AMD Radeon RX 560 vs AMD Radeon RX 9060 XT 16 GB Comparison
AMD Radeon RX 560
Radeon RX 9060 XT 16 GB
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 560 vs AMD Radeon RX 9060 XT 16 GB
The AMD Radeon RX 9060 XT 16 GB is in a completely different performance class than the AMD Radeon RX 560, winning every single head-to-head benchmark by margins ranging from 141% to over 680%. The RX 560, an end-of-life Polaris part from 2017, is outclassed on every metric, from raw rasterization to compute throughput, making the RX 9060 XT the only rational choice for any modern workload, provided the system can support its higher power requirements.
Head-to-Head Benchmarks
The data leaves no room for ambiguity: the RX 9060 XT dominates the RX 560 across all seven recorded tests. The largest single victory comes in the Passmark GPU Compute test, where the RX 9060 XT scores 11,234 against the RX 560's 1,437, a delta of 681.8%. This indicates a massive advantage in general-purpose and compute-heavy tasks, far exceeding the gap seen in pure graphics tests.
In DirectX 11, the RX 9060 XT posts a score of 185 versus 25 for the RX 560, a 640% advantage. The older card trails even further in DirectX 10, with a score of 16 against the RX 9060 XT's 116, representing a 625% difference. These legacy API results show that the newer architecture is not just faster in modern workloads but also provides substantially better performance in older titles.
The DirectX 9 test shows a 435.1% lead for the RX 9060 XT (305 vs. 57), and DirectX 12 sees a 171.4% delta (57 vs. 21). While the DirectX 12 delta is the smallest percentage gap on the list, it still represents a decisive win for the RX 9060 XT. The overall 3D performance, measured by Passmark G3D, shows a score of 20,099 for the RX 9060 XT versus 3,671 for the RX 560, a 447.5% difference that characterizes the generational gulf between the two.
Even in the 2D-focused Passmark G2D test, the RX 9060 XT wins with a score of 1,169 against 485, a 141% lead. This suggests the newer card also offers better desktop compositing and 2D acceleration. The RX 9060 XT wins all 7 benchmarks, while the RX 560 wins none, underscoring a total lack of competitive parity.
FAQ
Q: How much faster is the RX 9060 XT in overall 3D performance?
A: In the Passmark G3D benchmark, the RX 9060 XT scores 20,099, which is 447.5% higher than the RX 560's score of 3,671.
Q: Which card has the higher average benchmark score?
A: The RX 9060 XT has an average benchmark score of 4,657, while the RX 560 has an average score of 4,569. Despite the close averages, the RX 9060 XT is faster in every individual test.
Q: What is the performance difference in compute workloads?
A: In the Passmark GPU Compute test, the RX 9060 XT scores 11,234 versus 1,437 for the RX 560, a 681.8% advantage for the newer card.
Q: Does the RX 560 win any benchmark?
A: No. The RX 9060 XT wins all 7 head-to-head benchmarks, with no wins recorded for the RX 560.
Q: Which card has better DirectX 12 Ultimate support?
A: The RX 9060 XT supports DirectX 12 Ultimate (12_2), while the RX 560 is limited to DirectX 12 (12_0).
Q: How do the two cards compare in legacy DirectX 9 performance?
A: The RX 9060 XT scores 305 in the Passmark DirectX 9 test, which is 435.1% higher than the RX 560's score of 57.
Where Each One Wins
The RX 9060 XT is the clear winner across every benchmark category, but the specific use cases highlight why. For modern gaming, its DirectX 12 score of 57, while low in absolute terms, is 171.4% ahead of the RX 560's 21, indicating better compatibility and performance in current titles that use the API. Its DirectX 11 score of 185 is 640% higher, making it vastly superior for the vast library of games that still rely on this API.
For compute and professional applications, the 681.8% lead in GPU compute makes the RX 9060 XT the only viable option for tasks like rendering or data processing. Its 16 GB of GDDR6 memory, against the RX 560's 4 GB of GDDR5, provides a substantial capacity advantage for large datasets and high-resolution textures, a factor not directly captured in the listed benchmarks but critical for real-world workloads.
