Intel HD Graphics P530 vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison
Intel HD Graphics P530
GeForce RTX 5060 Ti 8 GB
PERFORMANCE BENCHMARKS
Analysis: Intel HD Graphics P530 vs NVIDIA GeForce RTX 5060 Ti 8 GB
The Verdict
The NVIDIA GeForce RTX 5060 Ti 8 GB and Intel HD Graphics P530 are not competitors in any meaningful sense; the data positions them at opposite ends of the graphics spectrum. The RTX 5060 Ti is a discrete, active-production graphics card built for modern gaming and compute, while the HD Graphics P530 is an end-of-life integrated processor from 2015. The RTX 5060 Ti holds a decisive advantage in every benchmark category present in the data, with its average benchmark score of 4901 versus the Intel part's 4560. That said, the Intel HD Graphics P530 is not without a niche: its 15 W TDP and integrated design make it suitable for basic display output and legacy workloads where a discrete card is impractical. For anyone assembling a system for gaming, content creation, or GPU-accelerated compute, the RTX 5060 Ti is the only viable choice from this data. For ultra-low-power, embedded, or office systems where 3D performance is irrelevant, the HD Graphics P530's integrated nature and minimal power draw are its sole advantages.
The RTX 5060 Ti's percentile ranking of 29 among all GPUs, despite its high absolute scores, reflects a benchmark pool dominated by far more powerful cards; its nearest rivals are the AMD FirePro W5130M (average 4904, delta -0.1%) and NVIDIA GeForce GTS 450 (average 4893, delta 0.2%), which are all older or lower-tier parts. The Intel HD Graphics P530, with a percentile of 26, sits near the same percentile tier, but its nearest rivals — AMD Radeon RX 560 (average 4569, delta -0.2%) and AMD FirePro W4190M (average 4505, delta 1.2%) — are again different classes of hardware. The verdict is unambiguous: if you need to render anything beyond a desktop, choose the RTX 5060 Ti. If you need a GPU that costs nothing extra and consumes negligible power, the HD Graphics P530 exists for that purpose only.
Architecture Differences
The architectural gap between these two parts is generational and fundamental. The RTX 5060 Ti is built on NVIDIA's Blackwell 2.0 architecture using a 5 nm process at TSMC, with a GB206 chip containing 21,900 million transistors on a 181 mm² die. The Intel HD Graphics P530 uses Intel's Generation 9.0 architecture (Skylake GT2) on a 14 nm+ process, with a 123 mm² die and no disclosed transistor count. The RTX 5060 Ti features 4608 shading units, 144 texture mapping units, and 48 raster output pipelines, along with 36 ray tracing cores and 144 tensor cores — none of which exist on the Intel part. The Intel HD Graphics P530 has just 192 shading units, 16 TMUs, and 3 ROPs.
Memory architecture is equally divergent. The RTX 5060 Ti uses 8 GB of GDDR7 memory on a 128-bit bus, delivering 448.0 GB/s of bandwidth. The Intel part relies on system-shared memory, with its bandwidth described as "System Dependent" — a fundamental limitation for any graphics workload. Clock speeds reflect the power envelope difference: the RTX 5060 Ti boosts to 2572 MHz with a 2407 MHz base, while the Intel part runs at a 350 MHz base and 1000 MHz boost. The RTX 5060 Ti also supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, whereas the Intel part maxes out at DirectX 12 (12_1) and Vulkan 1.3. The RTX 5060 Ti is a dual-slot card with a 180 W TDP requiring a 450 W power supply and a single 8-pin connector; the Intel HD Graphics P530 is an IGP with a 15 W TDP and no power connectors, using a Ring Bus interface.
Head-to-Head Benchmarks
Direct benchmark comparisons are limited because the two parts share no common test in the data. The RTX 5060 Ti has results across 3DMark Steel Nomad (DX12), PassMark DirectX 9/10/11/12, PassMark G2D, G3D, and GPU Compute. The Intel HD Graphics P530 has results only for Geekbench OpenCL and Vulkan. Despite this, the available numbers tell a clear story.
In the RTX 5060 Ti's strongest synthetic result, the PassMark G3D score of 21981 dwarfs its own average of 4901 by a factor of roughly 4.5x, indicating that its average is dragged down by other tests. Its PassMark GPU Compute score of 11365 shows substantial compute throughput. The Intel part's Geekbench OpenCL score of 4549 and Vulkan score of 4571 are close to its average of 4560, suggesting consistent but low-level performance. The RTX 5060 Ti's average score of 4901 is 7.5% higher than the Intel part's 4560, but that comparison understates the real gap because the tests are different. The RTX 5060 Ti's PassMark G3D score of 21981 is in a different universe from anything the Intel part could produce based on its 384.0 GFLOPS FP32 throughput versus the RTX 5060 Ti's 23.70 TFLOPS.
In terms of raw throughput, the RTX 5060 Ti delivers 61.7x the FP32 performance (23.70 TFLOPS vs 384.0 GFLOPS), 123.5 GPixel/s versus 3.000 GPixel/s in pixel rate, and 370.4 GTexel/s versus 16.00 GTexel/s in texture rate. The RTX 5060 Ti's memory bandwidth of 448.0 GB/s is effectively infinite compared to the Intel part's system-dependent shared memory. The RTX 5060 Ti also leads in API support: DirectX 12 Ultimate (12_2) vs 12 (12_1), and Vulkan 1.4 vs 1.3. Both support OpenGL 4.6.
