AMD Radeon Vega 3 vs NVIDIA GeForce RTX 4070 GDDR6 Comparison

AMD
RADEON

AMD Radeon Vega 3

CORE STATE Picasso
VRAM System Shared
CLOCK SPEED 1100 MHz
TDP 15 W
BUS WIDTH System Shared
ARCHITECTURE GCN 5.0
nm
PROCESS 12 nm
LAUNCH DATE 2019
VS
NVIDIA
GEFORCE

GeForce RTX 4070 GDDR6

CORE STATE AD104
VRAM 12 GB
CLOCK SPEED 2475 MHz
TDP 200 W
BUS WIDTH 192 bit
ARCHITECTURE Ada Lovelace
nm
PROCESS 5 nm
LAUNCH DATE 2024

PERFORMANCE BENCHMARKS

geekbench_metal
4,880
N/A
geekbench_opencl
3,963
N/A
geekbench_vulkan
3,961
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
4,334.5

Analysis: AMD Radeon Vega 3 vs NVIDIA GeForce RTX 4070 GDDR6

The Verdict

The data presents a stark contrast between two very different products. The NVIDIA GeForce RTX 4070 GDDR6 is a discrete, high-performance desktop graphics card built on a modern 5 nm process with a massive 35,800 million transistors. The AMD Radeon Vega 3 is an integrated graphics processor (IGP) from 2019, built on an older 12 nm process with just 4,940 million transistors. Benchmark results place both at the 25th percentile versus all GPUs, but this is misleading. The RTX 4070’s average benchmark score is 4335, while the Vega 3’s average is 4268. The difference is a mere 1.5% in favor of the RTX 4070, according to the nearestRivals data. However, this comparison is based on different benchmark suites. The Vega 3’s scores come from Geekbench (Metal, OpenCL, Vulkan), while the RTX 4070’s score is from a single 3DMark Steel Nomad DX12 test. This is not an apples-to-apples comparison.

For a user strictly looking at the data, the choice is clear for anyone needing a discrete graphics card for modern gaming or content creation: the RTX 4070 is the only viable option. It has dedicated ray tracing cores, tensor cores, and a dedicated 12 GB GDDR6 memory pool. The Vega 3, with its system-shared memory and 15 W TDP, is designed for basic computing, not demanding 3D workloads. The data shows the RTX 4070 is an end-of-life product with a launch MSRP of 599 USD, while the Vega 3 is also end-of-life. If you are building a system that requires a dedicated GPU, the RTX 4070 is the pick. If you are looking at a low-power, integrated solution for basic tasks, the Vega 3 is the pick, but it cannot be used for the same workloads. The benchmark scores, while close in number, do not reflect comparable performance due to the different test conditions.

Architecture Differences

The architectural divide between these two GPUs is immense. The NVIDIA GeForce RTX 4070 GDDR6 is built on the Ada Lovelace architecture using a 5 nm process at TSMC. Its chip, codenamed AD104, contains 35,800 million transistors on a 294 mm² die, giving it a transistor density of 121.8M / mm². In contrast, the AMD Radeon Vega 3 uses the older GCN 5.0 architecture on a 12 nm process at GlobalFoundries. Its chip, codenamed Picasso, has only 4,940 million transistors on a 210 mm² die, resulting in a much lower density of 23.5M / mm². This fundamental difference in process technology and transistor budget explains the massive performance gulf in raw compute resources.

The RTX 4070 features 5888 shading units, 184 texture mapping units (TMUs), and 64 render output units (ROPs). It also includes 46 dedicated ray tracing cores and 184 tensor cores. The Vega 3, by contrast, has only 192 shading units, 12 TMUs, and 4 ROPs. It has no dedicated ray tracing or tensor cores. The memory subsystems are equally different. The RTX 4070 has a 192-bit bus with 12 GB of GDDR6 memory providing 480.0 GB/s of bandwidth. The Vega 3 uses system-shared memory, meaning its bandwidth is system-dependent and its bus width is not fixed. The RTX 4070’s memory clock is 2500 MHz (20 Gbps effective), while the Vega 3 relies on the system’s main memory. This architectural gap is reflected in the API support: the RTX 4070 supports DirectX 12 Ultimate (12_2), while the Vega 3 only supports DirectX 12 (12_1). The RTX 4070 also supports Vulkan 1.4, while the Vega 3 supports Vulkan 1.3.

FAQ

Q: Which GPU has a higher average benchmark score?

A: The NVIDIA GeForce RTX 4070 GDDR6 has an average benchmark score of 4335, which is 1.5% higher than the AMD Radeon Vega 3’s average score of 4268.

Q: Do the two GPUs use the same manufacturing process?

