AMD Radeon Vega 10 Mobile vs NVIDIA GeForce GT 555M Comparison
AMD Radeon Vega 10 Mobile
GeForce GT 555M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Vega 10 Mobile vs NVIDIA GeForce GT 555M
The NVIDIA GeForce GT 555M and AMD Radeon Vega 10 Mobile land within 0.3% of each other in the only shared benchmark, making this a near-statistical tie in raw compute. The GT 555M edges ahead with a Geekbench OpenCL score of 6493 versus the Vega 10 Mobile’s 6476, but both sit at the 37th percentile among all GPUs, indicating they occupy the same performance tier. This is a clash of two very different designs: a 2011 discrete Fermi part versus a 2019 integrated GCN 5.0 solution, with the data showing they deliver essentially identical results despite their architectural chasm.
Head-to-Head Benchmarks
The single head-to-head data point is Geekbench OpenCL, where the NVIDIA GeForce GT 555M scores 6493 and the AMD Radeon Vega 10 Mobile scores 6476. That 17-point gap translates to a 0.3% delta in the GT 555M’s favor. For context, the GT 555M’s nearest rival in the broader database is the NVIDIA Quadro M5000M at 6481 (a 0.2% difference), while the GTX 670M sits just above at 6513 (0.3% higher). The Vega 10 Mobile’s closest comparison is the same Quadro M5000M at 6481 (0.1% above it), with the GTX 670M again slightly ahead at 6513 (0.6% higher). Both GPUs are effectively bracketed by the same set of competitors, with the Intel UHD Graphics P750 at 6554 representing a 0.9% lead over the GT 555M and the RTX PRO 5000 72 GB Blackwell trailing the Vega 10 Mobile by 1.1% at 6407.
What matters here is not the 0.3% delta itself but the pattern: neither part can separate itself from the other or from a cluster of mid-range and integrated solutions. The GT 555M wins the one benchmark, but the margin is within noise. If you needed a decisive victory, the data does not provide one. Instead, it shows two GPUs whose average benchmark scores differ by less than one percent, with the GT 555M holding a 1-0 win count in head-to-head tests. The practical takeaway is that in OpenCL compute workloads, users should expect interchangeable performance between these two, with any difference falling well below perceptible thresholds.
FAQ
Q: Which GPU has the higher Geekbench OpenCL score?
A: The NVIDIA GeForce GT 555M scores 6493, while the AMD Radeon Vega 10 Mobile scores 6476, giving the GT 555M a 0.3% advantage.
Q: How do these GPUs compare to the NVIDIA Quadro M5000M?
A: The Quadro M5000M scores 6481, which is 0.2% lower than the GT 555M and 0.1% higher than the Vega 10 Mobile. All three fall within a 0.3% band.
Q: What is the transistor count difference between the two?
A: The AMD Radeon Vega 10 Mobile contains 4,940 million transistors on a 210 mm² die, while the NVIDIA GeForce GT 555M has 1,170 million transistors on a 238 mm² die.
Q: Do both GPUs support DirectX 12?
A: Yes, but at different feature levels. The GT 555M supports DirectX 12 (11_0), while the Vega 10 Mobile supports DirectX 12 (12_1).
Q: What is the TDP of each GPU?
A: The GT 555M has a TDP of 35 W, while the Vega 10 Mobile is rated at 10 W.
Q: Which GPU has more shading units?
A: The AMD Radeon Vega 10 Mobile has 640 shading units, compared to 144 on the NVIDIA GeForce GT 555M.
Architecture Differences
The architectural gap is enormous. The GT 555M uses NVIDIA’s Fermi architecture on a GF106 chip, built on a 40 nm process at TSMC. It packs 1,170 million transistors into a 238 mm² die, yielding a transistor density of 4.9M per mm². The Vega 10 Mobile, by contrast, is a GCN 5.0 part using the Raven-M chip, fabricated by GlobalFoundries on a 14 nm node. It holds 4,940 million transistors on a 210 mm² die, achieving 23.5M transistors per mm² — a density roughly 4.8 times higher. That density advantage comes from both the smaller process node and the integrated design, which merges CPU and GPU components onto a single die.
The memory subsystems diverge completely. The GT 555M uses dedicated 1024 MB of DDR3 on a 128-bit bus, delivering 28.80 GB/s of bandwidth with memory clocked at 900 MHz (1800 Mbps effective). The Vega 10 Mobile has no dedicated VRAM; its memory size, type, bus width, and bandwidth are all listed as “System Shared” or “System Dependent,” meaning it borrows from system memory and its performance scales with the host platform. The GT 555M’s fixed 28.80 GB/s is a hard ceiling, whereas the Vega 10 Mobile’s bandwidth is variable and could be higher or lower depending on the laptop’s memory configuration.
