Intel Arc A750 vs NVIDIA GeForce GTX 1060 6 GB Comparison
Intel Arc A750
GeForce GTX 1060 6 GB
PERFORMANCE BENCHMARKS
Analysis: Intel Arc A750 vs NVIDIA GeForce GTX 1060 6 GB
The NVIDIA GeForce GTX 1060 6 GB and Intel Arc A750 represent two very different eras of GPU design, and the benchmark data shows a decisive generational shift. While the GTX 1060 was a dominant force in its time, the Arc A750's raw compute and modern feature set place it in a different performance class, despite the older card holding a slightly higher percentile ranking among all GPUs.
Head-to-Head Benchmarks
The direct comparison between these two cards is brief but conclusive. In the two shared benchmark tests, the Intel Arc A750 wins both, and by enormous margins. The first test, Geekbench OpenCL, shows the Arc A750 scoring 98,554 against the GTX 1060's 32,322. This represents a 67.2% lead for the Intel card, meaning it delivers roughly three times the raw compute throughput in this API. The delta is so large that it is not a matter of tweaking settings or drivers; the architectural gulf is simply too wide.
The second test, Geekbench Vulkan, is even more lopsided. The Arc A750 posts 85,631 points, while the GTX 1060 manages only 18,659. The deltaPct of -78.2% indicates that the GTX 1060's score is less than a quarter of the Arc A750's output. This result is particularly telling because Vulkan is a low-level API that tends to expose raw hardware capabilities. The GTX 1060's Pascal architecture, built for a DirectX 12 era, is simply outmatched by Intel's Xe-HPG design, which was engineered for modern graphics workloads from the ground up.
Looking at the broader average benchmark scores, the gap narrows but still favors the newer card. The Arc A750 has an average benchmark score of 20,582, while the GTX 1060 sits at 21,856. This is a curious inversion: despite losing both head-to-head tests, the GTX 1060 has a higher average score. This is explained by the different benchmark suites each card was tested on. The GTX 1060's average is driven by its Geekbench scores, which are its only listed results. The Arc A750, however, has a much wider range of tests, including several Passmark entries where it scores relatively low (e.g., 65 in DirectX 10, 70 in DirectX 12). These low scores drag down its average, even though its peak performance is far higher. The data suggests the GTX 1060 benefits from a narrower, more favorable test set.
In terms of percentile ranking, the GTX 1060 sits at the 67th percentile, while the Arc A750 is at the 66th. This is nearly identical, placing both cards in the upper-midrange of all GPUs. However, this ranking is likely influenced by the different test sets and the fact that the GTX 1060 has been on the market much longer, accumulating results from legacy benchmarks. The head-to-head data is unambiguous: the Arc A750 is the faster card in compute and modern API performance.
FAQ
Q: Is the Intel Arc A750 faster than the GTX 1060 in every benchmark?
A: Yes, in the two benchmarks where both cards were tested head-to-head, the Intel Arc A750 wins decisively. In Geekbench OpenCL, the Arc A750 scores 98,554 versus the GTX 1060's 32,322, and in Geekbench Vulkan, it scores 85,631 versus 18,659.
Q: Why does the GTX 1060 have a higher average benchmark score?
A: The GTX 1060's average benchmark score is 21,856, compared to the Arc A750's 20,582. This is because the GTX 1060's average is calculated from only three Geekbench results, all of which are relatively strong. The Arc A750's average includes multiple Passmark tests where it scores much lower (e.g., 65 in DirectX 10), which pulls its average down despite its high Geekbench scores.
Q: What is the difference in memory bandwidth?
A: The Intel Arc A750 has a significant advantage. It features 8 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 512.0 GB/s. The GTX 1060 has 6 GB of GDDR5 on a 192-bit bus, providing 192.2 GB/s. This is a 2.66x difference in raw bandwidth.
Q: Does the Arc A750 support hardware ray tracing?
A: Yes. The Intel Arc A750 has 28 dedicated RT cores, while the GTX 1060 has none. This is a fundamental architectural difference that enables hardware-accelerated ray tracing on the Intel card, a feature the older NVIDIA card cannot offer.
Q: Which card has a higher transistor count?
A: The Intel Arc A750 has 21,700 million transistors on its DG2-512 chip. The GTX 1060 has 4,400 million transistors on its GP106 chip. This represents a nearly 5x increase in transistor count for the Intel card.
Q: What are the power supply requirements for each card?
A: The GTX 1060 has a TDP of 120 W and requires a 300 W power supply with a single 6-pin connector. The Arc A750 has a TDP of 225 W and requires a 550 W power supply with both a 6-pin and an 8-pin connector.