FAQ
Q: Which GPU has the higher average benchmark score?
A: The NVIDIA GeForce RTX 5060 Ti 8 GB has an average benchmark score of 4901, while the Intel HD Graphics P530 scores 4560, a difference of 341 points (approximately 7.5%).
Q: What is the most significant architectural advantage of the RTX 5060 Ti?
A: The RTX 5060 Ti features dedicated ray tracing cores (36) and tensor cores (144), which the Intel HD Graphics P530 lacks entirely. It also uses 8 GB of GDDR7 memory with 448.0 GB/s bandwidth versus the Intel part's system-shared memory.
Q: Is the Intel HD Graphics P530 still in production?
A: No. The production status for the Intel HD Graphics P530 is "End-of-life," while the RTX 5060 Ti is listed as "Active" production.
Q: How do their power requirements differ?
A: The RTX 5060 Ti has a 180 W TDP and requires a 450 W power supply with a single 8-pin connector. The Intel HD Graphics P530 has a 15 W TDP, no power connectors, and is an integrated GPU (IGP).
Q: Which GPU has better DirectX support?
A: The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), while the Intel HD Graphics P530 supports DirectX 12 (12_1). The RTX 5060 Ti also supports Vulkan 1.4 versus Vulkan 1.3 on the Intel part.
Q: What are the closest rivals for each GPU according to benchmark data?
A: The RTX 5060 Ti's nearest rival is the AMD FirePro W5130M (average 4904, delta -0.1%), while the Intel HD Graphics P530's nearest rival is the AMD Radeon RX 560 (average 4569, delta -0.2%).
Where Each One Wins
The RTX 5060 Ti wins in every performance domain measured. Its PassMark G3D score of 21981 indicates strong general 3D rendering capability, suitable for modern games and GPU-accelerated applications. Its PassMark GPU Compute score of 11365 shows significant compute headroom for tasks like rendering, simulation, or machine learning inference (aided by its 144 tensor cores). The 3DMark Steel Nomad DX12 score of 4019 confirms modern API efficiency. The RTX 5060 Ti's 23.70 TFLOPS FP32 and 23.70 TFLOPS FP16 (1:1 ratio) make it a versatile compute device, and its 448.0 GB/s memory bandwidth prevents bottlenecks in texture-heavy workloads.
The Intel HD Graphics P530 wins only in power efficiency and integration. Its 15 W TDP is 165 W lower than the RTX 5060 Ti's 180 W. It requires no additional power connectors, no dedicated power supply recommendation, and fits in any motherboard with a compatible CPU (Ring Bus interface). Its system-shared memory means no dedicated VRAM allocation is needed. For basic office productivity, video playback, or legacy software that expects a DirectX 12 (12_1) GPU, the HD Graphics P530 is functionally adequate. Its Geekbench OpenCL score of 4549 and Vulkan score of 4571 show it can handle light compute offload, but those numbers are in the same range as its average — meaning it has no hidden performance headroom.
Specification Differences
| Specification | NVIDIA GeForce RTX 5060 Ti 8 GB | Intel HD Graphics P530 |
|---|---|---|
| Architecture | Blackwell 2.0 | Generation 9.0 |
| Process Node | 5 nm (TSMC) | 14 nm+ (Intel) |
| Transistors | 21,900 million | Not disclosed |
| Die Size | 181 mm² | 123 mm² |
| Base Clock | 2407 MHz | 350 MHz |
| Boost Clock | 2572 MHz | 1000 MHz |
| Memory Size | 8 GB GDDR7 | System Shared |
| Memory Bus | 128 bit | System Shared |
| Memory Bandwidth | 448.0 GB/s | System Dependent |
| Shading Units | 4608 | 192 |
| TMUs | 144 | 16 |
| ROPs | 48 | 3 |
| RT Cores | 36 | None |
| Tensor Cores | 144 | None |
| Pixel Rate | 123.5 GPixel/s | 3.000 GPixel/s |
| Texture Rate | 370.4 GTexel/s | 16.00 GTexel/s |
| FP32 | 23.70 TFLOPS | 384.0 GFLOPS |
| FP16 | 23.70 TFLOPS (1:1) | 768.0 GFLOPS (2:1) |
| TDP | 180 W | 15 W |
| Slot Width | Dual-slot | IGP |
| Power Connectors | 1x 8-pin | None |
| Suggested PSU | 450 W | None |
| Bus Interface | PCIe 5.0 x8 | Ring Bus |
| Display Outputs | 1x HDMI 2.1b, 3x DisplayPort 2.1b | Motherboard Dependent |
| DirectX | 12 Ultimate (12_2) | 12 (12_1) |
| OpenGL | 4.6 | 4.6 |
| Vulkan | 1.4 | 1.3 |
| Production Status | Active | End-of-life |
| Release Date | 2025-04-15 | 2015-08-31 |
| Launch MSRP | 379 USD | None |
The RTX 5060 Ti also offers a higher transistor density of 121.0M / mm² versus no disclosed figure for the Intel part. Its dimensions are 241 mm in length, 111 mm in height, and 40 mm in width, whereas the Intel IGP has no physical dimensions because it is integrated into the processor. The RTX 5060 Ti's memory clock is 1750 MHz (28 Gbps effective), while the Intel part's memory clock is simply "System Shared." In every measurable specification where both parts have data, the RTX 5060 Ti is superior by orders of magnitude.