AMD Radeon R9 M375X vs NVIDIA GeForce GTX 460 v2 Comparison
AMD Radeon R9 M375X
GeForce GTX 460 v2
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R9 M375X vs NVIDIA GeForce GTX 460 v2
The NVIDIA GeForce GTX 460 v2 and AMD Radeon R9 M375X represent two distinct eras of GPU design, separated by nearly four years of architectural evolution. Benchmark data from Geekbench shows a single head-to-head comparison where the NVIDIA card leads, but the full picture involves trade-offs in memory capacity, feature support, and raw compute potential. The GTX 460 v2 scores 8743 in Geekbench OpenCL, while the R9 M375X scores 8273, giving the older NVIDIA part a 5.7% advantage. This places the GTX 460 v2 in the 44th percentile of all GPUs, while the R9 M375X sits just one percentile lower at 43. The NVIDIA card’s average benchmark score of 8743 aligns with its single test result, whereas the AMD card’s average of 8325 reflects both its OpenCL and Vulkan scores.
Head-to-Head Benchmarks
The only direct benchmark comparison available is Geekbench OpenCL, and the result is clear. The NVIDIA GeForce GTX 460 v2 delivers 8743 points against 8273 for the AMD Radeon R9 M375X. That is a 5.7% delta in favor of the Fermi 2.0 part. While a 5.7% gap is not overwhelming, it is consistent and meaningful in a synthetic compute workload. The GTX 460 v2’s nearest rivals in the database are the NVIDIA GeForce RTX 3050 A Mobile at 8746 (0% delta) and the NVIDIA Quadro P2200 at 8686 (0.7% behind). This positioning suggests the GTX 460 v2 performs at a level comparable to much newer entry-level mobile and workstation parts, despite its 2011 vintage.
The R9 M375X, by contrast, sits adjacent to the NVIDIA Quadro K1200 (8265, 0.7% behind) and the NVIDIA GeForce GTX 675MX (8427, 1.2% ahead). The AMD card’s Vulkan score of 8377 is notably higher than its OpenCL score of 8273, indicating that the GCN architecture responds well to the Vulkan API. However, even the R9 M375X’s best available score falls short of the GTX 460 v2’s OpenCL result. The data shows a consistent, if modest, performance advantage for the NVIDIA part in compute tasks. The delta of 5.7% is the single most important number here, as it defines the entire head-to-head relationship between these two products.
Architecture Differences
The architectural chasm between these two GPUs is vast. The NVIDIA GeForce GTX 460 v2 uses the GF114 chip based on Fermi 2.0 architecture, fabricated on a 40 nm process at TSMC. It contains 1,950 million transistors on a 332 mm² die, yielding a transistor density of 5.9M per mm². The AMD Radeon R9 M375X uses the Tropo chip based on GCN 1.0, built on a 28 nm process, also at TSMC. This newer process allows AMD to pack 1,500 million transistors into a much smaller 123 mm² die, achieving a significantly higher transistor density of 12.2M per mm².
The compute resources are configured differently. The GTX 460 v2 has 336 shading units, 56 texture mapping units, and 24 ROPs. The R9 M375X counters with 640 shading units, 40 TMUs, and 16 ROPs. Despite having nearly twice the shading units, the AMD card’s pixel rate is higher at 16.24 GPixel/s versus 10.91 GPixel/s for the NVIDIA card. However, the texture rate tells a different story: the GTX 460 v2 achieves 43.62 GTexel/s, slightly ahead of the R9 M375X’s 40.60 GTexel/s. In raw FP32 throughput, the R9 M375X leads with 1,299.2 GFLOPS versus 1,046.3 GFLOPS for the GTX 460 v2.
Memory subsystems also diverge sharply. The GTX 460 v2 uses 1024 MB of GDDR5 on a 192-bit bus, delivering 96.19 GB/s of bandwidth. The R9 M375X offers 2 GB of GDDR5 but on a narrower 128-bit bus, capping bandwidth at 72.00 GB/s. The AMD card’s memory clock is 1125 MHz (4.5 Gbps effective), while the NVIDIA card’s memory runs at 1002 MHz (4 Gbps effective). The GTX 460 v2’s wider bus compensates for its lower clock speed, resulting in superior bandwidth. The R9 M375X has a base clock of 925 MHz and a boost clock of 1015 MHz, whereas the GTX 460 v2’s clock data is not provided in the pack.
