AMD Radeon RX 590 GME vs NVIDIA RTX PRO 4000 Blackwell Comparison
AMD Radeon RX 590 GME
RTX PRO 4000 Blackwell
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 590 GME vs NVIDIA RTX PRO 4000 Blackwell
Head-to-Head Benchmarks
The benchmark data presents a decisive picture when comparing the AMD Radeon RX 590 GME and the NVIDIA RTX PRO 4000 Blackwell. Across the recorded head-to-head tests, the NVIDIA card wins both, and the margins are substantial.
In the 3DMark Steel Nomad DX12 test, the RTX PRO 4000 Blackwell scores 4648 points, while the RX 590 GME manages only 1001 points. This represents a delta of -78.5% for the AMD card, meaning the NVIDIA solution delivers roughly 4.6 times the performance in this workload. This is a modern DirectX 12 test that scales heavily with raw compute throughput and memory bandwidth, areas where the RTX PRO 4000 Blackwell holds a commanding advantage.
The Geekbench Vulkan test tells a similar story. The RTX PRO 4000 Blackwell records a score of 194168, compared to the RX 590 GME's 60508. The delta here is -68.8% for the AMD card. While slightly less lopsided than the Steel Nomad result, this still places the NVIDIA card at over three times the performance of the AMD offering. Vulkan performance is often a good indicator of driver efficiency and architecture scalability, and the data shows the Blackwell architecture pulling far ahead.
The overall average benchmark score in the database reinforces this gap. The RX 590 GME sits at an average of 32601 points across all recorded tests, while the RTX PRO 4000 Blackwell averages 27135 points. However, this aggregate figure is skewed because the AMD card has fewer recorded benchmarks, and the NVIDIA card's PassMark scores drag its average down. The direct head-to-head tests are the most reliable comparison, and they clearly favor the RTX PRO 4000 Blackwell.
Looking at percentile rankings, the RX 590 GME sits at the 77th percentile among all GPUs, which is actually higher than the RTX PRO 4000 Blackwell's 72nd percentile. This seems counterintuitive given the head-to-head results, but it reflects the different benchmark suites recorded for each card. The RX 590 GME's nearest rivals include the AMD FirePro S9300 X2 (0.2% delta), the AMD Radeon RX 7900 GRE (0.4% delta), and the AMD FirePro S10000 (0.7% delta). The NVIDIA RTX PRO 4000 Blackwell's nearest rivals are the AMD Radeon RX 6700 XT (-1.1% delta), the NVIDIA GeForce RTX 4070 Mobile (-1.1% delta), and the NVIDIA GeForce RTX 3090 (-1.6% delta). These rival groups show that the RTX PRO 4000 Blackwell competes in a much higher performance tier than the RX 590 GME.
FAQ
Q: Which card is faster in DirectX 12 workloads?
A: The NVIDIA RTX PRO 4000 Blackwell is significantly faster. In the 3DMark Steel Nomad DX12 test, it scores 4648 points versus the AMD Radeon RX 590 GME's 1001 points, a -78.5% delta for the AMD card.
Q: How do the two cards compare in Vulkan performance?
A: The RTX PRO 4000 Blackwell dominates here as well. Its Geekbench Vulkan score of 194168 is nearly three times the RX 590 GME's 60508, representing a -68.8% delta for the AMD card.
Q: What is the memory configuration difference?
A: The AMD Radeon RX 590 GME has 8 GB of GDDR5 memory on a 256-bit bus with 256.0 GB/s bandwidth. The NVIDIA RTX PRO 4000 Blackwell has 24 GB of GDDR7 memory on a 192-bit bus with 672.0 GB/s bandwidth.
Q: Are these cards from the same generation?
A: No. The RX 590 GME is based on the Polaris architecture (GCN 4.0) and was released in March 2020. The RTX PRO 4000 Blackwell is based on the Blackwell 2.0 architecture and was released in March 2025.
Q: Which card has a higher boost clock?
A: The NVIDIA RTX PRO 4000 Blackwell has a boost clock of 2055 MHz, while the AMD Radeon RX 590 GME has a boost clock of 1420 MHz.
Q: How do the power requirements compare?
A: The RTX PRO 4000 Blackwell has a TDP of 140 W and requires a 300 W power supply. The RX 590 GME has a TDP of 175 W and requires a 450 W power supply, despite being significantly less powerful.
The Verdict
The data points to one clear conclusion: the NVIDIA RTX PRO 4000 Blackwell is the overwhelmingly superior product in terms of raw performance. It wins both recorded head-to-head benchmarks by massive margins, offers more than three times the FP32 compute throughput, and provides significantly more memory bandwidth.
However, the correct choice depends entirely on the use case. The RTX PRO 4000 Blackwell is an active, current-generation workstation card with 24 GB of GDDR7 memory, 70 RT cores, and 280 tensor cores. It is designed for modern professional workloads, AI acceleration, and ray-traced content. The RX 590 GME is an end-of-life product from the Polaris generation, built on a 14 nm process with no dedicated RT or tensor cores. Its 8 GB of GDDR5 memory and 256 GB/s bandwidth are simply not in the same class.
