AMD Radeon R7 M260X vs AMD Radeon R7 M265 Comparison
AMD Radeon R7 M260X
Radeon R7 M265
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R7 M260X vs AMD Radeon R7 M265
The AMD Radeon R7 M260X and AMD Radeon R7 M265 are both end-of-life mobile graphics chips from AMD’s Gem System (R7 M200) generation, built on the same Opal silicon and GCN 1.0 architecture. Despite sharing a common foundation, benchmark results show a clear performance gap, with the M260X achieving an average benchmark score of 5161 compared to the M265’s 4929, placing them at the 30th and 29th percentiles of all GPUs, respectively. The data indicates that the M260X holds a definitive edge in raw compute, though the M265 offers a larger memory pool that may appeal to specific use cases.
The Verdict
The benchmark data is unambiguous: the AMD Radeon R7 M260X is the faster GPU. In the sole head-to-head Geekbench OpenCL test, the M260X scores 5690 against the M265’s 4929, a decisive 15.4% advantage. This performance gap is reflected in their average scores, where the M260X leads by roughly 4.7% (5161 vs. 4929). For users prioritizing compute performance in OpenCL workloads, the M260X is the clear choice from this data.
However, the M265 is not without merit. It ships with 2 GB of memory compared to the M260X’s 1 GB, which could be a deciding factor for applications that require larger framebuffers or datasets. The M265’s average score of 4929 places it in a statistical tie with its nearest rivals, including the AMD Radeon R7 M360 (deltaPct 0) and the AMD FirePro W5130M (deltaPct 0.5), suggesting it is a baseline performer in its class.
The verdict hinges on the trade-off between speed and capacity. The M260X wins on every benchmark metric recorded, but the M265 offers double the memory. For users who need maximum compute throughput, the M260X is the superior part. For those who need more memory and can accept a performance hit, the M265 is the only option between the two. The data does not support choosing the M265 for performance reasons alone.
Architecture Differences
Both GPUs are built on the same physical foundation: the Opal chip, fabricated by TSMC on a 28 nm process, containing 950 million transistors on a 77 mm² die, yielding a transistor density of 12.3M per mm². They share identical core configurations, each with 384 shading units, 24 texture mapping units (TMUs), and 8 raster operation pipelines (ROPs). Neither GPU features dedicated ray tracing or tensor cores. Both support DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170, and both connect via a PCIe 3.0 x8 bus interface.
The key architectural differences lie in clock speeds and memory configuration. The M260X operates at a base clock of 620 MHz with a boost clock of 715 MHz, while the M265 runs higher at 725 MHz base and 825 MHz boost. This clock advantage gives the M265 higher theoretical throughput rates: a pixel rate of 6.600 GPixel/s versus the M260X’s 5.720 GPixel/s, a texture rate of 19.80 GTexel/s versus 17.16 GTexel/s, and FP32 performance of 633.6 GFLOPS versus 549.1 GFLOPS.
Memory is where the M260X counterattacks. The M260X uses 1024 MB of GDDR5 memory on a 128-bit bus, running at 1000 MHz (4 Gbps effective), delivering a bandwidth of 64.00 GB/s. The M265 uses 2 GB of DDR3 memory on the same 128-bit bus, but at a lower 900 MHz (1800 Mbps effective), resulting in a bandwidth of only 28.80 GB/s—less than half of the M260X’s. This bandwidth disparity is the primary factor explaining the M260X’s benchmark victory, despite its lower clock speeds.
Where Each One Wins
Based on the recorded benchmarks, the AMD Radeon R7 M260X wins in compute performance. Its Geekbench OpenCL score of 5690 is 15.4% higher than the M265’s 4929. This win is attributable to the M260X’s GDDR5 memory, which provides more than double the bandwidth (64.00 GB/s vs. 28.80 GB/s) of the M265’s DDR3. In memory-intensive compute tasks, the M260X should be expected to outperform the M265 significantly.
The AMD Radeon R7 M265 wins on memory capacity. With 2 GB of DDR3 versus the M260X’s 1 GB of GDDR5, the M265 can hold larger textures, buffers, or datasets in local memory. This could be an advantage in scenarios where capacity trumps bandwidth—for example, running applications that exceed the 1 GB limit of the M260X would force fallbacks to system memory, likely negating the M260X’s bandwidth advantage.