Where Each One Wins
The data shows a clear split in use cases. The Intel Arc A750 wins in every scenario where raw performance and modern features matter. Its 17.20 TFLOPS of FP32 compute dwarfs the GTX 1060's 4.375 TFLOPS, making it the obvious choice for compute-heavy tasks, modern game engines, and any workload that leverages Vulkan or OpenCL. The 28 RT cores also make it the only option for ray-traced gaming. The 512.0 GB/s memory bandwidth ensures that high-resolution textures and data-heavy scenes are handled without bottlenecking.
The NVIDIA GeForce GTX 1060 6 GB, however, is not without its niche. Its 120 W TDP means it draws significantly less power than the Arc A750's 225 W. For a builder with an older or smaller power supply, or for a system where heat and noise are primary concerns, the GTX 1060 is the more manageable card. Its 250 mm length and dual-slot design also make it a safer fit for smaller cases, whereas the Arc A750's dimensions are not listed, potentially indicating a larger physical footprint. The GTX 1060's 67th percentile vs. the Arc A750's 66th also suggests that in legacy DirectX titles, the older card may hold its own surprisingly well, though the head-to-head data does not cover those specific tests.
Specification Differences
The specification sheets show a generational leap in almost every category. The GTX 1060 has 1,280 shading units, 80 TMUs, and 48 ROPs. The Arc A750 has 3,584 shading units, 224 TMUs, and 112 ROPs—roughly 2.8x, 2.8x, and 2.3x more, respectively. The clock speeds also differ: the GTX 1060 boosts to 1709 MHz, while the Arc A750 boosts to 2400 MHz. Memory is another major divider, with the GTX 1060 using 6 GB of GDDR5 on a 192-bit bus, while the Arc A750 uses 8 GB of GDDR6 on a 256-bit bus. The power connectors differ as well: the GTX 1060 uses a single 6-pin, while the Arc A750 requires a 6-pin and an 8-pin. The bus interface also advances, with the GTX 1060 on PCIe 3.0 x16 and the Arc A750 on PCIe 4.0 x16. Display outputs differ too: the GTX 1060 offers one DVI, one HDMI 2.0, and three DisplayPort 1.4a, while the Arc A750 offers one HDMI 2.1 and three DisplayPort 2.0.
Architecture Differences
The architectural gulf is the core story here. The NVIDIA GTX 1060 uses the Pascal architecture on a 16 nm TSMC process, featuring a 200 mm² die with 4,400 million transistors. The Intel Arc A750 uses the Xe-HPG architecture on a 6 nm TSMC process, with a 406 mm² die containing 21,700 million transistors. This translates to a transistor density of 53.4M per mm² for Intel versus 22.0M per mm² for NVIDIA, showing a much more efficient packing of logic. The GTX 1060 is built for DirectX 12 (12_1) and has no RT or tensor cores. The Arc A750 supports DirectX 12 Ultimate (12_2) and includes 28 RT cores for hardware ray tracing. The compute capabilities are starkly different: the GTX 1060 offers 4.375 TFLOPS FP32 and a paltry 68.36 GFLOPS FP16 (1:64 ratio), while the Arc A750 offers 17.20 TFLOPS FP32 and 34.41 TFLOPS FP16 (2:1 ratio). The FP16 difference is particularly notable—the Intel card can process half-precision data at twice the rate of its full-precision, a feature that modern AI and compute workloads increasingly rely on.
The Verdict
The data is unambiguous: the Intel Arc A750 is the superior GPU for virtually any modern workload. It wins both head-to-head benchmarks by margins of 67.2% and 78.2%, offering multiple times the compute performance, twice the memory bandwidth, and hardware ray tracing. Its 17.20 TFLOPS FP32 and 34.41 TFLOPS FP16 make it a far more capable compute engine. Any user building a new system or upgrading for gaming, content creation, or general compute should choose the Arc A750 without hesitation.
The NVIDIA GeForce GTX 1060 6 GB retains a narrow appeal. Its 120 W TDP and single 6-pin power connector make it a low-power option that can slot into older systems without PSU upgrades. Its 250 mm length is a known quantity for case compatibility. However, its performance is a fraction of the Arc A750's, and it lacks modern features like ray tracing and high-bandwidth GDDR6 memory. For a legacy system where power draw is critical and performance demands are modest, the GTX 1060 remains a serviceable choice. For everyone else, the Arc A750's benchmark results make it the clear pick.