AMD Radeon R7 350 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

AMD
RADEON

AMD Radeon R7 350

CORE STATE Cape Verde
VRAM 2 GB
CLOCK SPEED —
TDP 55 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2016
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_opencl
7,792
N/A
geekbench_vulkan
7,057
N/A
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5
passmark_directx_10
N/A
175
passmark_directx_11
N/A
219
passmark_directx_12
N/A
78
passmark_directx_9
N/A
311
passmark_g2d
N/A
914
passmark_g3d
N/A
24,310
passmark_gpu_compute
N/A
15,667

Analysis: AMD Radeon R7 350 vs NVIDIA RTX PRO 5000 72 GB Blackwell

Head-to-Head Benchmarks

The two cards in this comparison occupy entirely different corners of the GPU landscape, and the benchmark data reflects that divide. The AMD Radeon R7 350 is a legacy entry-level part from the GCN 1.0 era, while the NVIDIA RTX PRO 5000 72 GB Blackwell is a current-generation workstation-class accelerator built on the Blackwell 2.0 architecture. Direct head-to-head benchmark comparisons are sparse in the database, but the available scores and the surrounding field of rivals make the performance gap unmistakable.

Starting with the R7 350, its recorded average benchmark score is 7,425. In the Geekbench OpenCL test, it scores 7,792, and in Geekbench Vulkan, it scores 7,057. These are modest figures, placing the card at the 40th percentile among all GPUs in the database. Its nearest rivals include the Intel UHD Graphics 750 (average score 7,441, a delta of -0.2%), the AMD Radeon HD 8850M (7,447, -0.3%), the NVIDIA GeForce GTX 1650 (7,472, -0.6%), and the Intel Arc A310 (7,550, -1.7%). The data shows the R7 350 sits right in the middle of a cluster of older and lower-end parts, with performance that is essentially within a rounding error of integrated graphics solutions and early discrete cards.

The RTX PRO 5000 72 GB tells a completely different story in raw capability, but the database's average benchmark score tells a surprisingly nuanced one. The card's average benchmark score is 6,407, which is actually lower than the R7 350's 7,425. However, this figure is heavily skewed by the specific test suite recorded for the RTX PRO 5000. The database includes PassMark scores for DirectX 9 (311), DirectX 10 (175), DirectX 11 (219), DirectX 12 (78), G2D (914), G3D (24,310), and GPU compute (15,667), plus a 3DMark Steel Nomad DX12 score of 9,579.5. The legacy DirectX 9 through 12 PassMark scores are anomalously low, dragging the average down. The G3D score of 24,310 and the GPU compute score of 15,667 are the more representative figures for this card's actual capability.

The RTX PRO 5000's nearest rivals in the database are the NVIDIA GeForce GTX 460 SE (average score 6,389, delta 0.3%), the NVIDIA GeForce GTX 580M (6,389, 0.3%), the AMD Radeon Vega 10 Mobile (6,476, -1.1%), and the NVIDIA Quadro M5000M (6,481, -1.1%). This places the RTX PRO 5000 at the 37th percentile among all GPUs, which is a misleading position given the enormous hardware behind it. The discrepancy between the G3D score (24,310) and the PassMark legacy scores (78 to 311) suggests the benchmark suite is not properly exercising the Blackwell architecture's capabilities in those older DirectX APIs. The 3DMark Steel Nomad DX12 score of 9,579.5 is the most modern and relevant metric, and it aligns with a high-end workstation card.

Looking at the biggest wins each way: the R7 350 wins on average benchmark score by 1,018 points (7,425 versus 6,407). But the RTX PRO 5000 wins decisively on the modern workload tests. In PassMark G3D, it scores 24,310 against the R7 350's absence of any comparable submitted test. In PassMark GPU compute, the RTX PRO 5000 scores 15,667. The R7 350 has no compute-specific score in the database beyond its Geekbench OpenCL result of 7,792, which is less than half the RTX PRO 5000's compute figure. The 3DMark Steel Nomad DX12 score of 9,579.5 further underscores the RTX PRO 5000's dominance in contemporary rendering workloads, a test category where the R7 350 has no recorded entry.

Where Each One Wins

The R7 350's wins are limited to the aggregate score and the Geekbench OpenCL and Vulkan tests. In Geekbench OpenCL, the R7 350 hits 7,792, and in Vulkan, 7,057. These are the only two benchmarks the database lists for this card, and they are the only places where it posts a score higher than the RTX PRO 5000's average. This makes sense for a card of its era: the R7 350 was built for basic 2D and 3D acceleration, light gaming at low resolutions, and legacy API workloads. The GCN 1.0 architecture, with 512 shading units, 32 TMUs, and 16 ROPs, was designed to handle DirectX 11-era titles and simple compute tasks. Its 2 GB of GDDR5 memory on a 128-bit bus with 72.00 GB/s bandwidth is sufficient for those older workloads but is a hard ceiling for anything modern.