In terms of theoretical peak throughput, the M265 has higher clock-driven rates: 6.600 GPixel/s pixel rate, 19.80 GTexel/s texture rate, and 633.6 GFLOPS FP32, versus the M260X’s 5.720 GPixel/s, 17.16 GTexel/s, and 549.1 GFLOPS. However, the benchmark data shows that these theoretical advantages do not translate into real-world OpenCL wins, as the M265’s lower memory bandwidth becomes a bottleneck.
FAQ
Q: Which GPU has a higher average benchmark score?
A: The AMD Radeon R7 M260X has an average benchmark score of 5161, while the AMD Radeon R7 M265 scores 4929, giving the M260X a lead of approximately 4.7%.
Q: What is the difference in memory bandwidth between the two?
A: The M260X offers 64.00 GB/s of bandwidth using GDDR5 memory, while the M265 provides 28.80 GB/s using DDR3 memory. The M260X’s bandwidth is more than double that of the M265.
Q: How do the clock speeds compare?
A: The M265 runs at higher clocks: 725 MHz base and 825 MHz boost, compared to the M260X’s 620 MHz base and 715 MHz boost. The M265’s higher clocks give it superior theoretical pixel, texture, and FP32 rates.
Q: Does the M265 have any advantage over the M260X?
A: Yes, the M265 has 2 GB of memory, double the M260X’s 1 GB. This larger capacity could benefit workloads that require more memory, despite the M265’s lower bandwidth.
Q: What are the nearest rivals to the M260X based on average score?
A: The M260X’s nearest rivals include the NVIDIA Quadro K3100M (avg score 5154, deltaPct 0.1) and the NVIDIA Quadro 4000M (avg score 5211, deltaPct -1). The M260X is essentially tied with the Quadro K3100M.
Q: What are the nearest rivals to the M265 based on average score?
A: The M265’s nearest rivals include the AMD Radeon R7 M360 (avg score 4931, deltaPct 0) and the AMD FirePro W5130M (avg score 4904, deltaPct 0.5). The M265 is statistically tied with the R7 M360.
Head-to-Head Benchmarks
The only direct comparison available is the Geekbench OpenCL test, and it delivers a clear verdict. The AMD Radeon R7 M260X scores 5690, while the AMD Radeon R7 M265 scores 4929. This results in a delta of 15.4% in favor of the M260X, marking a decisive win for the older-but-wider-memory-bus part.
This 761-point gap is substantial. To contextualize, the M260X’s average score of 5161 places it within 0.1% of the NVIDIA Quadro K3100M (avg 5154) and 1.4% behind the NVIDIA GeForce GTX 760M (avg 5236). The M265’s average score of 4929, however, is a dead heat with the AMD Radeon R7 M360 (deltaPct 0) and just 0.5% ahead of the AMD FirePro W5130M (avg 4904). This suggests that while the M260X competes in a slightly higher performance tier, the M265 sits at the entry point of its class.
The reason for the M260X’s victory is evident from the memory specifications. The M260X’s GDDR5 memory operates at 1000 MHz with a 128-bit bus, yielding 64.00 GB/s of bandwidth. The M265’s DDR3 memory, also on a 128-bit bus, runs at 900 MHz and delivers just 28.80 GB/s. Even though the M265 has higher core clocks (825 MHz boost vs. 715 MHz boost) and higher theoretical FP32 (633.6 GFLOPS vs. 549.1 GFLOPS), the memory bandwidth deficit is crippling in OpenCL workloads. The M260X’s bandwidth advantage of 35.2 GB/s (64.00 vs. 28.80) more than compensates for its lower compute clocks.
In summary, the head-to-head data shows that memory bandwidth is the dominant factor in this matchup. The M260X wins the only benchmark test by 15.4%, and its average score is correspondingly higher. The M265’s higher clock speeds and larger memory pool do not overcome the M260X’s superior memory subsystem in the recorded metrics. For any OpenCL-based application, the M260X is the stronger performer.