AMD Radeon RX 550X vs NVIDIA RTX PRO 6000D Blackwell Max-Q Comparison
AMD Radeon RX 550X
RTX PRO 6000D Blackwell Max-Q
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon RX 550X vs NVIDIA RTX PRO 6000D Blackwell Max-Q
The NVIDIA RTX PRO 6000D Blackwell Max-Q and the AMD Radeon RX 550X occupy opposite ends of the GPU spectrum, and the benchmark data reflects this divide clearly. The RTX PRO 6000D scores 11,088 in 3DMark Steel Nomad DX12, placing it at the 50th percentile of all GPUs, while the RX 550X averages 10,481 across Geekbench OpenCL and Vulkan tests, sitting at the 49th percentile. Despite the apparent closeness in these aggregate percentiles, their performance profiles are fundamentally different. The RTX PRO 6000D is statistically tied with its own sibling, the NVIDIA RTX PRO 6000 Blackwell Max-Q, at a 0% delta, and sits marginally ahead of the AMD Radeon RX 550 (0.1%) and NVIDIA GeForce GTX 1650 SUPER (0.4%). The RX 550X, in contrast, is bracketed by older and mobile-class parts: it trails the AMD Radeon R9 M275X by 1%, leads the NVIDIA Tesla C2075 by 0.8%, and sits between the AMD Radeon RX 6500M (1.2% ahead) and the AMD Radeon RX 6600S (1.4% behind). These deltas show that the RX 550X is competing in a far lower performance tier, where single-digit percentage differences define its position.
Head-to-Head Benchmarks
The two GPUs in this comparison share no common benchmark test. The NVIDIA RTX PRO 6000D Blackwell Max-Q was evaluated exclusively with 3DMark Steel Nomad DX12, producing a score of 11,088. The AMD Radeon RX 550X was instead tested with Geekbench OpenCL and Geekbench Vulkan, yielding scores of 9,662 and 11,299 respectively. Because the test suites do not overlap, a direct numerical comparison is impossible. However, the relative positioning against their respective nearest rivals tells a clear story.
The RTX PRO 6000D’s 3DMark Steel Nomad score of 11,088 places it 0.1% above the AMD Radeon RX 550 (11,075) and 0.4% above the NVIDIA GeForce GTX 1650 SUPER (11,047). This suggests that in this particular DX12 workload, the RTX PRO 6000D performs essentially at parity with these mid-range consumer cards, despite its workstation classification. It also sits 1.2% behind the AMD FirePro W4300 (11,225), which is a notable outlier given the FirePro’s older architecture. The RX 550X’s Geekbench scores show a different pattern: its Vulkan result of 11,299 is significantly higher than its OpenCL result of 9,662, a 16.9% gap that indicates the GCN 4.0 architecture responds better to the Vulkan API. Against its rivals, the RX 550X’s average of 10,481 puts it 0.8% ahead of the NVIDIA Tesla C2075 (10,400) and 1.2% ahead of the AMD Radeon RX 6500M (10,362), while trailing the AMD Radeon R9 M275X (10,582) by 1% and the AMD Radeon RX 6600S (10,629) by 1.4%.
Interpreting these numbers requires understanding what they measure. The RTX PRO 6000D’s single Steel Nomad score is a modern DX12 benchmark that stresses ray tracing and mesh shading, whereas the RX 550X’s Geekbench tests are compute-oriented and cross-platform. The RTX PRO 6000D’s performance is consistent with its 50th percentile ranking, meaning half of all GPUs score higher and half lower. The RX 550X’s 49th percentile is nearly identical in rank, but the absolute score gap is substantial: the RTX PRO 6000D’s single benchmark score of 11,088 is 5.8% higher than the RX 550X’s average of 10,481. In practical terms, the data indicates that the RTX PRO 6000D offers a higher absolute level of graphics throughput, but the RX 550X is not far behind in raw benchmark numbers, which is remarkable given the generational and architectural chasm between them.
