AMD Ryzen Z2 GPU vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

# AMD Ryzen Z2 GPU vs NVIDIA GeForce RTX 5060 Ti 8 GB

The AMD Ryzen Z2 GPU and NVIDIA GeForce RTX 5060 Ti 8 GB occupy opposite ends of the graphics spectrum, one a 28 W console-class processor with integrated graphics and the other a 180 W discrete desktop card. The recorded data shows a 2.86x gap in FP32 throughput (8.294 TFLOPS vs 23.70 TFLOPS) and a 3.73x gap in memory bandwidth (119.9 GB/s vs 448.0 GB/s), but the comparison is not simply about raw speed. The Ryzen Z2 GPU targets a completely different power envelope and form factor, while the RTX 5060 Ti targets traditional desktop rendering with a full suite of benchmark results.

Where Each One Wins

The RTX 5060 Ti 8 GB wins every recorded benchmark in the database. Its PassMark G3D score of 21981 places it far above the Ryzen Z2 GPU, which has no recorded benchmark scores at all. The RTX 5060 Ti also holds the advantage in the 3DMark Steel Nomad DX12 test with a score of 4019, a result that reflects modern API rendering performance. The PassMark GPU Compute score of 11365 further demonstrates the NVIDIA card's advantage in compute-heavy workloads, while the Ryzen Z2 GPU has no comparable entry.

The Ryzen Z2 GPU wins on the basis of power consumption and integration. Its 28 W TDP allows operation without any power connectors, and its single USB Type-C display output suggests a mobile or handheld-oriented design. The RTX 5060 Ti requires a 180 W TDP, a 450 W suggested PSU, a 1x 8-pin power connector, and a dual-slot physical footprint (241 mm length, 111 mm height, 40 mm width). The data indicates that the Ryzen Z2 GPU is designed for scenarios where the RTX 5060 Ti cannot physically exist: low-power, compact systems with no auxiliary power delivery.

The performance percentile data reinforces the split. The RTX 5060 Ti sits at the 29th percentile among all GPUs in the database, while the Ryzen Z2 GPU sits at the 50th percentile, despite having no benchmark scores. This discrepancy reflects the database's handling of unmeasured hardware rather than actual performance equality. The RTX 5060 Ti's average benchmark score of 4901 places it near rivals like the AMD FirePro W5130M (4904, delta -0.1%), NVIDIA GeForce GTS 450 (4893, delta 0.2%), AMD Radeon R7 M265 (4929, delta -0.6%), and AMD Radeon R7 M360 (4931, delta -0.6%). These deltas are all within 0.6%, meaning the RTX 5060 Ti's average score is statistically tied with those older, lower-end cards.

Architecture Differences

The two GPUs come from different manufacturers and different architectural generations. The AMD Ryzen Z2 GPU uses the Hawk Point chip with RDNA 3.0 architecture, built on a 4 nm process at TSMC with 25,390 million transistors on a 178 mm² die. The NVIDIA RTX 5060 Ti uses the GB206 chip with Blackwell 2.0 architecture, built on a 5 nm process at TSMC with 21,900 million transistors on a 181 mm² die. Despite the newer process node, the AMD chip packs more transistors into a slightly smaller die, yielding a transistor density of 142.6M per mm² versus 121.0M per mm² for the NVIDIA chip.

The compute resources differ substantially. The Ryzen Z2 GPU has 768 shading units, 48 texture mapping units, 32 ROPs, and 12 ray tracing cores. The RTX 5060 Ti has 4608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores. The NVIDIA card also carries dedicated tensor cores, which the AMD chip lacks entirely. This explains the RTX 5060 Ti's higher pixel rate (123.5 GPixel/s vs 86.40 GPixel/s) and texture rate (370.4 GTexel/s vs 129.6 GTexel/s).

Memory configuration is another major differentiator. The Ryzen Z2 GPU uses 16 GB of LPDDR5X on a 128-bit bus with 119.9 GB/s bandwidth. The RTX 5060 Ti uses 8 GB of GDDR7 on a 128-bit bus with 448.0 GB/s bandwidth. The AMD part offers double the capacity, but the NVIDIA part offers 3.74x the bandwidth. Clock behavior also reflects the power envelope: the Ryzen Z2 GPU runs at a base clock of 800 MHz and boost of 2700 MHz, while the RTX 5060 Ti runs at 2407 MHz base and 2572 MHz boost. The AMD chip's wide clock range indicates aggressive power management, while the NVIDIA card's narrow range suggests sustained high-frequency operation under load.

Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RTX 5060 Ti connects via PCIe 5.0 x8, while the Ryzen Z2 GPU has no listed bus interface, consistent with its integrated design.