The RTX PRO 5000 72 GB wins in every meaningful modern workload category. The PassMark G3D score of 24,310 is more than three times the R7 350's entire average benchmark score. The PassMark GPU compute score of 15,667 dwarfs the R7 350's OpenCL result. The 3DMark Steel Nomad DX12 score of 9,579.5 represents a current-generation DirectX 12 benchmark, which the R7 350 cannot even attempt to run meaningfully given its DirectX 12 (11_1) API support. The RTX PRO 5000 also has the hardware to back these scores: 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores. For professional rendering, AI inference, and simulation workloads, the RTX PRO 5000 is in a different league entirely.

The use-case split is clean. The R7 350 is for legacy systems, basic office graphics, and very old games. The RTX PRO 5000 is for professional 3D rendering, scientific compute, and any workload that can leverage its 72 GB of GDDR7 memory and 1.34 TB/s of bandwidth. The data shows no scenario where the R7 350 competes in the RTX PRO 5000's intended market, and the RTX PRO 5000's poor showing in legacy PassMark tests is a quirk of the benchmark suite, not a reflection of its real-world capability.

Architecture Differences

The two GPUs are separated by nearly a decade of architectural evolution. The R7 350 uses the Cape Verde chip, built on GCN 1.0 architecture, which AMD introduced with the Radeon HD 7000 series. The process node is 28 nm, fabricated by TSMC, with 1,500 million transistors on a 123 mm² die. The transistor density is 12.2M per mm². GCN 1.0 was a compute-oriented design that balanced shading units and texture units for the games of its time. It has no RT cores and no tensor cores, as those concepts did not exist in consumer hardware in 2016. The card supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. The memory subsystem is 2 GB of GDDR5 on a 128-bit bus, delivering 72.00 GB/s. The R7 350 has a 55 W TDP, requires no power connectors, and is a single-slot card. Its production status is end-of-life, and it was released in July 2016.

The RTX PRO 5000 uses the GB202 chip, built on Blackwell 2.0 architecture, NVIDIA's latest professional GPU design. The process node is 5 nm, also fabricated by TSMC, with 92,200 million transistors on a 750 mm² die. That is a transistor density of 122.9M per mm², roughly ten times that of the R7 350. Blackwell 2.0 brings dedicated RT cores (110 of them) and tensor cores (440 of them), which enable hardware-accelerated ray tracing and AI processing. The memory subsystem is 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s of bandwidth. The card has a 300 W TDP, requires a single 16-pin power connector, and is a dual-slot design. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. The RTX PRO 5000 was released in October 2025 and is still in active production.

The architectural gulf is stark. The RTX PRO 5000 has 27.5 times the shading units (14,080 versus 512), 13.75 times the TMUs (440 versus 32), and 10 times the ROPs (160 versus 16). The pixel rate is 380.3 GPixel/s versus 12.80 GPixel/s, a 29.7x difference. The texture rate is 1,045.9 GTexel/s versus 25.60 GTexel/s, a 40.9x difference. The FP32 compute is 66.94 TFLOPS versus 819.2 GFLOPS, an 81.7x difference. The RTX PRO 5000 also supports FP16 at a 1:1 ratio (66.94 TFLOPS), while the R7 350 has no recorded FP16 capability.

Specification Differences

The specification tables for these two cards differ on nearly every field. The R7 350 has a memory clock of 1125 MHz (4.5 Gbps effective), while the RTX PRO 5000 has a base clock of 1740 MHz and a boost clock of 2377 MHz, with memory at 1750 MHz (28 Gbps effective). The R7 350's memory size is 2 GB, type GDDR5, on a 128-bit bus, with 72.00 GB/s bandwidth. The RTX PRO 5000's memory is 72 GB, type GDDR7, on a 384-bit bus, with 1.34 TB/s bandwidth. The R7 350 has no base or boost clock listed, no RT cores, no tensor cores, and no FP16 rating. The RTX PRO 5000 has all of those fields populated.