Architecture Differences
The architectural gap between these two GPUs is vast, and it is visible in nearly every specification. The NVIDIA RTX PRO 6000D Blackwell Max-Q uses the GB202 chip built on a 5 nm process at TSMC, containing 92,200 million transistors on a 750 mm² die, yielding a transistor density of 122.9 million per mm². The AMD Radeon RX 550X uses the Lexa chip on GlobalFoundries’ 14 nm process, with 2,200 million transistors on a 103 mm² die, giving a density of 21.4 million per mm². The NVIDIA chip is roughly 7.3 times larger in die area and packs 41.9 times more transistors. This scale difference translates directly into compute resources: the RTX PRO 6000D has 24,064 shading units, 752 texture mapping units, and 192 raster operation pipelines, versus 512 shaders, 32 TMUs, and 16 ROPs on the RX 550X.
Ray tracing and tensor hardware exist only on the NVIDIA side. The RTX PRO 6000D includes 188 RT cores and 752 tensor cores, while the RX 550X has neither, as its GCN 4.0 architecture predates dedicated ray tracing acceleration. Clock speeds also differ: the RTX PRO 6000D runs at a base of 1590 MHz and boosts to 2288 MHz, while the RX 550X has a base of 1100 MHz and a boost of 1183 MHz. Memory configurations are equally divergent. The NVIDIA card ships with 96 GB of GDDR7 on a 512-bit bus, delivering 1.79 TB/s of bandwidth, while the AMD card has 4 GB of GDDR5 on a 128-bit bus, providing 96.00 GB/s. The RTX PRO 6000D’s memory bandwidth is 18.6 times higher.
The feature set reflects their different eras. The RTX PRO 6000D supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while the RX 550X supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3. The NVIDIA card uses PCIe 5.0 x16, whereas the AMD card uses PCIe 3.0 x8. Display outputs also differ: the RTX PRO 6000D provides four DisplayPort 2.1b connections, while the RX 550X offers one DVI, one HDMI 2.0b, and one DisplayPort 1.4a. Power requirements are starkly different: the RTX PRO 6000D has a 300 W TDP, a single 16-pin power connector, and a suggested 700 W power supply, while the RX 550X has a 50 W TDP, no external power connectors, and a suggested 250 W PSU.
FAQ
Q: How do the benchmark scores compare between the two GPUs?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q scored 11,088 in 3DMark Steel Nomad DX12. The AMD Radeon RX 550X averaged 10,481 across Geekbench OpenCL (9,662) and Vulkan (11,299). The RTX PRO 6000D’s score is 5.8% higher than the RX 550X’s average.
Q: Which GPU has a higher transistor density?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q has a transistor density of 122.9 million per mm² on a 5 nm TSMC process. The AMD Radeon RX 550X has a density of 21.4 million per mm² on a 14 nm GlobalFoundries process.
Q: Does the AMD Radeon RX 550X support ray tracing?
A: No. The RX 550X has no RT cores or tensor cores. The NVIDIA RTX PRO 6000D Blackwell Max-Q includes 188 RT cores and 752 tensor cores.
Q: What is the memory size difference?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q has 96 GB of GDDR7 memory on a 512-bit bus. The AMD Radeon RX 550X has 4 GB of GDDR5 memory on a 128-bit bus.
Q: Which GPU requires a more powerful power supply?
A: The NVIDIA RTX PRO 6000D Blackwell Max-Q has a 300 W TDP and requires a 700 W power supply. The AMD Radeon RX 550X has a 50 W TDP and requires a 250 W power supply.
Q: Are both GPUs still in production?
A: No. The NVIDIA RTX PRO 6000D Blackwell Max-Q is listed as Active, while the AMD Radeon RX 550X is End-of-life. The RX 550X was released in December 2018, and the RTX PRO 6000D was released in March 2025.
