AMD Radeon RX 9060 XT 8 GB vs NVIDIA Quadro 3000M Comparison
AMD Radeon RX 9060 XT 8 GB
Quadro 3000M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT 8 GB vs NVIDIA Quadro 3000M
Head-to-Head Benchmarks
The benchmark data for these two GPUs does not include any shared test results. The AMD Radeon RX 9060 XT 8 GB has a single recorded score in 3DMark Steel Nomad (DX12) of 4093, while the NVIDIA Quadro 3000M has a single Geekbench OpenCL score of 3718. Because these are different workloads, no direct head-to-head comparison can be drawn from a common test. However, their overall average scores and percentile rankings provide a baseline for relative positioning.
The AMD card sits at the 24th percentile across all GPUs, with an average benchmark score of 4093. Its nearest rivals in the database are the NVIDIA Quadro K2100M (avg score 4151, delta +1.4%), the AMD Radeon R5 M330 (avg score 4170, delta +1.8%), the Intel HD Graphics 630 (avg score 4075, delta -0.4%), and the NVIDIA GeForce GT 755M (avg score 4033, delta -1.5%). This places the RX 9060 XT in a narrow band where it trades leads by less than 2% in either direction against these older or lower-tier parts.
The NVIDIA Quadro 3000M, by contrast, sits at the 22nd percentile, with an average score of 3718. Its nearest rivals include the NVIDIA GeForce GT 740M (avg score 3717, delta 0%), the NVIDIA GeForce GT 635M (avg score 3740, delta -0.6%), the NVIDIA GeForce 825M (avg score 3694, delta +0.6%), and the AMD Radeon HD 6770 (avg score 3649, delta +1.9%). The Quadro 3000M’s delta range is similarly tight, within roughly 2% of its closest competitors, but its absolute score is about 9% lower than the RX 9060 XT’s average.
In practical terms, the RX 9060 XT’s 4093 average score is 375 points higher than the Quadro 3000M’s 3718. That is a 10.1% gap in raw average performance. Yet both cards occupy the bottom quartile of the database, meaning neither is a high-flying performer in absolute terms. The RX 9060 XT leads, but the Quadro 3000M is not dramatically far behind in this metric, despite being from a much older generation.
Architecture Differences
The architectural gap between these two GPUs is vast. The AMD Radeon RX 9060 XT 8 GB is built on the Navi 44 chip, using RDNA 4.0 architecture under the codename Strix Point, part of the Navi IV (RX 9000) generation. It is fabricated on a 4 nm process at TSMC, with 29,700 million transistors packed into a 199 mm² die. That yields a transistor density of 149.2 million per square millimeter.
The NVIDIA Quadro 3000M uses the GF104 chip, based on the Fermi architecture, from the Quadro Fermi-M (x000M) generation. It is built on a 40 nm process, also at TSMC, but with only 1,950 million transistors on a much larger 332 mm² die. Its transistor density is just 5.9 million per square millimeter. This means the RX 9060 XT packs roughly 25 times more transistors per area, and over 15 times more transistors in total, despite having a smaller physical die.
The memory subsystems are equally divergent. The RX 9060 XT has 8 GB of GDDR6 memory on a 128-bit bus, with memory clocked at 2518 MHz (20.1 Gbps effective) and bandwidth of 322.3 GB/s. The Quadro 3000M has 2 GB of GDDR5 memory on a 256-bit bus, with memory clocked at 625 MHz (2.5 Gbps effective) and bandwidth of 80.00 GB/s. The RX 9060 XT delivers over four times the memory bandwidth, though the Quadro’s wider bus partially compensates for its slower clock speed.
Compute resources also differ sharply. The RX 9060 XT has 2048 shading units, 128 texture mapping units, 64 ROPs, and 32 ray tracing cores, with no tensor cores listed. The Quadro 3000M has 240 shading units, 40 TMUs, and 32 ROPs, with no RT or tensor cores. The AMD card’s pixel rate is 200.3 GPixel/s versus 4.5 GPixel/s for the NVIDIA card, and its texture rate is 400.6 GTexel/s versus 18.0 GTexel/s. FP32 throughput is 25.64 TFLOPS for the RX 9060 XT, compared to 432.0 GFLOPS for the Quadro 3000M — a 59x difference.
The RX 9060 XT also supports FP16 at a 1:1 ratio (25.64 TFLOPS), while the Quadro 3000M has no listed FP16 capability. API support differs as well: the RX 9060 XT supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4; the Quadro 3000M supports DirectX 12 (11_0) and OpenGL 4.6, but has no Vulkan support listed.
Power and physical design are also distinct. The RX 9060 XT has a TDP of 150 W, is dual-slot, uses a single 8-pin power connector, and requires a 450 W suggested PSU. It connects via PCIe 5.0 x16 and outputs 1x HDMI 2.1b and 2x DisplayPort 2.1a. The Quadro 3000M has a TDP of 75 W, is an MXM module, has no power connectors, and uses an MXM-B (3.0) interface with display outputs described as "Portable Device Dependent."
FAQ
Q: Which GPU has a higher average benchmark score?
A: The AMD Radeon RX 9060 XT 8 GB has an average benchmark score of 4093, while the NVIDIA Quadro 3000M has an average score of 3718. The RX 9060 XT leads by 375 points.
Q: What are the closest rivals for each GPU?
A: For the RX 9060 XT, the closest rival is the Intel HD Graphics 630 (delta +0.4%). For the Quadro 3000M, the closest rival is the NVIDIA GeForce GT 740M (delta 0%).
