AMD Radeon RX 560 vs NVIDIA GeForce RTX 5060 Ti 8 GB Comparison

AMD
RADEON

AMD Radeon RX 560

CORE STATE Polaris 21
VRAM 4 GB
CLOCK SPEED 1275 MHz
TDP 75 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 4.0
nm
PROCESS 14 nm
LAUNCH DATE 2017
VS
NVIDIA
GEFORCE

GeForce RTX 5060 Ti 8 GB

CORE STATE GB206
VRAM 8 GB
CLOCK SPEED 2572 MHz
TDP 180 W
BUS WIDTH 128 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
18,941
N/A
geekbench_opencl
16,472
N/A
passmark_directx_10
16
142
passmark_directx_11
25
220
passmark_directx_12
21
82
passmark_directx_9
57
228
passmark_g2d
485
1,169
passmark_g3d
3,671
21,981
passmark_gpu_compute
1,437
11,365
3dmark_3dmark_steel_nomad_dx12
N/A
4,019

Analysis: AMD Radeon RX 560 vs NVIDIA GeForce RTX 5060 Ti 8 GB

# NVIDIA GeForce RTX 5060 Ti 8 GB vs AMD Radeon RX 560

The NVIDIA GeForce RTX 5060 Ti 8 GB and AMD Radeon RX 560 represent two vastly different eras of GPU design, separated by eight years of architectural evolution. The GeForce 50-series card, built on TSMC's 5 nm process, delivers benchmark results that dwarf the Polaris-based RX 560 in every measured category. The data shows a complete sweep: the RTX 5060 Ti wins all seven head-to-head comparisons, with margins ranging from 141% to 787.5%. This is not a close contest; it is a generational gap expressed in raw numbers.

Head-to-Head Benchmarks

The largest single margin appears in DirectX 10 performance, where the RTX 5060 Ti scores 142 against the RX 560's 16, a delta of 787.5%. This is followed closely by DirectX 11, where the NVIDIA card posts 220 versus 25, a 780% advantage. These legacy API results highlight the massive architectural leap; the RX 560's GCN 4.0 design was already dated when DirectX 12 became standard, and the RTX 5060 Ti's Blackwell 2.0 architecture simply obliterates it in older workloads.

In compute-oriented tasks, the gap remains enormous. The Passmark GPU Compute test shows the RTX 5060 Ti scoring 11,365 against the RX 560's 1,437, a 690.9% difference. This is consistent with the raw FP32 throughput figures: the NVIDIA card delivers 23.70 TFLOPS versus 2.611 TFLOPS for the AMD part, a roughly 9x advantage in raw shader throughput. The DirectX 9 result follows the same pattern, with 228 versus 57 (300% delta), while DirectX 12 shows 82 versus 21 (290.5% delta).

The most representative overall metric, Passmark G3D, tells a similar story: 21,981 for the RTX 5060 Ti versus 3,671 for the RX 560, a 498.8% delta. Even the 2D graphics test, which typically rewards memory bandwidth and fillrate rather than shader count, shows a 141% advantage (1,169 versus 485). Across every test, the RTX 5060 Ti holds a minimum 2.4x performance lead, and in most cases the lead exceeds 4x. The average benchmark scores reflect this: 4,901 for the NVIDIA card versus 4,569 for the AMD card, though this narrow gap is misleading because the averages include different test suites. The RTX 5060 Ti's percentile rank among all GPUs is 29, while the RX 560 sits at 26, but the head-to-head deltas reveal the true scale of the difference. Notably, the RTX 5060 Ti's nearest rivals in average score are mobile and low-end parts like the AMD FirePro W5130M and NVIDIA GeForce GTS 450, while the RX 560's nearest rivals include the Intel HD Graphics P530 and NVIDIA Quadro M3000M — an indication that both cards sit in the lower half of the performance distribution, but the RTX 5060 Ti does so with far more headroom.

Where Each One Wins

The RTX 5060 Ti wins every benchmark category in the data set, so the question is not where it wins, but where its advantage is most decisive. The largest margins come in legacy DirectX APIs (10 and 11) and compute workloads, where the NVIDIA card's 4,608 shading units and 144 tensor cores provide overwhelming parallelism compared to the RX 560's 1,024 shading units and no tensor or ray-tracing hardware. For users running modern games with DirectX 12, the RTX 5060 Ti's 290.5% lead in that specific test is the most relevant figure, though the absolute scores (82 versus 21) suggest both cards struggle with the most demanding 12_2 workloads — the NVIDIA card supports DirectX 12 Ultimate (12_2), while the RX 560 only reaches DirectX 12 (12_0).