A: No. The RTX 4070 uses a 5 nm process at TSMC, while the Vega 3 uses a 12 nm process at GlobalFoundries.

Q: Does the AMD Radeon Vega 3 have dedicated ray tracing hardware?

A: No. The Vega 3 has no ray tracing cores, while the RTX 4070 has 46 dedicated ray tracing cores.

Q: What is the difference in shading units?

A: The RTX 4070 has 5888 shading units, whereas the Vega 3 has only 192. This is a massive difference in parallel processing capacity.

Q: How much memory does each GPU have?

A: The RTX 4070 has 12 GB of dedicated GDDR6 memory on a 192-bit bus. The Vega 3 uses system-shared memory, so its memory size and type are not fixed.

Q: What is the TDP of each GPU?

A: The RTX 4070 has a TDP of 200 W and requires a 550 W power supply. The Vega 3 has a TDP of 15 W and requires no power connectors or a suggested PSU.

Specification Differences

The specifications differ across nearly every measurable field. The process node is 5 nm for the RTX 4070 versus 12 nm for the Vega 3. Transistor count is 35,800 million for the RTX 4070 versus 4,940 million for the Vega 3. The die size is 294 mm² for the RTX 4070 versus 210 mm² for the Vega 3. Transistor density is 121.8M / mm² versus 23.5M / mm². Base clock speed is 1920 MHz for the RTX 4070 versus 300 MHz for the Vega 3. Boost clock is 2475 MHz versus 1100 MHz. The RTX 4070 has a fixed memory clock of 2500 MHz (20 Gbps effective), while the Vega 3’s memory clock is "System Shared."

Memory configuration is fundamentally different: 12 GB GDDR6 on a 192-bit bus with 480.0 GB/s bandwidth versus system-shared memory with system-dependent bandwidth. The RTX 4070 has 5888 shading units, 184 TMUs, and 64 ROPs. The Vega 3 has 192 shading units, 12 TMUs, and 4 ROPs. The RTX 4070 has 46 RT cores and 184 tensor cores; the Vega 3 has none. Pixel rate is 158.4 GPixel/s versus 4.400 GPixel/s. Texture rate is 455.4 GTexel/s versus 13.20 GTexel/s. FP32 performance is 29.15 TFLOPS versus 422.4 GFLOPS. FP16 performance is 29.15 TFLOPS (1:1) versus 844.8 GFLOPS (2:1). TDP is 200 W versus 15 W. The RTX 4070 is dual-slot with a 16-pin connector, while the Vega 3 is an IGP with no connectors. The RTX 4070 uses PCIe 4.0 x16, while the Vega 3 uses an IGP bus interface. Display outputs are 1x HDMI 2.1 and 3x DisplayPort 1.4a for the RTX 4070, versus motherboard-dependent for the Vega 3. DirectX support is 12 Ultimate (12_2) versus 12 (12_1). Vulkan support is 1.4 versus 1.3. Release dates are 2024-08-19 for the RTX 4070 versus 2019-11-19 for the Vega 3. The RTX 4070 has a launch MSRP of 599 USD; the Vega 3 has no launch MSRP listed.

Head-to-Head Benchmarks

There are no direct head-to-head benchmark entries in the data for these two GPUs. The comparison must be made through their respective average scores and nearest rival deltas. The RTX 4070’s average score is 4335, and its nearest rivals include the Intel Iris Pro Graphics 5200 (4360, -0.6% delta), the NVIDIA GeForce 930M (4388, -1.2% delta), the AMD FirePro W2100 (4295, +0.9% delta), and the NVIDIA GeForce GTX 460M (4282, +1.2% delta). This indicates the RTX 4070 sits in a performance band where it is slightly slower than some older mobile GPUs and slightly faster than others.

The Vega 3’s average score is 4268. Its nearest rivals include the NVIDIA GeForce GTX 460M (4282, -0.3% delta), the AMD FirePro W2100 (4295, -0.6% delta), the NVIDIA Quadro K3000M (4241, +0.6% delta), and the NVIDIA GeForce RTX 4070 GDDR6 (4335, -1.5% delta). This places the Vega 3 in a similar performance tier, but the context is crucial. The RTX 4070 achieves its score in a single DX12 test (3DMark Steel Nomad), while the Vega 3’s scores come from Geekbench compute tests (Metal, OpenCL, Vulkan). The RTX 4070 is 1.5% faster than the Vega 3 based on these averages, but this is not a like-for-like comparison. The RTX 4070’s FP32 throughput is 29.15 TFLOPS, which is 69 times higher than the Vega 3’s 422.4 GFLOPS. The RTX 4070’s texture rate is 455.4 GTexel/s, which is 34.5 times higher than the Vega 3’s 13.20 GTexel/s. These raw compute differences are enormous, even if the aggregate benchmark scores appear close.