The bus interface differs: PCIe 3.0 x16 for the R7 350 versus PCIe 5.0 x16 for the RTX PRO 5000. The display outputs are 1x DVI, 1x HDMI 1.4a, and 1x DisplayPort 1.2 for the R7 350, versus 4x DisplayPort 2.1b for the RTX PRO 5000. The power profile is dramatically different: the R7 350 has a 55 W TDP with no power connectors and a suggested PSU of 250 W, while the RTX PRO 5000 has a 300 W TDP with a 1x 16-pin connector and a suggested PSU of 700 W. The physical dimensions also differ: the R7 350 is 168 mm (6.6 inches) long and single-slot, while the RTX PRO 5000 is 267 mm (10.5 inches) long, 111 mm (4.4 inches) high, 40 mm (1.6 inches) wide, and dual-slot. The R7 350 has no recorded height or width dimensions.

The production status is end-of-life for the R7 350 and active for the RTX PRO 5000. The release dates are July 2016 and October 2025, respectively. The predecessor and successor fields also differ: the R7 350's predecessor is Volcanic Islands and its successor is Arctic Islands, while the RTX PRO 5000's predecessor is Workstation Ada and it has no recorded successor. Both cards have no launch MSRP in the database.

FAQ

Q: Which card has a higher average benchmark score?

A: The AMD Radeon R7 350 has a higher average benchmark score of 7,425, compared to the NVIDIA RTX PRO 5000 72 GB's 6,407. However, the RTX PRO 5000's average is skewed by anomalously low legacy PassMark DirectX scores (ranging from 78 to 311), while its PassMark G3D score is 24,310.

Q: How do the FP32 compute capabilities compare?

A: The RTX PRO 5000 delivers 66.94 TFLOPS of FP32 performance, while the R7 350 delivers 819.2 GFLOPS. The RTX PRO 5000 is approximately 81.7 times faster in raw FP32 throughput.

Q: What memory configurations do these cards use?

A: The R7 350 has 2 GB of GDDR5 on a 128-bit bus with 72.00 GB/s bandwidth. The RTX PRO 5000 has 72 GB of GDDR7 on a 384-bit bus with 1.34 TB/s bandwidth.

Q: Do these cards support the same DirectX versions?

A: No. The R7 350 supports DirectX 12 (11_1), which is a feature-limited implementation. The RTX PRO 5000 supports DirectX 12 Ultimate (12_2), which includes full ray tracing and mesh shader support.

Q: Which card has more shading units?

A: The RTX PRO 5000 has 14,080 shading units, while the R7 350 has 512. The RTX PRO 5000 also has 110 RT cores and 440 tensor cores, which the R7 350 lacks entirely.

Q: What are the power requirements for each card?

A: The R7 350 has a 55 W TDP, requires no power connectors, and suggests a 250 W PSU. The RTX PRO 5000 has a 300 W TDP, requires a single 16-pin power connector, and suggests a 700 W PSU.

DETAILED SPECIFICATIONS

SPECIFICATION
R7 350
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
512
14,080 +2650.0%
Shaders
512
14,080 +2650.0%
TMUs
32
440 +1275.0%
ROPs
16
160 +900.0%
Compute Units
8
—
SM Count
—
110
Clocks
Base Clock
—
1740 MHz
Boost Clock
—
2377 MHz
GPU Clock
800 MHz
—
Memory Clock
1125 MHz 4.5 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
2 GB
72 GB
VRAM (MB)
2,048
73,728 +3500.0%
Memory Type
GDDR5
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
72.00 GB/s
1.34 TB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
256 KB
96 MB
Performance
Pixel Rate
12.80 GPixel/s
380.3 GPixel/s
Texture Rate
25.60 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
819.2 GFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
51.20 GFLOPS (1:16)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
—
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
55 W
300 W
TDP (W)
55
300 +445.5%
Suggested PSU
250 W
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
GCN 1.0
Blackwell 2.0
GPU Name
Cape Verde
GB202
Generation
Pirate Islands (R7 300)
Blackwell PRO W (x000)
Process Size
28 nm
5 nm
Transistors
1,500 million
92,200 million
Die Size
123 mm²
750 mm²
Foundry
TSMC
TSMC
Density
12.2M / mm²
122.9M / mm²
API Support
DirectX
12 (11_1)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.4
OpenCL
2.1 (1.2)
3.0
CUDA
—
12.0
Shader Model
6.5 (5.1)
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
168 mm 6.6 inches
267 mm 10.5 inches
Height
—
111 mm 4.4 inches
Outputs
1x DVI1x HDMI 1.4a1x DisplayPort 1.2
4x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x16
PCIe 5.0 x16
Other
Production
End-of-life
Active
Predecessor
Volcanic Islands
Workstation Ada
Successor
Arctic Islands
—
View Radeon R7 350 Details View RTX PRO 5000 72 GB Blackwell Details