The Verdict
The data supports a clear split. The NVIDIA RTX PRO 6000D Blackwell Max-Q is a current-generation workstation card with 96 GB of memory, 24,064 shading units, and 188 RT cores, designed for compute-heavy and ray-traced workloads. Its 3DMark Steel Nomad score of 11,088 places it at the 50th percentile, and it is essentially tied with the AMD Radeon RX 550 and NVIDIA GeForce GTX 1650 SUPER in that specific test. The AMD Radeon RX 550X is an end-of-life entry-level card with 4 GB of memory and 512 shaders, scoring 10,481 on average and sitting at the 49th percentile. Its performance is competitive with a narrow band of older or mobile GPUs, such as the NVIDIA Tesla C2075 and AMD Radeon RX 6500M.
For buyers needing maximum memory capacity, modern API support, and ray tracing, the RTX PRO 6000D is the only option. For users with minimal power budgets or legacy system requirements, the RX 550X’s 50 W TDP and lack of external power connectors are decisive advantages. The RTX PRO 6000D also carries a launch MSRP of 8,565 USD, which positions it as a professional tool, whereas the RX 550X has no recorded launch MSRP. The production statuses confirm the direction: the RTX PRO 6000D is active, and the RX 550X is end-of-life.
Specification Differences
The two GPUs differ in every major specification category. The NVIDIA RTX PRO 6000D Blackwell Max-Q uses a 5 nm process with 92,200 million transistors on a 750 mm² die; the AMD Radeon RX 550X uses a 14 nm process with 2,200 million transistors on a 103 mm² die. The RTX PRO 6000D has 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores; the RX 550X has 512 shaders, 32 TMUs, 16 ROPs, and no RT or tensor cores. Base clocks are 1590 MHz versus 1100 MHz, and boost clocks are 2288 MHz versus 1183 MHz. Memory is 96 GB GDDR7 on a 512-bit bus with 1.79 TB/s bandwidth versus 4 GB GDDR5 on a 128-bit bus with 96.00 GB/s bandwidth. The RTX PRO 6000D has a 300 W TDP, one 16-pin connector, and a 700 W suggested PSU; the RX 550X has a 50 W TDP, no power connectors, and a 250 W suggested PSU. The bus interface is PCIe 5.0 x16 versus PCIe 3.0 x8. Display outputs are four DisplayPort 2.1b versus one DVI, one HDMI 2.0b, and one DisplayPort 1.4a. API support differs: DirectX 12 Ultimate (12_2) versus DirectX 12 (12_0), and Vulkan 1.4 versus 1.3. The physical dimensions are 267 mm length, 111 mm height, and 40 mm width for the RTX PRO 6000D, versus 145 mm length for the RX 550X. The RTX PRO 6000D is 300 W, and the RX 550X is 50 W.
Where Each One Wins
The NVIDIA RTX PRO 6000D Blackwell Max-Q wins on raw processing capability. Its FP32 throughput of 110.1 TFLOPS dwarfs the RX 550X’s 1,211.4 GFLOPS, and its pixel rate of 439.3 GPixel/s versus 18.93 GPixel/s shows an order-of-magnitude advantage in rasterization. Its texture rate of 1,720.6 GTexel/s compares to 37.86 GTexel/s on the RX 550X. The RTX PRO 6000D also wins on memory capacity (96 GB versus 4 GB), bandwidth (1.79 TB/s versus 96.00 GB/s), and API support (DirectX 12 Ultimate and Vulkan 1.4). It is the only card with ray tracing and tensor cores.
The AMD Radeon RX 550X wins on power efficiency and simplicity. Its 50 W TDP is one-sixth of the RTX PRO 6000D’s 300 W, and it requires no external power connectors and only a 250 W power supply. Its 145 mm length makes it a compact option for small form factor systems. The RX 550X’s Vulkan score of 11,299 is also higher than its OpenCL score, indicating strong Vulkan compute performance relative to its size. Its nearest rivals are all older or mobile parts, suggesting it remains relevant in low-power or legacy contexts. The RTX PRO 6000D’s nearest rivals, by contrast, include current mid-range consumer cards, showing that its benchmark performance is competitive with a broader market segment. The choice between them depends entirely on whether the user prioritizes maximum compute capability or minimal power draw.