and no RT cores are listed for either), the A100’s ROP advantage is the only measurable win it holds. The A100 is also end-of-life, whereas the H200 is active, which means availability and longevity favor the newer part.

Architecture Differences

The H200 NVL is built on TSMC’s 5 nm process, while the A100 SXM4 40 GB uses TSMC’s 7 nm node. The H200’s GH100 die packs 80,000 million transistors on an 814 mm² die, yielding a density of 98.3M transistors per mm². The A100’s GA100 die is slightly larger at 826 mm² but houses only 54,200 million transistors, for a density of 65.6M/mm². That density gap is the root of the performance difference: the H200 fits 2.44x more transistors into a nearly identical physical area.

Memory architecture differs dramatically. The H200 uses HBM3e across a 6144-bit bus, delivering 4.89 TB/s of bandwidth and a 141 GB capacity. The A100 uses HBM2e across a 5120-bit bus, which yields only 1.56 TB/s and 40 GB. The H200 also runs faster clocks across the board: base 1365 MHz and boost 1785 MHz, versus 1095 MHz base and 1410 MHz boost for the A100. Memory clock is 1593 MHz (6.4 Gbps effective) on the H200, versus 1215 MHz (2.4 Gbps effective) on the A100. The H200’s bus interface is PCIe 5.0 x16, while the A100 is PCIe 4.0 x16, doubling the potential host transfer rate.

Power and physical specs also diverge. The H200 draws 600 W and requires an 8-pin EPS connector, while the A100 is a 400 W SXM module with no power connectors (power is supplied through the socket). The H200 is a dual-slot PCIe card measuring 267 mm long and 111 mm tall, whereas the A100 is an SXM module with no listed dimensions. Neither card has display outputs, and both lack DirectX, OpenGL, and Vulkan API support (the H200 lists these as N/A, the A100 as null). The H200’s suggested PSU is 1000 W, versus 800 W for the A100. The H200 launched in November 2024, while the A100 launched in May 2020, and the A100’s production status is end-of-life.

FAQ

Q: How much faster is the H200 NVL than the A100 SXM4 40 GB in OpenCL?

A: The H200 NVL scores 334,891 in Geekbench OpenCL, versus 201,096 for the A100, a 66.5% advantage.

Q: Does the A100 have any performance advantage over the H200?

A: Yes, in pixel rate. The A100 delivers 225.6 GPixel/s and 160 ROPs, versus 42.84 GPixel/s and 24 ROPs for the H200, making it better suited for rasterization-heavy tasks.

Q: What is the memory capacity difference between the two?

A: The H200 has 141 GB of HBM3e, while the A100 has 40 GB of HBM2e. The H200 also has higher bandwidth at 4.89 TB/s versus 1.56 TB/s.

Q: Which card has a higher transistor density?

A: The H200 NVL has a density of 98.3M transistors per mm² on a 5 nm process, versus 65.6M/mm² for the A100 on a 7 nm process.

Q: Are both cards still in production?

A: No. The H200 NVL is listed as active, while the A100 SXM4 40 GB is end-of-life.

Q: How does the H200 compare to the B200?

A: The H200’s average benchmark score is 334,891, and the B200’s is 345,482, meaning the B200 is 3.1% ahead.

The Verdict

The data is clear: the NVIDIA H200 NVL is the superior compute accelerator. Its 66.5% lead in OpenCL, 3.1x FP32 throughput, and 3.1x memory bandwidth make it the default choice for any AI training, inference, or HPC workload that fits within its 141 GB memory pool. The H200 also sits at the 100th percentile of all GPUs, while the A100 is at the 98th, so the H200 is not just better than the A100—it is among the very best parts ever measured, trailing only the B200 and B300 by single-digit percentages.

The A100 SXM4 40 GB is a different animal. Its 98th percentile ranking means it remains competitive with its immediate peers like the RTX 5000 Ada Generation and the A100 80 GB, but it cannot match the H200’s compute headroom. Its only measurable win is pixel rate, which is a niche advantage for graphics-style workloads that are unlikely to be the primary use case for either card, given their lack of display outputs. The A100’s 40 GB memory is also a hard constraint for modern large models, while the H200’s 141 GB removes that bottleneck entirely.

Pick the H200 NVL if your workload is compute-bound and you need maximum FP32/FP16 throughput, the largest memory footprint, or the fastest memory bandwidth. Pick the A100 SXM4 40 GB only if you have a specific need for high pixel fill rates or ROP count, or if you are constrained by power (400 W versus 600 W) and cannot accommodate the H200’s dual-slot PCIe form factor. For everything else, the H200’s 66.5% benchmark lead is the single most decisive statistic in this comparison, and it dictates the verdict without ambiguity.

DETAILED SPECIFICATIONS

SPECIFICATION
A100 SXM4 40 GB
H200 NVL
Core Specs
Shading Units
6,912
16,896 +144.4%
Shaders
6,912
16,896 +144.4%
TMUs
432
528 +22.2%
ROPs
160
24 -85.0%
SM Count
108
132 +22.2%
Clocks
Base Clock
1095 MHz
1365 MHz
Boost Clock
1410 MHz
1785 MHz
Memory Clock
1215 MHz 2.4 Gbps effective
1593 MHz 6.4 Gbps effective
Memory
Memory Size
40 GB
141 GB
VRAM (MB)
40,960
144,384 +252.5%
Memory Type
HBM2e
HBM3e
Memory Bus
5120 bit
6144 bit
Bandwidth
1.56 TB/s
4.89 TB/s
Cache
L1 Cache
192 KB (per SM)
256 KB (per SM)
L2 Cache
40 MB
50 MB
Performance
Pixel Rate
225.6 GPixel/s
42.84 GPixel/s
Texture Rate
609.1 GTexel/s
942.5 GTexel/s
FP32 (TFLOPS)
19.49 TFLOPS
60.32 TFLOPS
FP64 (TFLOPS)
9.746 TFLOPS (1:2)
30.16 TFLOPS (1:2)
FP16 (TFLOPS)
77.97 TFLOPS (4:1)
120.6 TFLOPS (2:1)
AI/RT
Tensor Cores
432
528 +22.2%
BF16
311.84 TFLOPS (16:1)
—
TF32
155.92 TFLOPs (8:1)
—
Power
TDP
400 W
600 W
TDP (W)
400
600 +50.0%
Suggested PSU
800 W
1000 W
Power Connectors
None
8-pin EPS
Architecture
Architecture
Ampere
Hopper
GPU Name
GA100
GH100
Generation
Server Ampere (Axx)
Server Hopper (Hxx)
Process Size
7 nm
5 nm
Transistors
54,200 million
80,000 million
Die Size
826 mm²
814 mm²
Foundry
TSMC
TSMC
Density
65.6M / mm²
98.3M / mm²
API Support
OpenCL
3.0
3.0
CUDA
8.0
9.0
Physical
Slot Width
SXM Module
Dual-slot
Length
—
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
No outputs
No outputs
Bus Interface
PCIe 4.0 x16
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
Tesla Turing
Server Ada
Successor
Server Ada
Server Blackwell
View A100 SXM4 40 GB Details View H200 NVL Details