AMD Radeon RX 9060 XT 16 GB vs NVIDIA Quadro P400 Comparison
AMD Radeon RX 9060 XT 16 GB
Quadro P400
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 9060 XT 16 GB vs NVIDIA Quadro P400
Head-to-Head Benchmarks
The aggregate benchmark data places these two cards in an extraordinarily tight race. The NVIDIA Quadro P400 averages 4,684 points across its benchmark suite, while the AMD Radeon RX 9060 XT 16 GB averages 4,657 points. That 27-point gap translates to a mere 0.6% difference, with the Quadro P400 holding a razor-thin edge. The two cards occupy the same 27th percentile among all GPUs, meaning both sit squarely in the lower-middle tier of the performance distribution. In the nearest-rival comparison, the RX 9060 XT sits exactly level with the AMD Radeon R5 M320 at a 0% delta, while the Quadro P400 edges out that same R5 M320 by 0.6%.
The Quadro P400's strongest showing comes in the Geekbench Vulkan test, where it scores 5,119 points. That result is its higher of the two recorded benchmarks; its Geekbench OpenCL score trails at 4,249 points. The RX 9060 XT's benchmark portfolio is far more extensive, featuring eight recorded tests across 3DMark and Passmark suites. Its most striking result is the Passmark G3D score of 20,099, which dwarfs the Quadro P400's entire output. Yet the aggregate average tells a different story: the RX 9060 XT's Passmark DirectX 12 score of just 57 points and its Passmark DirectX 11 score of 185 points drag its overall average down substantially. The card also records a 3DMark Steel Nomad DX12 score of 4,093, a Passmark GPU Compute score of 11,234, and Passmark DirectX 9 and DirectX 10 scores of 305 and 116, respectively.
The delta between the two cards' averages is smaller than the delta between either card and its nearest rival. The Quadro P400 sits 1.2% above the NVIDIA GeForce GTX 970M and 0.9% below the AMD Radeon R8 M445DX. The RX 9060 XT, meanwhile, sits 0.6% above the GTX 970M and 0.8% above the NVIDIA Quadro M3000M. What emerges is a cluster of six GPUs spanning less than 2% in aggregate score, with the P400 and RX 9060 XT effectively interchangeable by this metric.
The performance disparity in raw compute, however, is enormous and does not align with the aggregate scores. The RX 9060 XT delivers 25.64 TFLOPS of FP32 compute, while the Quadro P400 delivers 641.0 GFLOPS — a factor of roughly 40. The RX 9060 XT also produces 400.6 GTexel/s of texture fill rate versus 20.03 GTexel/s for the P400, and 200.3 GPixel/s of pixel rate versus 20.03 GPixel/s. These figures suggest the aggregate benchmarks are not capturing the same workload profile, likely because the P400's two recorded tests (OpenCL and Vulkan) exercise different code paths than the RX 9060 XT's Passmark suite.
The Verdict
The data paints a paradoxical picture. If the decision rests solely on the aggregate benchmark score, the NVIDIA Quadro P400 wins by 27 points, or 0.6%. That margin is statistically insignificant — well within run-to-run variance for any benchmark suite. Neither card distinguishes itself in the overall percentile ranking; both sit at the 27th percentile among all GPUs.
The RX 9060 XT, however, demonstrates capabilities that the P400 simply cannot match. Its Passmark G3D score of 20,099 is more than four times the P400's best recorded score in any test. Its Passmark GPU Compute score of 11,234 indicates substantial general-purpose compute throughput. The card also supports DirectX 12 Ultimate (12_2), while the P400 is limited to DirectX 12 (12_1). For any workload that leverages modern DirectX features or heavy compute, the RX 9060 XT is the clear choice despite its lower aggregate score.
The P400's aggregate advantage appears to be an artifact of benchmark selection rather than genuine performance superiority. Its two recorded tests — Geekbench OpenCL and Vulkan — are synthetic workloads that may not reflect real-world gaming or professional rendering tasks. The RX 9060 XT's Passmark suite includes multiple DirectX versions and a dedicated compute test, providing broader coverage of actual usage scenarios.
For professional workstation duties typical of the Quadro line, the P400's 3x mini-DisplayPort 1.4a outputs and single-slot design offer practical advantages. For anything requiring modern graphics features, high memory capacity, or substantial compute throughput, the RX 9060 XT wins decisively. The aggregate score is a tie; the feature set is not.
Where Each One Wins
The NVIDIA Quadro P400 wins in scenarios where the benchmark average is the sole criterion. Its 4,684 aggregate score edges the RX 9060 XT's 4,657, and its Geekbench Vulkan score of 5,119 is a strong synthetic result. The P400 also wins on physical footprint: it is a single-slot card at 150 mm in length and 69 mm in height, requiring no power connectors and a 200 W suggested PSU. The RX 9060 XT is a dual-slot card with a single 8-pin connector and a 450 W suggested PSU. For compact or low-power systems, the P400 is the practical pick.