Q: How much memory does each GPU have?
A: The RX 9060 XT has 8 GB of GDDR6 memory on a 128-bit bus. The Quadro 3000M has 2 GB of GDDR5 memory on a 256-bit bus.
Q: What is the process node difference?
A: The RX 9060 XT is built on a 4 nm process at TSMC, while the Quadro 3000M is built on a 40 nm process at the same foundry.
Q: Does the Quadro 3000M support ray tracing?
A: No. The Quadro 3000M has no ray tracing cores listed, while the RX 9060 XT has 32 RT cores.
Q: What is the TDP of each card?
A: The RX 9060 XT has a TDP of 150 W, while the Quadro 3000M has a TDP of 75 W.
The Verdict
The data points overwhelmingly toward the AMD Radeon RX 9060 XT 8 GB as the more capable GPU by nearly every measurable specification. Its average benchmark score is 10.1% higher than the Quadro 3000M’s. Its FP32 throughput is 25.64 TFLOPS versus 432.0 GFLOPS, a 59x advantage. Memory bandwidth is 322.3 GB/s versus 80.00 GB/s, a 4x advantage. The RX 9060 XT also has 4x the VRAM (8 GB vs 2 GB), 8.5x the shading units (2048 vs 240), and 3x the TMUs (128 vs 40). It supports modern APIs like DirectX 12 Ultimate and Vulkan 1.4, whereas the Quadro 3000M lacks Vulkan and only reaches DirectX 12 (11_0).
The Quadro 3000M does hold a few advantages, though. Its TDP is exactly half of the RX 9060 XT’s (75 W vs 150 W), and it requires no power connectors, making it far more energy-efficient per watt in absolute terms. It also has a wider memory bus (256-bit vs 128-bit), though this does not compensate for its far lower bandwidth. Its MXM form factor is suited for portable devices, whereas the RX 9060 XT is a dual-slot desktop card.
The production statuses also differ: the RX 9060 XT is listed as Active, released on 2025-06-03, while the Quadro 3000M is End-of-life, released on 2011-02-21. The RX 9060 XT has a launch MSRP of 299 USD. The Quadro 3000M has no launch MSRP listed.
For anyone choosing between these two, the RX 9060 XT is the clear pick for performance, modern features, and longevity. The Quadro 3000M is only preferable in scenarios where power draw and portability are paramount, given its 75 W TDP and MXM form factor.
Specification Differences
| Field | AMD Radeon RX 9060 XT 8 GB | NVIDIA Quadro 3000M |
|-------|---------------------------|---------------------|
| Process Node | 4 nm | 40 nm |
| Transistors | 29,700 million | 1,950 million |
| Die Size | 199 mm² | 332 mm² |
| Memory Size | 8 GB | 2 GB |
| Memory Type | GDDR6 | GDDR5 |
| Memory Bus | 128 bit | 256 bit |
| Memory Bandwidth | 322.3 GB/s | 80.00 GB/s |
| Shading Units | 2048 | 240 |
| TMUs | 128 | 40 |
| ROPs | 64 | 32 |
| RT Cores | 32 | None |
| Pixel Rate | 200.3 GPixel/s | 4.500 GPixel/s |
| Texture Rate | 400.6 GTexel/s | 18.00 GTexel/s |
| FP32 | 25.64 TFLOPS | 432.0 GFLOPS |
| FP16 | 25.64 TFLOPS (1:1) | None |
| TDP | 150 W | 75 W |
| Slot Width | Dual-slot | MXM Module |
| Power Connectors | 1x 8-pin | None |
| Suggested PSU | 450 W | None |
| Bus Interface | PCIe 5.0 x16 | MXM-B (3.0) |
| Display Outputs | 1x HDMI 2.1b, 2x DisplayPort 2.1a | Portable Device Dependent |
| DirectX | 12 Ultimate (12_2) | 12 (11_0) |
| Vulkan | 1.4 | None |
| Production Status | Active | End-of-life |
| Release Date | 2025-06-03 | 2011-02-21 |
Where Each One Wins
The AMD Radeon RX 9060 XT 8 GB wins in every performance category measured. It has a higher average benchmark score (4093 vs 3718), higher pixel and texture rates (200.3 GPixel/s vs 4.5 GPixel/s; 400.6 GTexel/s vs 18.0 GTexel/s), and vastly higher FP32 compute (25.64 TFLOPS vs 432.0 GFLOPS). It also wins on memory bandwidth (322.3 GB/s vs 80.00 GB/s), VRAM capacity (8 GB vs 2 GB), and API support, including DirectX 12 Ultimate and Vulkan 1.4. For any gaming, rendering, or compute workload requiring modern features like ray tracing, the RX 9060 XT is the only viable choice.
The NVIDIA Quadro 3000M wins on power efficiency. Its 75 W TDP is half of the RX 9060 XT’s 150 W, and it requires no external power connectors, making it suitable for systems with strict power budgets. Its MXM form factor is designed for portable devices, whereas the RX 9060 XT is a dual-slot desktop card. The Quadro 3000M also has a wider 256-bit memory bus, though this does not translate into higher bandwidth.
In summary, the RX 9060 XT is the superior GPU for almost any task, while the Quadro 3000M retains niche value for low-power, portable, or legacy applications. The data offers no scenario where the Quadro 3000M outperforms the RX 9060 XT in raw performance, but its power draw and form factor could be deciding factors in specialized deployments.