Intel Arc Graphics 4 Xe Mobile vs NVIDIA GeForce RTX 5070 Ti Mobile Comparison
Intel Arc Graphics 4 Xe Mobile
GeForce RTX 5070 Ti Mobile
PERFORMANCE BENCHMARKS
Analysis: Intel Arc Graphics 4 Xe Mobile vs NVIDIA GeForce RTX 5070 Ti Mobile
Head-to-Head Benchmarks
The recorded data shows a clear and substantial performance gap between the Intel Arc Graphics 4 Xe Mobile and the NVIDIA GeForce RTX 5070 Ti Mobile. The Intel part, an integrated graphics solution built on the Panther Lake chip, carries an average benchmark score of zero, while the NVIDIA discrete GPU posts an average benchmark score of 35,435. That places the NVIDIA part in the 80th percentile of all GPUs in the database, compared to the 50th percentile for the Intel solution.
The GeForce RTX 5070 Ti Mobile delivers 17.04 TFLOPS of FP32 compute, which is roughly seven times the 2.355 TFLOPS of the Intel Arc Graphics 4 Xe Mobile. The texture rate tells a similar story: NVIDIA reaches 266.2 GTexel/s against Intel's 73.60 GTexel/s. Pixel throughput also favors the NVIDIA part by a wide margin, with 115.8 GPixel/s versus 36.80 GPixel/s.
The NVIDIA GPU's benchmark scores are the only recorded figures in the database. In Geekbench OpenCL, it scores 143,870, and in Geekbench Vulkan it scores 139,213. PassMark results further confirm its position: a G3D score of 24,004, a GPU compute score of 10,101, and older DirectX tests showing 259 in DirectX 9, 237 in DirectX 11, 151 in DirectX 10, and 102 in DirectX 12. The Intel part has no recorded benchmark scores, meaning the database shows no direct head-to-head wins for it in any test.
Relative to its nearest rivals, the NVIDIA GeForce RTX 5070 Ti Mobile sits within a tight cluster. It trails the NVIDIA Quadro GV100 by 0.2%, sits 1.2% behind the AMD Radeon Pro Duo, and is 2.4% behind the NVIDIA T1000. It leads the NVIDIA A2 by 2.1%. These deltas place the RTX 5070 Ti Mobile in a competitive middle position among professional and workstation-class GPUs, despite its mobile form factor.
The performance disparity is not marginal; it is structural. The NVIDIA part uses 5,888 shading units, 184 texture mapping units, and 80 ROPs, while the Intel solution uses 512 shading units, 32 TMUs, and 16 ROPs. The NVIDIA GPU also includes 46 ray tracing cores and 184 tensor cores, versus 4 ray tracing cores and no tensor cores for Intel. Every recorded metric points in one direction.
Where Each One Wins
The GeForce RTX 5070 Ti Mobile wins every category where data exists. Its 12 GB of GDDR7 memory on a 192-bit bus delivers 672.0 GB/s of bandwidth, a figure that dwarfs the Intel part's system-shared memory with system-dependent bandwidth. The NVIDIA GPU's boost clock of 1447 MHz, while lower than Intel's 2300 MHz boost, operates alongside far more execution resources, which explains the massive throughput advantage.
The Intel Arc Graphics 4 Xe Mobile does hold advantages in specific characteristics. Its base clock of 300 MHz and boost clock of 2300 MHz are higher than the NVIDIA part's 847 MHz base and 1447 MHz boost. The Intel chip also runs at a 25 W TDP, compared to 60 W for the NVIDIA GPU, which makes it a lower-power integrated solution. However, these are configuration differences rather than performance wins. The Intel part has no recorded benchmark scores, so the database cannot attribute any test victory to it.
For workloads that depend on raw FP32 throughput, ray tracing, or tensor operations, the NVIDIA part is the only viable option based on the data. Its 184 tensor cores and 46 RT cores provide dedicated hardware that the Intel solution lacks entirely. For memory-intensive tasks, the NVIDIA GPU's 672.0 GB/s bandwidth and dedicated 12 GB frame buffer offer a decisive edge over system-shared memory.
The Intel part's role is limited to integrated graphics duty. It uses no power connectors, employs an IGP bus interface, and shares system memory. The NVIDIA part, while also listed as IGP in slot width and lacking power connectors, uses a PCIe 5.0 x16 interface and dedicated GDDR7 memory, indicating it is a discrete-class mobile GPU.
FAQ
Q: How much faster is the NVIDIA GeForce RTX 5070 Ti Mobile than the Intel Arc Graphics 4 Xe Mobile?
A: The NVIDIA GPU records an average benchmark score of 35,435, while the Intel part has an average benchmark score of zero with no recorded test results. The NVIDIA part delivers 17.04 TFLOPS of FP32 compute versus 2.355 TFLOPS for Intel, and 266.2 GTexel/s versus 73.60 GTexel/s in texture rate.
Q: Which GPU has more shading units?
A: The NVIDIA GeForce RTX 5070 Ti Mobile has 5,888 shading units, compared to 512 shading units for the Intel Arc Graphics 4 Xe Mobile. The NVIDIA part also has 184 TMUs and 80 ROPs, versus 32 TMUs and 16 ROPs for Intel.
Q: Does the Intel Arc Graphics 4 Xe Mobile support ray tracing?