Compute resources tell a similar story. The Vega 10 Mobile has 640 shading units, 40 TMUs, and 8 ROPs, while the GT 555M has 144 shading units, 24 TMUs, and 16 ROPs. The Vega part’s shading unit count is more than 4 times higher, yet its pixel rate (10.41 GPixel/s) is only about 3 times the GT 555M’s 3.540 GPixel/s, and its texture rate (52.04 GTexel/s) is roughly 3.7 times the GT 555M’s 14.16 GTexel/s. The Vega 10 Mobile also delivers 1.665 TFLOPS of FP32 performance versus 339.8 GFLOPS for the GT 555M — a nearly 5-fold lead — and it offers FP16 at 3.331 TFLOPS (2:1), which the GT 555M lacks entirely. Clock behavior differs too: the Vega 10 Mobile has a base clock of 300 MHz and a boost of 1301 MHz, while the GT 555M lists no base or boost clock, only its memory clock.
The feature sets diverge as well. The Vega 10 Mobile supports Vulkan 1.3 and DirectX 12 (12_1), while the GT 555M lists no Vulkan support and only DirectX 12 (11_0). Both support OpenGL 4.6. The Vega 10 Mobile is an IGP (integrated graphics processor) with no power connectors and a slot width of “IGP,” while the GT 555M is a discrete part using a PCIe 2.0 x16 bus interface. The GT 555M belongs to the GeForce 500M generation, succeeding the GeForce 400M and preceding the GeForce 600M. The Vega 10 Mobile is part of the Vega IGP generation (Raven Ridge-M), succeeding GCN 3.0 IGP and preceding Navi II IGP. Release dates are also far apart: the GT 555M launched on 2011-07-01, while the Vega 10 Mobile arrived on 2019-01-07.
The Verdict
The data points to a clear conclusion: pick based on platform and power constraints, not raw performance, because the benchmark scores are virtually identical. The GT 555M wins the only head-to-head test by 0.3%, but that margin is negligible in real-world use. The Vega 10 Mobile’s decisive advantages lie elsewhere: it consumes 10 W versus 35 W, offers more than 4 times the shading units, delivers 1.665 TFLOPS of FP32 versus 339.8 GFLOPS, and supports modern APIs like Vulkan 1.3 and DirectX 12 (12_1). The GT 555M counters with dedicated 1024 MB of VRAM and a fixed 28.80 GB/s bandwidth, which could provide more consistent memory performance than the Vega 10 Mobile’s system-shared, platform-dependent bandwidth.
For users selecting a system today, the Vega 10 Mobile is the more sensible choice if power efficiency and modern feature support matter. Its 10 W TDP makes it suitable for thin-and-light laptops, and its GCN 5.0 architecture is far more recent. The GT 555M, being end-of-life since 2011, offers no API advantages and consumes over 3 times the power for the same compute score. However, if you already own a laptop with a GT 555M and it meets your needs, the benchmark parity means there is no performance-based reason to upgrade solely for compute workloads. The Verdict: the Vega 10 Mobile wins on efficiency, architecture modernity, and feature support; the GT 555M wins on having dedicated VRAM and a marginal benchmark lead.
Specification Differences
The two GPUs differ in nearly every hardware specification. The GT 555M uses a 40 nm process and a 238 mm² die with 1,170 million transistors, while the Vega 10 Mobile uses a 14 nm process and a 210 mm² die with 4,940 million transistors. Transistor density is 4.9M per mm² for the GT 555M versus 23.5M per mm² for the Vega 10 Mobile. The GT 555M has 144 shading units, 24 TMUs, and 16 ROPs; the Vega 10 Mobile has 640 shading units, 40 TMUs, and 8 ROPs. Pixel rate is 3.540 GPixel/s versus 10.41 GPixel/s, and texture rate is 14.16 GTexel/s versus 52.04 GTexel/s. FP32 performance is 339.8 GFLOPS versus 1.665 TFLOPS, with only the Vega 10 Mobile offering FP16 at 3.331 TFLOPS (2:1). The GT 555M has 1024 MB of DDR3 on a 128-bit bus with 28.80 GB/s bandwidth; the Vega 10 Mobile has system-shared memory with dependent bandwidth. TDP is 35 W versus 10 W. The GT 555M uses PCIe 2.0 x16, while the Vega 10 Mobile is an IGP. DirectX support is 12 (11_0) versus 12 (12_1), and only the Vega 10 Mobile lists Vulkan 1.3. Both have OpenGL 4.6 and portable-device-dependent display outputs.
Where Each One Wins
The GT 555M wins in scenarios where dedicated VRAM matters. Its 1024 MB of DDR3 on a 128-bit bus provides a fixed 28.80 GB/s of bandwidth that does not depend on the host system’s memory configuration. For applications that are sensitive to memory latency or that cannot tolerate system-shared memory contention, the GT 555M’s dedicated pool is an advantage. It also holds the benchmark lead, however slim, in Geekbench OpenCL. The Vega 10 Mobile wins in every compute-throughput metric: 640 shading units, 40 TMUs, 1.665 TFLOPS FP32, 10.41 GPixel/s pixel rate, and 52.04 GTexel/s texture rate. Its 1301 MHz boost clock and 14 nm process allow it to deliver these numbers at 10 W, making it the winner for battery-powered or thermally constrained designs. It also wins on API support with Vulkan 1.3 and DirectX 12 (12_1), which the GT 555M cannot match. For modern games or compute workloads that leverage these APIs, the Vega 10 Mobile is the only option. The GT 555M’s wins are limited to the single benchmark and the consistency of dedicated memory; the Vega 10 Mobile wins on architecture, efficiency, and feature set.