The RX 560's only "win" is contextual: it consumes far less power (75 W TDP versus 180 W) and requires no external power connectors, making it suitable for legacy systems with weak power supplies. Its 4 GB GDDR5 memory, while half the capacity of the RTX 5060 Ti's 8 GB GDDR7, is sufficient for older titles at lower resolutions. However, in pure performance terms, the RX 560 has no winning category. Its best relative showing is in the DirectX 12 test, where the delta drops to 290.5%, and in 2D graphics, where the delta is 141% — still a decisive loss. The data suggests the RX 560 is best viewed as a legacy 1080p card for older APIs, while the RTX 5060 Ti, despite its low percentile rank, is a modern part that can handle current-generation features.

Architecture Differences

The architectural gap between these two GPUs is the story of a decade of GPU evolution compressed into a single comparison. The RTX 5060 Ti uses the GB206 chip on NVIDIA's Blackwell 2.0 architecture, fabricated on a 5 nm process at TSMC. It packs 21,900 million transistors into a 181 mm² die, yielding a transistor density of 121.0M per mm². The RX 560, in contrast, uses the Polaris 21 chip on AMD's GCN 4.0 architecture, built on GlobalFoundries' 14 nm process. It contains just 3,000 million transistors on a 123 mm² die, with a density of 24.4M per mm² — roughly one-fifth the density of the NVIDIA chip.

The compute resources differ by a similar magnitude. The RTX 5060 Ti has 4,608 shading units, 144 texture mapping units, and 48 ROPs, alongside 36 ray-tracing cores and 144 tensor cores. The RX 560 has 1,024 shading units, 64 TMUs, and 16 ROPs, with no dedicated ray-tracing or tensor hardware. This explains the massive FP32 and FP16 throughput disparity: both cards run FP16 at a 1:1 ratio with FP32, but the RTX 5060 Ti's 23.70 TFLOPS dwarfs the RX 560's 2.611 TFLOPS. The pixel and texture rates follow suit — 123.5 GPixel/s and 370.4 GTexel/s for the NVIDIA card versus 20.40 GPixel/s and 81.60 GTexel/s for the AMD card.

Memory architecture also diverges sharply. The RTX 5060 Ti uses 8 GB of GDDR7 on a 128-bit bus, achieving 448.0 GB/s of bandwidth. The RX 560 uses 4 GB of GDDR5 on the same 128-bit bus, but only reaches 112.0 GB/s — exactly one-quarter the bandwidth. Both cards run memory at 1750 MHz, but the effective data rate differs: 28 Gbps for GDDR7 versus 7 Gbps for GDDR5. The interface generation also matters: the RTX 5060 Ti uses PCIe 5.0 x8, while the RX 560 is stuck on PCIe 3.0 x8. This quadruples the available host bandwidth for the NVIDIA card, though in practice the GPU's own memory bandwidth is the more critical factor.

Specification Differences

The two cards differ in nearly every measurable specification. The RTX 5060 Ti has a base clock of 2407 MHz and boost clock of 2572 MHz, versus 1175 MHz base and 1275 MHz boost for the RX 560 — roughly a 2x clock advantage for the NVIDIA card. Memory capacity is 8 GB versus 4 GB, memory type is GDDR7 versus GDDR5, and memory bandwidth is 448.0 GB/s versus 112.0 GB/s. The TDP is 180 W versus 75 W, with the RTX 5060 Ti requiring a single 8-pin power connector and a 450 W suggested PSU, while the RX 560 draws power purely from the PCIe slot and needs only a 250 W PSU. The RTX 5060 Ti is also physically larger at 241 mm in length versus 170 mm for the RX 560, though both are dual-slot designs.

Display outputs differ as well: the RTX 5060 Ti offers 1x HDMI 2.1b and 3x DisplayPort 2.1b, while the RX 560 provides 1x DVI, 1x HDMI 2.0b, and 1x DisplayPort 1.4a. API support shows the generational leap: the RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the RX 560 maxes out at DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3. The production status also differs — the RTX 5060 Ti is Active, released on 2025-04-15, while the RX 560 is End-of-life, released on 2017-04-17. The launch MSRP for the RTX 5060 Ti is 379 USD, while the RX 560 launched at 99 USD.