Head-to-Head Benchmarks

There are no head-to-head benchmark entries in the database for these two products, so the comparison rests on the RTX 5060 Ti's recorded scores and the Ryzen Z2 GPU's absence of scores. The RTX 5060 Ti delivers 23.70 TFLOPS of FP32 performance versus 8.294 TFLOPS for the Ryzen Z2 GPU, a 2.86x advantage. FP16 performance follows the same 1:1 ratio for both cards, meaning the NVIDIA card also delivers 23.70 TFLOPS FP16 versus 8.294 TFLOPS for the AMD part.

The RTX 5060 Ti's PassMark scores show a wide spread across API generations. DirectX 9 scores 228, DirectX 10 scores 142, DirectX 11 scores 220, and DirectX 12 scores 82. The G2D score of 1169 reflects 2D rendering capability, while the G3D score of 21981 and GPU compute score of 11365 represent the card's main workload strengths. The 3DMark Steel Nomad DX12 score of 4019 is the only modern cross-vendor benchmark recorded.

The RTX 5060 Ti's average benchmark score of 4901 and its nearest rival deltas indicate that its overall standing is close to much older hardware. The AMD FirePro W5130M averages 4904, just 0.1% above the RTX 5060 Ti. The NVIDIA GeForce GTS 450 averages 4893, 0.2% below. The AMD Radeon R7 M265 and R7 M360 average 4929 and 4931 respectively, both 0.6% above. These results suggest that the RTX 5060 Ti's average score, while far ahead of the Ryzen Z2 GPU's unmeasured baseline, does not place it in a dominant position relative to legacy parts in the database's aggregate metric.

FAQ

Q: Which GPU has more memory capacity?

A: The AMD Ryzen Z2 GPU has 16 GB of LPDDR5X, while the NVIDIA RTX 5060 Ti has 8 GB of GDDR7. The AMD part has double the capacity.

Q: Which GPU has higher memory bandwidth?

A: The NVIDIA RTX 5060 Ti has 448.0 GB/s bandwidth, compared to 119.9 GB/s for the AMD Ryzen Z2 GPU. The NVIDIA card offers roughly 3.74x the bandwidth.

Q: What is the power requirement difference?

A: The AMD Ryzen Z2 GPU has a 28 W TDP and requires no power connectors. The NVIDIA RTX 5060 Ti has a 180 W TDP, requires a 1x 8-pin power connector, and needs a 450 W suggested PSU.

Q: Does the RTX 5060 Ti have tensor cores?

A: Yes, the NVIDIA RTX 5060 Ti has 144 tensor cores. The AMD Ryzen Z2 GPU has no tensor cores listed.

Q: What process nodes are used?

A: The AMD Ryzen Z2 GPU uses a 4 nm process at TSMC, while the NVIDIA RTX 5060 Ti uses a 5 nm process at TSMC.

Q: What are the recorded benchmark scores for the RTX 5060 Ti?

A: The RTX 5060 Ti scores 4019 in 3DMark Steel Nomad DX12, 142 in PassMark DirectX 10, 220 in DirectX 11, 82 in DirectX 12, 228 in DirectX 9, 1169 in G2D, 21981 in G3D, and 11365 in GPU compute. Its average benchmark score is 4901.

Specification Differences

The two GPUs differ across nearly every specification field. The AMD Ryzen Z2 GPU uses the Hawk Point chip with RDNA 3.0 architecture, while the NVIDIA RTX 5060 Ti uses the GB206 chip with Blackwell 2.0 architecture. Process nodes differ: 4 nm for AMD versus 5 nm for NVIDIA. Transistor counts are 25,390 million for AMD versus 21,900 million for NVIDIA, with die sizes of 178 mm² and 181 mm² respectively.

Clock speeds: the AMD part runs at 800 MHz base and 2700 MHz boost, with memory at 937 MHz (7.5 Gbps effective). The NVIDIA part runs at 2407 MHz base and 2572 MHz boost, with memory at 1750 MHz (28 Gbps effective). Memory size differs (16 GB LPDDR5X vs 8 GB GDDR7), while bus width is identical at 128 bits.

Compute resources: the AMD part has 768 shading units, 48 TMUs, 32 ROPs, and 12 RT cores. The NVIDIA part has 4608 shading units, 144 TMUs, 48 ROPs, 36 RT cores, and 144 tensor cores. Pixel rate is 86.40 GPixel/s versus 123.5 GPixel/s, texture rate is 129.6 GTexel/s versus 370.4 GTexel/s, and FP32/FP16 throughput is 8.294 TFLOPS versus 23.70 TFLOPS.

Power and physical specs: the AMD part has a 28 W TDP, no power connectors, and a single USB Type-C display output. The NVIDIA part has a 180 W TDP, a dual-slot design, a 1x 8-pin power connector, a 450 W suggested PSU, PCIe 5.0 x8 interface, and outputs of 1x HDMI 2.1b and 3x DisplayPort 2.1b. The NVIDIA card measures 241 mm in length, 111 mm in height, and 40 mm in width. The AMD part has no listed dimensions, slot width, or bus interface. The RTX 5060 Ti has a launch MSRP of 379 USD.