Intel HD Graphics P530 vs NVIDIA GeForce RTX 5060 Ti 16 GB Comparison

Head-to-Head Benchmarks

The two products in this comparison occupy entirely different performance strata. The NVIDIA GeForce RTX 5060 Ti 16 GB delivers an average benchmark score of 4970, while the Intel HD Graphics P530 records an average of 4560. That difference of 410 points represents a substantial gap, but the nature of the comparison is complicated by the fact that the two products were tested under different benchmark suites.

The RTX 5060 Ti was evaluated across a broader set of DirectX tests. Its strongest result comes from Passmark G3D, where it scores 22618, a figure that dwarfs its other recorded outputs. The Passmark GPU Compute score of 11224 shows strong general-purpose throughput, while the legacy DirectX tests tell a different story: Passmark DirectX 9 scores 238, DirectX 11 scores 219, DirectX 10 scores 144, and DirectX 12 scores 89. The 3DMark Steel Nomad DX12 result of 4019 provides a modern gaming workload measurement.

The Intel HD Graphics P530 was only measured with Geekbench tests, scoring 4549 in OpenCL and 4571 in Vulkan. These are the only two data points recorded for this integrated processor, and they are remarkably close to one another, differing by just 22 points. This near-identical pairing suggests the iGPU's performance is consistent across compute and graphics APIs.

When comparing the averages, the RTX 5060 Ti sits 9% above the Intel part. However, this headline figure masks the fact that the RTX 5060 Ti's Passmark G3D result is 22618, which is roughly five times the magnitude of its own average score. The Intel part has no equivalent high-water mark in its recorded results.

The percentile rankings place both products in the lower half of the database. The RTX 5060 Ti sits at the 29th percentile of all GPUs, while the Intel HD Graphics P530 sits at the 26th percentile. Despite the RTX 5060 Ti's modern architecture and dedicated memory, its percentile placement indicates that the database records it as a mid-to-low tier performer relative to the full range of GPUs tracked.

Looking at nearest rivals, the RTX 5060 Ti's average of 4970 places it within 0.8% of the AMD Radeon R7 M360 and AMD Radeon R7 M265, both of which average 4931 and 4929 respectively. It trails the NVIDIA Quadro 4000 by 0.2% (4979) and the AMD Radeon R7 Graphics by 0.6% (4998). These are extremely tight margins, all within a single percentage point.

The Intel HD Graphics P530's nearest rivals are similarly clustered. Its average of 4560 sits 0.2% behind the AMD Radeon RX 560 (4569), 0.4% behind the AMD Radeon R5 M230 (4577), and 1.3% behind the NVIDIA Quadro M3000M (4621). It leads the AMD FirePro W4190M by 1.2%, which averages 4505.

The database records no head-to-head benchmark results between these two specific products, and neither product has a win count in direct comparisons. The available data consists entirely of their respective standalone benchmark suites.

Architecture Differences

The architectural gap between these two products is generational and fundamental. The NVIDIA GeForce RTX 5060 Ti 16 GB uses the GB206 chip built on Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. The Intel HD Graphics P530 uses the Skylake GT2 chip based on Generation 9.0 architecture, fabricated on Intel's 14 nm+ process.

The transistor counts reflect this divide. The RTX 5060 Ti packs 21,900 million transistors onto a die measuring 181 mm², yielding a transistor density of 121.0 million per mm². The Intel part has no recorded transistor count, but its die size is 123 mm². The density difference is stark: the NVIDIA chip crams over 121 million transistors into each square millimeter, while the Intel die is smaller in area but built on a much older, less dense process.

Memory configurations could not be more different. The RTX 5060 Ti comes with 16 GB of GDDR7 memory on a 128 bit bus, delivering 448.0 GB/s of bandwidth. The Intel HD Graphics P530 uses system shared memory, with its bus width, memory type, and bandwidth all listed as "System Shared" or "System Dependent." This means the Intel iGPU has no dedicated memory resources and must compete with the CPU for system RAM access.

Clock speeds show the RTX 5060 Ti operating at a 2407 MHz base and 2572 MHz boost, with memory clocked at 1750 MHz (28 Gbps effective). The Intel part runs at a 350 MHz base and 1000 MHz boost, with its memory clock listed as "System Shared." The NVIDIA part's boost clock is more than 2.5 times the Intel's boost clock.

Compute resources differ by an order of magnitude. The RTX 5060 Ti has 4608 shading units, 144 texture mapping units, 48 raster output units, 36 ray tracing cores, and 144 tensor cores. The Intel HD Graphics P530 has 192 shading units, 16 TMUs, and 3 ROPs, with no ray tracing or tensor cores recorded. The shading unit count alone is 24 times higher on the NVIDIA part.

Pixel and texture rates reinforce the gap. The RTX 5060 Ti achieves 123.5 GPixel/s and 370.4 GTexel/s. The Intel part manages 3.000 GPixel/s and 16.00 GTexel/s. The NVIDIA card is 41 times faster in pixel throughput and 23 times faster in texture throughput.

Floating point performance shows a similar chasm. The RTX 5060 Ti delivers 23.70 TFLOPS in FP32 and the same 23.70 TFLOPS in FP16 with a 1:1 ratio. The Intel part delivers 384.0 GFLOPS in FP32 and 768.0 GFLOPS in FP16 with a 2:1 ratio. The NVIDIA card is roughly 62 times faster in FP32.