The RX 560 wins in exactly one category: power consumption. Its 75 W TDP and lack of power connectors make it a drop-in upgrade for older systems with minimal power supply headroom, whereas the RX 9060 XT requires a 160 W TDP, a single 8-pin connector, and a suggested 450 W PSU. For a user with a legacy 250 W power supply and no PCIe power cables, the RX 560 is the only card that will function.
Specification Differences
The two cards differ in nearly every measurable specification. The RX 9060 XT has 2,048 shading units, 128 TMUs, and 64 ROPs, while the RX 560 has 1,024 shading units, 64 TMUs, and only 16 ROPs. The RX 9060 XT also features 32 dedicated ray tracing cores, which are entirely absent from the RX 560.
Memory configurations are starkly different: the RX 9060 XT has 16 GB of GDDR6 on a 128-bit bus, delivering 322.3 GB/s of bandwidth, while the RX 560 has 4 GB of GDDR5 on a 128-bit bus, providing only 112.0 GB/s. Clock speeds also diverge significantly, with the RX 9060 XT boosting to 3130 MHz and the RX 560 boosting to just 1275 MHz.
The bus interface differs as well: the RX 9060 XT uses PCIe 5.0 x16, while the RX 560 uses the older PCIe 3.0 x8 standard. Display outputs are also different, with the RX 9060 XT offering 1x HDMI 2.1b and 2x DisplayPort 2.1a, while the RX 560 provides 1x DVI, 1x HDMI 2.0b, and 1x DisplayPort 1.4a. The RX 560 has a listed length of 170 mm (6.7 inches), while the RX 9060 XT's dimensions are not specified.
Architecture Differences
The architectural chasm is immense. The RX 9060 XT uses the Navi 44 chip based on RDNA 4.0 architecture, fabricated on TSMC's 4 nm process. It integrates 29,700 million transistors on a 199 mm² die, resulting in a transistor density of 149.2M / mm². In contrast, the RX 560 uses the Polaris 21 chip based on the older GCN 4.0 architecture, built on GlobalFoundries' 14 nm process. It contains only 3,000 million transistors on a 123 mm² die, with a density of just 24.4M / mm².
This process and design gap leads to a massive difference in raw throughput. The RX 9060 XT delivers 25.64 TFLOPS of FP32 performance, while the RX 560 delivers only 2.611 TFLOPS. The pixel rate is 200.3 GPixel/s for the newer card versus 20.40 GPixel/s for the older one, and the texture rate is 400.6 GTexel/s versus 81.60 GTexel/s. The RX 9060 XT supports DirectX 12 Ultimate (12_2) and Vulkan 1.4, while the RX 560 is limited to DirectX 12 (12_0) and Vulkan 1.3.
The RX 9060 XT belongs to the Radeon RX 9000 series (Navi IV generation) and was released on 2025-06-03, while the RX 560 is from the Polaris (RX 500) generation with a release date of 2017-04-17. The RX 9060 XT has a listed predecessor of Navi III, while the RX 560's predecessor is Arctic Islands and its successor is Vega. Production status also differs, with the RX 9060 XT marked as Active and the RX 560 as End-of-life.
The Verdict
The choice is clear-cut based on benchmark data. The RX 9060 XT is superior in every single performance test, with leads from 141% in 2D to 681.8% in compute. Its modern architecture, 16 GB memory, and higher bandwidth make it the definitive choice for gaming, content creation, or any GPU-accelerated workload. The launch MSRP is 349 USD, which reflects its positioning as a mainstream performer.
The RX 560, with a launch MSRP of 99 USD, is obsolete for any demanding task. Its only advantage is its minimal power draw and lack of external power connectors, which allows it to operate in systems with very weak power supplies. Its percentile ranking of 26 versus the RX 9060 XT's 27 shows they sit in a similar overall position among all GPUs, but this is misleading; the RX 9060 XT's nearest rivals are the NVIDIA Quadro P400 and GeForce GTX 970M, while the RX 560's rivals include the Intel HD Graphics P530 and AMD Radeon R5 M230, confirming the massive performance gap.
Any user seeking a new card should select the RX 9060 XT, provided their power supply meets the 450 W recommendation. The RX 560 should only be considered for a legacy system that cannot accommodate a power connector or a higher wattage PSU, where its low power draw is the deciding factor. For all other purposes, the data unequivocally favors the RX 9060 XT.