FAQ

Q: Which card has better raw performance?

A: The RTX 5060 Ti wins every head-to-head benchmark. Its Passmark G3D score of 21,981 is 498.8% higher than the RX 560's 3,671, and its GPU Compute score of 11,365 is 690.9% higher than 1,437.

Q: How do the memory subsystems compare?

A: The RTX 5060 Ti has 8 GB of GDDR7 with 448.0 GB/s bandwidth, while the RX 560 has 4 GB of GDDR5 with 112.0 GB/s. Both use a 128-bit bus, but the GDDR7's 28 Gbps effective data rate quadruples the AMD card's 7 Gbps.

Q: Is the RX 560 better for low-power systems?

A: Yes. The RX 560 has a 75 W TDP and requires no external power connectors, versus 180 W and a single 8-pin connector for the RTX 5060 Ti. The suggested PSU is 250 W for the AMD card versus 450 W for the NVIDIA card.

Q: Do both cards support modern APIs?

A: No. The RTX 5060 Ti supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RX 560 only reaches DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, and lacks ray-tracing and tensor hardware entirely.

Q: What is the biggest performance gap between them?

A: The largest delta is in DirectX 10, where the RTX 5060 Ti scores 142 versus 16, a 787.5% advantage. DirectX 11 is nearly as large at 780% (220 versus 25).

Q: How do their production statuses differ?

A: The RTX 5060 Ti is listed as Active with a release date of 2025-04-15, while the RX 560 is End-of-life with a release date of 2017-04-17. The NVIDIA card's predecessor is the GeForce 40 series and its successor is GeForce 60, while the RX 560's predecessor is Arctic Islands and its successor is Vega.

DETAILED SPECIFICATIONS

SPECIFICATION
RX 560
RTX 5060 Ti 8 GB
Core Specs
Shading Units
1,024
4,608 +350.0%
Shaders
1,024
4,608 +350.0%
TMUs
64
144 +125.0%
ROPs
16
48 +200.0%
Compute Units
16
—
SM Count
—
36
Clocks
Base Clock
1175 MHz
2407 MHz
Boost Clock
1275 MHz
2572 MHz
Memory Clock
1750 MHz 7 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
8 GB
VRAM (MB)
4,096
8,192 +100.0%
Memory Type
GDDR5
GDDR7
Memory Bus
128 bit
128 bit
Bandwidth
112.0 GB/s
448.0 GB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
1024 KB
32 MB
Performance
Pixel Rate
20.40 GPixel/s
123.5 GPixel/s
Texture Rate
81.60 GTexel/s
370.4 GTexel/s
FP32 (TFLOPS)
2.611 TFLOPS
23.70 TFLOPS
FP64 (TFLOPS)
163.2 GFLOPS (1:16)
370.4 GFLOPS (1:64)
FP16 (TFLOPS)
2.611 TFLOPS (1:1)
23.70 TFLOPS (1:1)
AI/RT
RT Cores
—
36
Tensor Cores
—
144
Power
TDP
75 W
180 W
TDP (W)
75
180 +140.0%
Suggested PSU
250 W
450 W
Power Connectors
None
1x 8-pin
Architecture
Architecture
GCN 4.0
Blackwell 2.0
GPU Name
Polaris 21
GB206
Generation
Polaris (RX 500)
GeForce 50
Process Size
14 nm
5 nm
Transistors
3,000 million
21,900 million
Die Size
123 mm²
181 mm²
Foundry
GlobalFoundries
TSMC
Density
24.4M / mm²
121.0M / mm²
API Support
DirectX
12 (12_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.7
6.9
Physical
Slot Width
Dual-slot
Dual-slot
Length
170 mm 6.7 inches
241 mm 9.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x DVI1x HDMI 2.0b1x DisplayPort 1.4a
1x HDMI 2.1b3x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x8
Other
Launch Price
99 USD
379 USD
Production
End-of-life
Active
Predecessor
Arctic Islands
GeForce 40
Successor
Vega
GeForce 60
View Radeon RX 560 Details View GeForce RTX 5060 Ti 8 GB Details