Power characteristics diverge as expected for a discrete versus integrated solution. The RTX 5060 Ti has a 180 W TDP, requires a single 8-pin power connector, and recommends a 450 W power supply. The Intel HD Graphics P530 has a 15 W TDP, uses no power connectors, and has no suggested PSU because it is an IGP that draws power from the motherboard. The NVIDIA card consumes 12 times the power of the Intel part.

The RTX 5060 Ti supports PCIe 5.0 x8, while the Intel part connects via Ring Bus. Display outputs on the NVIDIA card include 1x HDMI 2.1b and 3x DisplayPort 2.1b, whereas the Intel part's outputs are motherboard dependent. API support shows the NVIDIA card at DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the Intel part reaches DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.3.

Where Each One Wins

The RTX 5060 Ti is the clear choice for any workload that stresses raw graphics throughput. Its Passmark G3D score of 22618 indicates strong rasterization performance, and its 3DMark Steel Nomad DX12 result of 4019 demonstrates modern API capability. The 448.0 GB/s of dedicated GDDR7 bandwidth eliminates any memory contention issues that plague shared-memory designs.

The Intel HD Graphics P530 wins on power efficiency in absolute terms. Its 15 W TDP is a fraction of the RTX 5060 Ti's 180 W, making it suitable for systems where power draw is the primary constraint. Its Geekbench results of 4549 in OpenCL and 4571 in Vulkan show that it handles compute and graphics workloads with reasonable consistency for an integrated part.

For legacy DirectX workloads, the RTX 5060 Ti's Passmark scores show diminishing returns. Its DirectX 9 score of 238, DirectX 10 score of 144, and DirectX 11 score of 219 are all low relative to its G3D result, suggesting the card's modern architecture does not translate to strong performance in older APIs. The Intel part has no equivalent legacy DirectX measurements in this database.

The RTX 5060 Ti's compute advantage is clear from the Passmark GPU Compute score of 11224, which is nearly half its G3D score. This indicates balanced performance between graphics and general-purpose compute. The Intel part's Geekbench OpenCL score of 4549 shows modest compute capability.

Gaming workloads favor the RTX 5060 Ti overwhelmingly. The 36 ray tracing cores and 144 tensor cores provide hardware acceleration for features the Intel part cannot handle at all. The 16 GB of GDDR7 memory allows for large texture sets and high-resolution assets, while the Intel part's system shared memory imposes severe limitations.

FAQ

Q: How much faster is the RTX 5060 Ti than the Intel HD Graphics P530 in average benchmark score?

A: The RTX 5060 Ti has an average benchmark score of 4970, while the Intel HD Graphics P530 averages 4560. The NVIDIA part is approximately 9% higher in average score.

Q: What is the performance difference in nearest rival comparisons?

A: The RTX 5060 Ti's average of 4970 places it 0.8% behind the AMD Radeon R7 M360 and 0.6% behind the AMD Radeon R7 Graphics, while leading the AMD Radeon R7 M265 by 0.8%. The Intel HD Graphics P530's average of 4560 places it 1.3% behind the NVIDIA Quadro M3000M and 0.2% behind the AMD Radeon RX 560, while leading the AMD FirePro W4190M by 1.2%.

Q: What memory configurations do these two products use?

A: The RTX 5060 Ti uses 16 GB of GDDR7 memory on a 128 bit bus with 448.0 GB/s bandwidth. The Intel HD Graphics P530 uses system shared memory, with bandwidth listed as system dependent.

Q: How do the shading unit counts compare?

A: The RTX 5060 Ti has 4608 shading units, 144 TMUs, and 48 ROPs. The Intel HD Graphics P530 has 192 shading units, 16 TMUs, and 3 ROPs.

Q: What is the TDP difference between the two?

A: The RTX 5060 Ti has a TDP of 180 W and requires a 450 W power supply. The Intel HD Graphics P530 has a 15 W TDP and requires no power supply specification.

Q: Which product supports ray tracing?

A: The RTX 5060 Ti includes 36 ray tracing cores and 144 tensor cores. The Intel HD Graphics P530 has no ray tracing or tensor cores recorded in its specifications.

The Verdict

The data presents an unambiguous performance hierarchy. The NVIDIA GeForce RTX 5060 Ti 16 GB outperforms the Intel HD Graphics P530 across every metric where comparable measurements exist, with an average benchmark scores of 4970 versus 4560. The architectural advantages in shading units, memory bandwidth, and compute throughput are so large that no workload redistribution could close the gap.

The RTX 5060 Ti is the appropriate choice for users who need dedicated graphics capability, hardware ray tracing acceleration, and substantial memory resources. Its 16 GB GDDR7 capacity, 448. The 23.70 TFLOPS of FP32 compute, 36 ray tracing cores, and 4608 shading units make it suitable for demanding graphics workloads across modern APIs. The launch MSRP is 429 USD, stated once here as recorded data.

The Intel HD Graphics P530, by contrast, serves a different purpose entirely. As a 15 W integrated processor with system shared memory and no dedicated graphics resources, it is suited for basic display output and light compute in power-constrained systems. Its Geekbench scores of 4549 in OpenCL and 4571 in Vulkan indicate acceptable performance for undemanding workloads that do not require the RTX 5060 Ti's capabilities. The 26th percentile percentile placement reflects its position in the low tier of the database. Users who require the RTX 5060 Ti's feature set should pick the NVIDIA part without hesitation.