A: Yes, it includes 4 ray tracing cores. However, the NVIDIA GeForce RTX 5070 Ti Mobile includes 46 ray tracing cores, a substantially higher count.
Q: What are the memory configurations of these two GPUs?
A: The NVIDIA GeForce RTX 5070 Ti Mobile has 12 GB of GDDR7 memory on a 192-bit bus with 672.0 GB/s of bandwidth. The Intel Arc Graphics 4 Xe Mobile uses system-shared memory with system-dependent bandwidth.
Q: What is the TDP difference between the two GPUs?
A: The Intel Arc Graphics 4 Xe Mobile runs at a 25 W TDP, while the NVIDIA GeForce RTX 5070 Ti Mobile runs at a 60 W TDP. Both use no power connectors.
Q: How does the NVIDIA GPU compare to its nearest rivals in the database?
A: The GeForce RTX 5070 Ti Mobile trails the NVIDIA Quadro GV100 by 0.2%, the AMD Radeon Pro Duo by 1.2%, and the NVIDIA T1000 by 2.4%. It leads the NVIDIA A2 by 2.1%.
Specification Differences
The two GPUs differ across nearly every recorded specification. The Intel Arc Graphics 4 Xe Mobile uses the Panther Lake chip with Xe3-LPG architecture, built on a 3 nm process at Intel's foundry. The NVIDIA GeForce RTX 5070 Ti Mobile uses the GB205 chip with Blackwell 2.0 architecture, built on a 5 nm process at TSMC. The NVIDIA chip contains 31,100 million transistors on a 263 mm² die, while Intel's transistor count and die size are listed as unknown.
Clock behavior differs significantly. The Intel part has a 300 MHz base clock and a 2300 MHz boost clock. The NVIDIA part has an 847 MHz base and a 1447 MHz boost, with memory clocked at 1750 MHz at 28 Gbps effective. Memory configuration is a major split: Intel uses system-shared memory and system-dependent bandwidth, while NVIDIA uses 12 GB of GDDR7 on a 192-bit bus with 672.0 GB/s of bandwidth.
Compute resources differ across the board. Intel has 512 shading units, 32 TMUs, 16 ROPs, and 4 RT cores. NVIDIA has 5,888 shading units, 184 TMUs, 80 ROPs, and 46 RT cores. NVIDIA also has 184 tensor cores, a feature absent from the Intel part. FP32 throughput is 2.355 TFLOPS for Intel versus 17.04 TFLOPS for NVIDIA. FP16 rates are 4.710 TFLOPS at a 2:1 ratio for Intel, and 17.04 TFLOPS at a 1:1 ratio for NVIDIA.
The NVIDIA GPU uses a PCIe 5.0 x16 bus interface, while the Intel part uses an IGP interface. Both are listed as IGP in slot width with no power connectors. The NVIDIA part's TDP is 60 W, compared to 25 W for Intel. Both support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and both have portable device dependent display outputs.
Release dates also differ. The NVIDIA GeForce RTX 5070 Ti Mobile was released on 2025-02-28, while the Intel Arc Graphics 4 Xe Mobile was released on 2026-01-26. NVIDIA lists the GeForce 40 Mobile as its predecessor, while Intel has no predecessor or successor listed. Neither part has a launch MSRP in the database.
Architecture Differences
The architectural split between these two GPUs is fundamental. Intel's Xe3-LPG architecture, built on the Panther Lake chip, targets integrated graphics with a 3 nm process at Intel's own foundry. NVIDIA's Blackwell 2.0 architecture, built on the GB205 chip, targets mobile discrete graphics with a 5 nm process at TSMC. The transistor counts underline the difference: NVIDIA packs 31,100 million transistors into a 263 mm² die, achieving a density of 118.3 million transistors per square millimeter. Intel's transistor data is unknown.
Execution resource counts show NVIDIA's architecture prioritizes massive parallelism. The 5,888 shading units in the NVIDIA part dwarf the 512 in the Intel part, a ratio of over 11 to 1. The 184 tensor cores in the NVIDIA GPU enable AI and machine learning workloads; the Intel part has no tensor cores. Ray tracing support also differs heavily: 46 RT cores in the NVIDIA GPU versus 4 in the Intel part.
Memory architecture reflects the different roles. NVIDIA uses dedicated GDDR7 memory with a 192-bit bus and fixed 672.0 GB/s bandwidth. Intel relies on system-shared memory, making bandwidth system dependent. This is a design choice for an integrated part that shares resources with the host CPU, whereas the NVIDIA GPU is a discrete-class component with its own frame buffer.
The NVIDIA GPU's FP16 rate matches its FP32 rate at a 1:1 ratio, indicating full-rate FP16 execution. The Intel part runs FP16 at half the rate of its FP32 throughput, a 2:1 ratio, which is a common trade-off for lower-power integrated designs. The NVIDIA part also carries a higher TDP of 60 W, reflecting its larger execution resources and dedicated memory, while the Intel part runs at 25 W.
Both architectures support the same modern API set: DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The NVIDIA part's PCIe 5.0 x16 interface suggests it connects as a discrete device, while the Intel part's IGP interface indicates it is integrated into the host processor. The NVIDIA part also has a listed predecessor, GeForce 40 Mobile, confirming its lineage in NVIDIA's mobile lineup, whereas the Intel part has no predecessor or successor in the database.