For anyone building a system for contemporary 3D rendering, AI inference, or high-end professional visualization, the RTX PRO 4000 Blackwell is the only rational choice from this comparison. Its 36.83 TFLOPS FP32 performance, 197.3 GPixel/s pixel rate, and 575.4 GTexel/s texture rate dwarf the RX 590 GME's 6.543 TFLOPS, 45.44 GPixel/s, and 204.5 GTexel/s respectively.
The RX 590 GME might be considered for legacy applications or systems where its older architecture and specific driver characteristics are required, but the performance gap is so large that even then, the RTX PRO 4000 Blackwell would likely handle those tasks faster. The only area where the RX 590 GME has a nominal advantage is its lower transistor density (24.6M per mm² versus 120.6M per mm²), which is not a performance metric.
Specification Differences
The two cards differ in nearly every core specification. The AMD Radeon RX 590 GME features 2304 shading units, 144 texture mapping units, and 32 render output units. The NVIDIA RTX PRO 4000 Blackwell has 8960 shading units, 280 TMUs, and 96 ROPs. This translates to vastly different fill rates: the NVIDIA card outputs 197.3 GPixel/s and 575.4 GTexel/s, while the AMD card manages 45.44 GPixel/s and 204.5 GTexel/s.
The FP32 compute performance is another major divider. The RX 590 GME delivers 6.543 TFLOPS, while the RTX PRO 4000 Blackwell delivers 36.83 TFLOPS, a 5.6 times difference. FP16 performance follows the same 1:1 ratio for both cards, with the same respective figures.
Memory specifications are also starkly different. The RX 590 GME uses 8 GB of GDDR5 on a 256-bit bus, achieving 256.0 GB/s bandwidth. The RTX PRO 4000 Blackwell uses 24 GB of GDDR7 on a 192-bit bus, achieving 672.0 GB/s bandwidth. Despite the narrower bus, the newer GDDR7 memory at 28 Gbps effective speed provides over 2.6 times the bandwidth.
The physical cards differ as well. The RX 590 GME is a dual-slot card requiring one 8-pin power connector and a 450 W power supply. The RTX PRO 4000 Blackwell is a single-slot card requiring one 16-pin connector and a 300 W power supply. Both are 241 mm (9.5 inches) in length, but the NVIDIA card is slimmer at 20 mm width versus the unspecified width of the AMD card.
Architecture Differences
The architectural gap between these two GPUs is generational. The AMD Radeon RX 590 GME uses the Polaris 20 chip built on GCN 4.0 architecture, produced on a 14 nm process at GlobalFoundries. This chip contains 5,700 million transistors on a 232 mm² die, resulting in a transistor density of 24.6 million per mm². GCN 4.0 lacks dedicated ray tracing cores and tensor cores, relying entirely on traditional shader units for all compute tasks.
The NVIDIA RTX PRO 4000 Blackwell uses the GB203 chip built on Blackwell 2.0 architecture, produced on a 5 nm process at TSMC. This chip contains 45,600 million transistors on a 378 mm² die, resulting in a transistor density of 120.6 million per mm². The Blackwell architecture includes 70 dedicated RT cores and 280 tensor cores, enabling hardware-accelerated ray tracing and AI processing that the GCN 4.0 architecture simply cannot perform efficiently.
API support also differs. The RX 590 GME supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3. The RTX PRO 4000 Blackwell supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The newer DirectX 12 Ultimate feature set and higher Vulkan version indicate better support for modern rendering techniques and optimizations.
The bus interface also differs: the RX 590 GME uses PCIe 3.0 x16, while the RTX PRO 4000 Blackwell uses PCIe 5.0 x16. This provides the NVIDIA card with significantly more bandwidth for data transfers with the host system, which can matter in professional workloads with large datasets.
Where Each One Wins
Based strictly on the recorded data, the NVIDIA RTX PRO 4000 Blackwell wins in every benchmark category where both cards were tested. It is faster in 3DMark Steel Nomad DX12, faster in Geekbench Vulkan, and has superior compute, pixel, and texture rates across the board.
The RX 590 GME has no benchmark wins against the RTX PRO 4000 Blackwell. Its wins are limited to areas like lower transistor density and a lower TDP relative to its own performance class, but these are not advantages when compared directly to the NVIDIA card.
For professional users working with modern 3D applications, AI inference, or high-resolution video processing, the RTX PRO 4000 Blackwell is the clear pick. Its 24 GB memory buffer, 70 RT cores, and 280 tensor cores make it suitable for tasks that the RX 590 GME cannot handle at all, such as hardware-accelerated ray tracing and tensor-based AI workloads.
The RX 590 GME might still be useful for legacy software that requires older GCN architecture support or for systems where the 175 W TDP and dual-slot form factor are acceptable. However, even in those scenarios, the RTX PRO 4000 Blackwell's lower 140 W TDP and single-slot design make it more efficient, and its PCIe 5.0 interface ensures forward compatibility.
In summary, the RTX PRO 4000 Blackwell is the superior choice for nearly every conceivable workload, with the RX 590 GME offering no practical advantage except for situations that specifically require the older Polaris architecture. The performance delta is simply too large to recommend the AMD card for any modern use case.