AMD Radeon RX 6500M vs NVIDIA RTX PRO 6000 Blackwell Max-Q Comparison
AMD Radeon RX 6500M
RTX PRO 6000 Blackwell Max-Q
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 6500M vs NVIDIA RTX PRO 6000 Blackwell Max-Q
The NVIDIA RTX PRO 6000 Blackwell Max-Q and AMD Radeon RX 6500M occupy opposite ends of the GPU spectrum, and the benchmark data reflects a chasm in raw performance. The most striking comparison comes from the 3DMark Steel Nomad DX12 test, where the NVIDIA card scores 11,088 points. This places it in the 50th percentile of all GPUs, with its nearest rival being the NVIDIA RTX PRO 6000D Blackwell Max-Q at an identical 11,088 points (0.0% delta). The AMD Radeon RX 6500M does not have a corresponding 3DMark Steel Nomad result, but its average benchmark score of 10,362 across multiple tests tells a different story. That average is based on a mix of Geekbench and Passmark scores, including a Geekbench OpenCL score of 38,586 and a Vulkan score of 43,837, which are compute-oriented metrics rather than gaming rasterization.
Looking at the NVIDIA card’s rivals, it is essentially tied with the AMD Radeon RX 550, which scores 11,075 (0.1% delta), and the NVIDIA GeForce GTX 1650 SUPER at 11,047 (0.4% delta). This suggests that in the specific Steel Nomad workload, the RTX PRO 6000 Blackwell Max-Q is not dramatically ahead of older, lower-tier cards — a curious result for a 300 W professional GPU. Conversely, the AMD RX 6500M’s nearest rivals include the NVIDIA Tesla C2075 at 10,400 (-0.4% delta) and the AMD Radeon RX 550X at 10,481 (-1.1% delta). The RX 6500M’s Passmark G3D score of 7,531 and DirectX 12 score of 34 highlight its modest gaming capability, while its DirectX 9 score of 92 and DirectX 10 score of 52 show better performance in legacy APIs. The NVIDIA card’s single benchmark result does not allow for a direct per-test comparison, but the percentile gap — 50th versus 48th — is narrow, suggesting that while the RTX PRO 6000 Blackwell Max-Q is faster on average, the RX 6500M is not catastrophically far behind in aggregate scoring.
FAQ
Q: How do the average benchmark scores compare between the two GPUs?
A: The NVIDIA RTX PRO 6000 Blackwell Max-Q has an average benchmark score of 11,088, while the AMD Radeon RX 6500M averages 10,362. This represents a roughly 7% advantage for the NVIDIA card in aggregate performance, though the two GPUs use entirely different benchmark suites — the NVIDIA card relies on a single 3DMark test, while the AMD card’s average is drawn from nine Geekbench and Passmark results.
Q: What is the percentile ranking for each GPU, and what does that imply?
A: The NVIDIA card sits in the 50th percentile of all GPUs, meaning it is exactly average in the database. The AMD RX 6500M is in the 48th percentile, slightly below average. Despite the massive difference in specifications, the percentile gap is only 2 points, indicating that the RX 6500M’s benchmark scores are competitive with many mid-range cards, even if its absolute performance is far lower.
Q: Which GPU has a higher memory bandwidth, and by how much?
A: The NVIDIA RTX PRO 6000 Blackwell Max-Q has a memory bandwidth of 1.79 TB/s, while the AMD RX 6500M offers 144.0 GB/s. This is a 12.4x difference in favor of the NVIDIA card, driven by its 512-bit bus and GDDR7 memory versus the AMD card’s 64-bit bus and GDDR6.
Q: Are there any benchmark results where the AMD card performs relatively well?
A: The RX 6500M’s Geekbench Vulkan score of 43,837 is its highest single result, and its Passmark G2D score of 385 is respectable for a mobile part. However, its Passmark DirectX 12 score of 34 is very low, suggesting that modern API workloads are a weak point, while older DirectX 9 and 10 scores (92 and 52) show better relative performance.
Q: What is the transistor density difference between the two chips?
A: The NVIDIA GB202 chip packs 92,200 million transistors on a 750 mm² die, yielding a density of 122.9M per mm². The AMD Navi 24 has 5,400 million transistors on a 107 mm² die, for a density of 50.5M per mm². The NVIDIA chip is over 2.4x denser, reflecting its more complex architecture.
Q: Which GPU has a higher boost clock?
A: The AMD RX 6500M has a boost clock of 2400 MHz, while the NVIDIA RTX PRO 6000 Blackwell Max-Q boosts to 2280 MHz. The AMD card also has a higher base clock at 2000 MHz versus 1035 MHz, meaning the mobile chip runs at higher frequencies despite having far fewer cores.
Architecture Differences
The architectural divide between these two GPUs is stark. The NVIDIA RTX PRO 6000 Blackwell Max-Q is built on the Blackwell 2.0 architecture using the GB202 chip, manufactured on a 5 nm process at TSMC. It integrates 92,200 million transistors on a 750 mm² die, giving it a transistor density of 122.9M per mm². In contrast, the AMD Radeon RX 6500M uses the RDNA 2.0 architecture with the Navi 24 chip, built on a 6 nm process, also at TSMC. The AMD chip contains just 5,400 million transistors on a 107 mm² die, with a density of 50.5M per mm². This means the NVIDIA chip has roughly 17x more transistors and 7x the die area.