Where Each One Wins
The NVIDIA GeForce GTX 460 v2 wins in the only head-to-head benchmark available, taking the Geekbench OpenCL test with a 5.7% margin. This result is likely driven by its higher memory bandwidth (96.19 GB/s versus 72.00 GB/s) and superior texture rate (43.62 GTexel/s versus 40.60 GTexel/s). The GTX 460 v2 also has a higher ROP count (24 versus 16), which can benefit certain pixel-bound workloads. For users prioritizing compute throughput in OpenCL-based applications, the data clearly favors the NVIDIA part. Its percentile rank of 44 versus 43 for the AMD card reinforces this edge, however slight.
The AMD Radeon R9 M375X wins in areas not covered by the head-to-head benchmark. Its FP32 compute output is 1,299.2 GFLOPS, which is 24.2% higher than the GTX 460 v2’s 1,046.3 GFLOPS. This raw compute advantage could translate to better performance in workloads that are not memory-bound. The R9 M375X also offers double the memory capacity at 2 GB versus 1 GB, which is critical for modern games and applications that exceed 1 GB of VRAM usage. Furthermore, the AMD card supports Vulkan 1.2.170, while the GTX 460 v2 has no Vulkan support listed. Its DirectX 12 (11_1) support is also newer than the GTX 460 v2’s DirectX 12 (11_0). The R9 M375X’s pixel rate of 16.24 GPixel/s is 49% higher than the NVIDIA card’s, suggesting better fill-rate-bound performance.
Specification Differences
The most glaring specification differences involve process node and physical characteristics. The GTX 460 v2 uses a 40 nm process, while the R9 M375X uses 28 nm. The NVIDIA chip is larger at 332 mm² versus 123 mm² for AMD, despite having more transistors (1,950 million versus 1,500 million). Transistor density reflects this: 5.9M per mm² for NVIDIA versus 12.2M per mm² for AMD. The GTX 460 v2 has a TDP of 160 W and requires dual-slot cooling with 2x 6-pin power connectors and a 450 W suggested PSU. The R9 M375X does not list TDP, slot width, power connectors, or suggested PSU in the data pack. The NVIDIA card measures 210 mm (8.3 inches) in length, while the AMD card has no listed dimensions.
Memory configuration differs in three key ways: capacity (1024 MB versus 2 GB), bus width (192-bit versus 128-bit), and bandwidth (96.19 GB/s versus 72.00 GB/s). The R9 M375X has a higher effective memory clock (4.5 Gbps versus 4 Gbps) but cannot overcome its narrower bus. Shading units are 336 for NVIDIA versus 640 for AMD, while TMUs are 56 versus 40, and ROPs are 24 versus 16. The GTX 460 v2 supports PCIe 2.0 x16, while the R9 M375X supports PCIe 3.0 x16. Display outputs are only listed for the NVIDIA card (2x DVI, 1x mini-HDMI 1.3a); the AMD card has no display output data. Both support OpenGL 4.6, but the AMD card adds Vulkan 1.2.170 support, which the NVIDIA card lacks. The GTX 460 v2 was released on 2011-09-23 with a launch MSRP of 199 USD, while the R9 M375X was released on 2015-05-04 with no listed MSRP.
FAQ
Q: Which GPU is faster in the Geekbench OpenCL benchmark?
A: The NVIDIA GeForce GTX 460 v2 scores 8743, which is 5.7% higher than the AMD Radeon R9 M375X’s score of 8273.
Q: How does the R9 M375X’s Vulkan score compare to its OpenCL score?
A: The R9 M375X achieves 8377 in Geekbench Vulkan, which is 104 points higher than its OpenCL score of 8273.
Q: Which card has more memory bandwidth?
A: The GTX 460 v2 has 96.19 GB/s of bandwidth, while the R9 M375X has 72.00 GB/s, a difference driven by the NVIDIA card’s 192-bit bus versus AMD’s 128-bit bus.
Q: What is the transistor density difference between the two chips?
A: The R9 M375X’s Tropo chip has a density of 12.2M transistors per mm², more than double the GTX 460 v2’s GF114 density of 5.9M per mm².
Q: Does the GTX 460 v2 support Vulkan?
A: No Vulkan support is listed for the GTX 460 v2. The R9 M375X supports Vulkan 1.2.170.
Q: Which GPU has a higher FP32 compute output?
A: The R9 M375X outputs 1,299.2 GFLOPS, which is 252.9 GFLOPS higher than the GTX 460 v2’s 1,046.3 GFLOPS.