The AMD Radeon RX 9060 XT wins on nearly every technical specification. It offers 16 GB of GDDR6 memory on a 128-bit bus with 322.3 GB/s of bandwidth, versus the P400's 2 GB of GDDR5 on a 64-bit bus with 32.06 GB/s. The RX 9060 XT has 2,048 shading units, 128 TMUs, 64 ROPs, and 32 ray-tracing cores; the P400 has 256 shading units, 16 TMUs, and 16 ROPs, with no ray-tracing hardware. The RX 9060 XT's boost clock of 3,130 MHz is more than double the P400's 1,252 MHz boost. Its 25.64 TFLOPS FP32 throughput and 25.64 TFLOPS FP16 throughput (at a 1:1 ratio) represent a generational leap over the P400's 641.0 GFLOPS FP32 and 10.02 GFLOPS FP16 (at a 1:64 ratio).
The RX 9060 XT also wins on memory interface and connectivity. It uses PCIe 5.0 x16 versus the P400's PCIe 3.0 x16, and offers HDMI 2.1b and dual DisplayPort 2.1a outputs versus the P400's three mini-DisplayPort 1.4a connections. The RX 9060 XT is built on a 4 nm TSMC process with 29,700 million transistors on a 199 mm² die, while the P400 uses Samsung's 14 nm process with 3,300 million transistors on a 132 mm² die.
FAQ
Q: Which card has the higher average benchmark score?
A: The NVIDIA Quadro P400 averages 4,684 points across its benchmarks, while the AMD Radeon RX 9060 XT 16 GB averages 4,657 points. The P400 leads by 0.6%.
Q: What is the memory capacity difference between these two cards?
A: The RX 9060 XT has 16 GB of GDDR6 memory on a 128-bit bus, while the Quadro P400 has 2 GB of GDDR5 memory on a 64-bit bus. The RX 9060 XT's bandwidth is 322.3 GB/s versus 32.06 GB/s for the P400.
Q: Do both cards support the same DirectX version?
A: No. The RX 9060 XT supports DirectX 12 Ultimate (12_2), while the Quadro P400 supports DirectX 12 (12_1). Both cards support OpenGL 4.6 and Vulkan 1.4.
Q: Which card has ray-tracing cores?
A: The RX 9060 XT has 32 ray-tracing cores. The Quadro P400 has no ray-tracing cores listed.
Q: What is the power consumption difference?
A: The Quadro P400 has a TDP of 30 W and requires no power connectors, with a suggested PSU of 200 W. The RX 9060 XT has a TDP of 160 W, uses a single 8-pin connector, and requires a suggested PSU of 450 W.
Q: What is the release date and production status of each card?
A: The Quadro P400 was released on 2017-02-06 and is end-of-life. The RX 9060 XT was released on 2025-06-03 and remains in active production.
Architecture Differences
The architectural gap between these two GPUs is generational. The Quadro P400 is built on NVIDIA's Pascal architecture, using the GP107 chip fabricated on Samsung's 14 nm process. It packs 3,300 million transistors into a 132 mm² die, yielding a transistor density of 25.0 million per square millimeter. The RX 9060 XT uses AMD's RDNA 4.0 architecture with the Navi 44 chip, built on TSMC's 4 nm process. It contains 29,700 million transistors on a 199 mm² die, for a density of 149.2 million per square millimeter — nearly six times higher.
The compute pipelines differ fundamentally. The P400's 256 shading units are organized around Pascal's scalar design, with 16 TMUs and 16 ROPs. The RX 9060 XT fields 2,048 shading units, 128 TMUs, and 64 ROPs, plus 32 dedicated ray-tracing cores. The FP16 throughput tells a stark story: the P400 delivers 10.02 GFLOPS at a 1:64 ratio, meaning FP16 is heavily rate-limited; the RX 9060 XT delivers 25.64 TFLOPS at a 1:1 ratio, offering full-rate half-precision compute. This makes the RX 9060 XT dramatically better suited for AI inference and workloads that leverage FP16.
Memory architecture is another major divergence. The P400 uses 2 GB of GDDR5 across a 64-bit bus, with 4 Gbps effective memory speed and 32.06 GB/s bandwidth. The RX 9060 XT uses 16 GB of GDDR6 across a 128-bit bus, with memory clocked at 2,518 MHz (20.1 Gbps effective) and 322.3 GB/s bandwidth. The RX 9060 XT's memory subsystem offers ten times the bandwidth and eight times the capacity.
Clock behavior also differs. The P400 runs at a 1,228 MHz base and 1,252 MHz boost — a narrow 24 MHz spread. The RX 9060 XT has a 1,700 MHz base, a 2,530 MHz game clock, and a 3,130 MHz boost, demonstrating far more aggressive boost behavior. The resulting pixel rate is 200.3 GPixel/s for the RX 9060 XT versus 20.03 GPixel/s for the P400; texture rate is 400.6 GTexel/s versus 20.03 GTexel/s.
The bus interface and display outputs reflect their respective eras. The P400 uses PCIe 3.0 x16 and outputs three mini-DisplayPort 1.4a connectors. The RX 9060 XT uses PCIe 5.0 x16 and provides one HDMI 2.1b port plus two DisplayPort 2.1a outputs. The RX 9060 XT's launch MSRP is 349 USD. The P400's launch MSRP is not listed in the available data. The P400's predecessor is Quadro Maxwell and its successor is Quadro Volta; the RX 9060 XT's predecessor is Navi III, with no successor yet listed. The RX 9060 XT belongs to the Radeon RX 9000 series and the Navi IV generation, while the P400 belongs to the Quadro Pascal (Px000) generation.