Where Each One Wins

The NVIDIA GeForce RTX 4070 GDDR6 wins decisively in any workload that leverages its dedicated hardware. For ray-traced gaming, the 46 RT cores provide a capability the Vega 3 entirely lacks. For AI-accelerated tasks, the 184 tensor cores offer compute power that is not present in the Vega 3. The 12 GB of dedicated GDDR6 memory with 480.0 GB/s bandwidth is essential for high-resolution textures and large datasets, whereas the Vega 3’s system-shared memory is a bottleneck that depends entirely on the rest of the system. The RTX 4070’s pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s make it suitable for high-refresh-rate 1440p or 4K gaming, while the Vega 3’s 4.400 GPixel/s pixel rate is suited only for basic 2D desktop rendering or very light 3D loads. The RTX 4070 also supports DirectX 12 Ultimate and Vulkan 1.4, enabling the latest graphics features.

The AMD Radeon Vega 3 wins in the domain of power efficiency and system simplicity. Its 15 W TDP is 185 W lower than the RTX 4070’s 200 W TDP. It requires no power connectors and no suggested PSU, making it a drop-in solution for any motherboard with an integrated processor. It is an IGP, meaning it takes up no slot space and has no dimensions to consider. For a basic office PC, a home theater PC, or a lightweight laptop, the Vega 3 is the only sensible choice from this data. It supports OpenGL 4.6 and Vulkan 1.3, which covers older or less demanding titles. In terms of raw compute, the Vega 3’s FP16 performance is 844.8 GFLOPS (2:1), which is higher than its FP32 rate, but this is still negligible compared to the RTX 4070’s 29.15 TFLOPS FP32. The Vega 3 also has a higher transistor density per watt, but that is a minor point. The data shows the Vega 3 is for users who need graphics output without any additional power draw or physical card. The RTX 4070 is for users who need actual graphics performance. There is no scenario where the Vega 3 is a substitute for the RTX 4070 in a gaming or professional 3D workload, and there is no scenario where the RTX 4070 is a reasonable choice for a low-power integrated system.

DETAILED SPECIFICATIONS

SPECIFICATION
Vega 3
RTX 4070 GDDR6
Core Specs
Shading Units
192
5,888 +2966.7%
Shaders
192
5,888 +2966.7%
TMUs
12
184 +1433.3%
ROPs
4
64 +1500.0%
Compute Units
3
—
SM Count
—
46
Clocks
Base Clock
300 MHz
1920 MHz
Boost Clock
1100 MHz
2475 MHz
Memory Clock
System Shared
2500 MHz 20 Gbps effective
Memory
Memory Size
System Shared
12 GB
VRAM (MB)
—
12,288
Memory Type
System Shared
GDDR6
Memory Bus
System Shared
192 bit
Bandwidth
System Dependent
480.0 GB/s
Cache
L1 Cache
—
128 KB (per SM)
L2 Cache
—
36 MB
Performance
Pixel Rate
4.400 GPixel/s
158.4 GPixel/s
Texture Rate
13.20 GTexel/s
455.4 GTexel/s
FP32 (TFLOPS)
422.4 GFLOPS
29.15 TFLOPS
FP64 (TFLOPS)
26.40 GFLOPS (1:16)
455.4 GFLOPS (1:64)
FP16 (TFLOPS)
844.8 GFLOPS (2:1)
29.15 TFLOPS (1:1)
AI/RT
RT Cores
—
46
Tensor Cores
—
184
Power
TDP
15 W
200 W
TDP (W)
15
200 +1233.3%
Suggested PSU
—
550 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
GCN 5.0
Ada Lovelace
GPU Name
Picasso
AD104
Generation
Vega IGP (Picasso)
GeForce 40
Process Size
12 nm
5 nm
Transistors
4,940 million
35,800 million
Die Size
210 mm²
294 mm²
Foundry
GlobalFoundries
TSMC
Density
23.5M / mm²
121.8M / mm²
API Support
DirectX
12 (12_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.1
3.0
CUDA
—
8.9
Shader Model
6.7
6.9
Physical
Slot Width
IGP
Dual-slot
Length
—
240 mm 9.4 inches
Height
—
110 mm 4.3 inches
Outputs
Motherboard Dependent
1x HDMI 2.13x DisplayPort 1.4a
Bus Interface
IGP
PCIe 4.0 x16
Other
Launch Price
—
599 USD
Production
End-of-life
End-of-life
Predecessor
GCN 3.0 IGP
GeForce 30
Successor
Vega II IGP
GeForce 50
View Radeon Vega 3 Details View GeForce RTX 4070 GDDR6 Details