The streaming processor counts reflect this disparity. The NVIDIA card features 24,064 shading units, 752 TMUs, and 192 ROPs, along with 188 RT cores and 752 tensor cores. The AMD card has 1,024 shading units, 64 TMUs, and 32 ROPs, with 16 RT cores and no tensor cores at all. The absence of tensor cores on the AMD side is significant, as it limits AI and machine learning acceleration. The NVIDIA card also supports FP16 at a 1:1 ratio with FP32 (both 109.7 TFLOPS), while the AMD card uses a 2:1 ratio, delivering 9.830 TFLOPS FP16 versus 4.915 TFLOPS FP32. Both GPUs support DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, so API compatibility is identical, but the underlying hardware capabilities are vastly different.
Specification Differences
The specification sheets reveal fundamental differences in every major category. The NVIDIA RTX PRO 6000 Blackwell Max-Q has a base clock of 1035 MHz and a boost clock of 2280 MHz, while the AMD RX 6500M runs at 2000 MHz base and 2400 MHz boost, with a game clock of 2191 MHz. Memory configurations are polar opposites: the NVIDIA card offers 96 GB of GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth, while the AMD card has 4 GB of GDDR6 on a 64-bit bus with 144.0 GB/s bandwidth. The NVIDIA card’s pixel rate is 437.8 GPixel/s and texture rate is 1,714.6 GTexel/s, compared to the AMD card’s 76.80 GPixel/s and 153.6 GTexel/s.
Power and physical specifications differ enormously. The NVIDIA card has a TDP of 300 W, requires a dual-slot cooler, uses a 1x 16-pin power connector, and needs a 700 W suggested PSU, with dimensions of 267 mm length, 111 mm height, and 40 mm width. The AMD card has a 50 W TDP, is classified as an IGP (integrated graphics processor) with no power connectors, and has no listed dimensions or suggested PSU since it is designed for portable devices. The NVIDIA card uses a PCIe 5.0 x16 interface and has 4x DisplayPort 2.1b outputs, while the AMD card uses PCIe 4.0 x4 and has portable-device-dependent outputs. Production status also differs: the NVIDIA card is Active and released on 2025-03-17, while the AMD card is End-of-life and was released on 2022-01-03. The NVIDIA card has a launch MSRP of 8,565 USD; the AMD card has no listed launch MSRP.
Where Each One Wins
The NVIDIA RTX PRO 6000 Blackwell Max-Q wins decisively in raw compute and memory-intensive workloads. Its 109.7 TFLOPS FP32 performance is 22.3x higher than the AMD card’s 4.915 TFLOPS, and its 1.79 TB/s bandwidth dwarfs the AMD card’s 144.0 GB/s. The 96 GB memory capacity is suited for large datasets, while the 512-bit bus enables massive parallel data movement. The 188 RT cores and 752 tensor cores give it a clear edge in ray tracing and AI workloads, areas where the AMD card has either minimal (16 RT cores) or no support (no tensor cores). The NVIDIA card’s 437.8 GPixel/s pixel rate and 1,714.6 GTexel/s texture rate are 5.7x and 11.2x higher, respectively, making it dominant in high-resolution rendering and texture-heavy scenes.
The AMD Radeon RX 6500M wins in power efficiency and portability. Its 50 W TDP is one-sixth of the NVIDIA card’s 300 W, and it requires no external power connectors, making it suitable for thin-and-light laptops. Its higher boost clock of 2400 MHz (versus 2280 MHz) shows that it can reach competitive frequencies despite its smaller size. In compute-oriented benchmarks, the AMD card’s Geekbench Vulkan score of 43,837 and OpenCL score of 38,586 demonstrate that it handles API-agnostic compute tasks reasonably well for its class. Its Passmark G2D score of 385 suggests solid 2D and desktop rendering performance. The AMD card also wins on legacy API support, with a Passmark DirectX 9 score of 92 and DirectX 10 score of 52, both of which are higher than its DirectX 12 score of 34, indicating that older games and applications run better relative to modern ones.
The Verdict
The data presents a clear but nuanced picture. The NVIDIA RTX PRO 6000 Blackwell Max-Q is the obvious choice for professionals requiring massive memory, extreme compute throughput, and advanced features like tensor cores for AI acceleration. Its 96 GB GDDR7 memory and 1.79 TB/s bandwidth are unmatched, and its 109.7 TFLOPS FP32 performance is in a different league from the AMD card. The 50th percentile ranking, while average, reflects the fact that this GPU is competing against all GPUs in the database, including gaming cards that may excel in specific tests. Its nearest rival being the RTX PRO 6000D Blackwell Max-Q at identical scores suggests that the Max-Q variant offers no performance advantage over its non-Max-Q counterpart in the tested workload.
The AMD Radeon RX 6500M is a different beast entirely. Its 48th percentile ranking is remarkably close to the NVIDIA card’s 50th percentile, despite having 1/24th the shading units and 1/24th the memory bandwidth. This suggests that the AMD card punches above its weight in aggregate benchmark scores, likely due to its efficient RDNA 2.0 architecture and high clock speeds. Its 50 W TDP and IGP form factor make it ideal for mobile devices where power and space are constrained. However, its 4 GB memory and 64-bit bus are severe limitations for modern games and professional workloads, and the lack of tensor cores rules out AI acceleration. For users who need a professional workstation GPU, the NVIDIA card is the only choice. For users who need a low-power mobile GPU for basic tasks and light gaming, the AMD card is adequate, but its end-of-life status and weak DirectX 12 performance suggest it is not a future-proof option. The verdict is that these GPUs serve entirely different markets, and the benchmark data confirms that neither is a substitute for the other.