AMD Radeon R6 M255DX vs NVIDIA GeForce GTX 1050 Ti Comparison
AMD Radeon R6 M255DX
GeForce GTX 1050 Ti
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R6 M255DX vs NVIDIA GeForce GTX 1050 Ti
Head-to-Head Benchmarks
The single shared benchmark between these two GPUs is Geekbench Vulkan, and the result is decisive. The NVIDIA GeForce GTX 1050 Ti scores 10001 points, while the AMD Radeon R6 M255DX scores 4867 points, a delta of 51.3% in favor of the NVIDIA part. This is not a marginal difference; the GTX 1050 Ti more than doubles the AMD chip's score. In practical terms, the data indicates the NVIDIA GPU delivers a substantially higher level of Vulkan API performance, making it the stronger choice for any workload that relies on that interface.
The AMD Radeon R6 M255DX sits in a peculiar position in the database. Its average benchmark score is 4867, which is actually higher than its Geekbench Vulkan score alone, because that Vulkan result is the only recorded benchmark for the chip. This places it at the 28th percentile among all GPUs tracked. The GTX 1050 Ti, by contrast, has a much wider benchmark footprint with 11 recorded tests, and its average score of 4193 is lower than its Vulkan score. That average pulls in results from older DirectX and compute tests, some of which are far less favorable than the Vulkan number. The GTX 1050 Ti sits at the 25th percentile overall, which is lower than the AMD part's percentile, but this is misleading: the GTX 1050 Ti has a much richer data set, and its Vulkan score towers over the R6 M255DX.
Looking at the nearest rivals for each card puts the performance gap in context. The AMD Radeon R6 M255DX is bracketed by the NVIDIA GeForce GTX 560M (4855, which is 0.2% behind) and the NVIDIA GeForce GTS 450 (4893, which is 0.5% ahead). These are all older, low-end parts, and the delta percentages are tiny, meaning the R6 M255DX is effectively in the same performance class as those GPUs. The database even lists the NVIDIA GeForce RTX 5060 Ti 8 GB as a nearest rival with a score of 4901, only 0.7% ahead of the AMD chip, which shows how tightly clustered this performance tier is. The NVIDIA GeForce 940MX (4844, 0.5% behind) rounds out the group. The AMD part is not a standout; it is firmly in the middle of a very narrow band of low-to-mid-range GPUs.
The GTX 1050 Ti's nearest rivals tell a different story. The AMD Radeon R5 M330 (4170, 0.6% behind), the NVIDIA Quadro K2100M (4151, 1% behind), the NVIDIA Quadro K3000M (4241, 1.1% ahead), and the AMD Radeon Vega 3 (4268, 1.8% ahead) all cluster around the GTX 1050 Ti's average of 4193. This average, however, is dragged down by weak legacy benchmark scores: PassMark DirectX 9 at 104, PassMark DirectX 11 at 45, and PassMark DirectX 10 at 31. The GTX 1050 Ti's PassMark G3D score of 6340 is far more representative of its real-world gaming capability, and its Geekbench OpenCL score of 18129 shows strong compute performance. The R6 M255DX has no comparable data in these tests, so the only apples-to-apples comparison is Vulkan, and there the GTX 1050 Ti wins by a wide margin.
Architecture Differences
The two GPUs come from different eras and different design philosophies. The AMD Radeon R6 M255DX uses the Jet chip built on GCN 1.0 architecture, manufactured on a 28 nm process at TSMC. The NVIDIA GeForce GTX 1050 Ti uses the GP107 chip on Pascal architecture, built on a 14 nm process at Samsung. The process node difference is significant: 28 nm versus 14 nm, which directly affects transistor density. The AMD chip packs 690 million transistors into a 56 mm² die, for a density of 12.3M transistors per mm². The NVIDIA chip crams 3,300 million transistors into 132 mm², a density of 25.0M per mm². That is roughly double the density, and it shows in the performance gap.
The memory subsystems are fundamentally different. The AMD Radeon R6 M255DX uses system shared memory, with size, type, bus width, and bandwidth all listed as "System Shared" or "System Dependent." This is an integrated graphics processor (IGP) with no dedicated VRAM; it borrows from the system's main memory, and its bandwidth depends entirely on the host platform. The GTX 1050 Ti, by contrast, has 4 GB of dedicated GDDR5 memory on a 128-bit bus, delivering 112.1 GB/s of bandwidth. That dedicated memory with a fixed bandwidth is a massive advantage for texture-heavy workloads and high-resolution rendering.
The compute resources differ sharply. The AMD chip has 320 shading units, 20 texture mapping units, and 8 raster output units. The NVIDIA chip has 768 shading units, 48 TMUs, and 32 ROPs. That is 2.4 times the shading units, 2.4 times the TMUs, and 4 times the ROPs. These raw resource counts translate directly into the pixel and texture rates: the AMD chip produces 6.840 GPixel/s and 17.10 GTexel/s, while the NVIDIA chip produces 44.54 GPixel/s and 66.82 GTexel/s. The NVIDIA part is roughly 6.5 times faster in pixel throughput and nearly 4 times faster in texture throughput.
Clock speeds also favor the NVIDIA card. The AMD Radeon R6 M255DX runs at a base of 780 MHz and boosts to 855 MHz. The GTX 1050 Ti runs at 1291 MHz base and 1392 MHz boost. Higher clocks, more cores, and more memory bandwidth compound into a large overall advantage. The floating-point throughput tells the story: the AMD chip delivers 547.2 GFLOPS of FP32, while the NVIDIA chip delivers 2.138 TFLOPS, nearly four times more. The NVIDIA card also supports FP16 at 33.41 GFLOPS (with a 1:64 ratio), while the AMD chip has no recorded FP16 capability.
API support shows a generational split. The AMD Radeon R6 M255DX supports DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. The GTX 1050 Ti supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. The DirectX 12 feature level difference, 11_1 versus 12_1, matters for modern titles that use advanced DX12 features. The Vulkan version gap, 1.2.170 versus 1.4, also indicates newer API feature support on the NVIDIA side. Neither card has ray tracing or tensor cores, as those are absent from both entries.
FAQ
Q: Which GPU is faster in Vulkan workloads?
A: The NVIDIA GeForce GTX 1050 Ti scores 10001 in Geekbench Vulkan, while the AMD Radeon R6 M255DX scores 4867, making the NVIDIA card 51.3% faster in this test.
Q: Does the AMD Radeon R6 M255DX have dedicated video memory?
A: No. The AMD chip uses system shared memory for all memory parameters, including size, type, bus width, and bandwidth. Its memory bandwidth is listed as "System Dependent," meaning it varies with the host system.
Q: What is the memory configuration of the GTX 1050 Ti?
A: The GTX 1050 Ti has 4 GB of GDDR5 memory on a 128-bit bus, delivering 112.1 GB/s of bandwidth.
Q: How do the shading unit counts compare?
A: The AMD Radeon R6 M255DX has 320 shading units, while the NVIDIA GeForce GTX 1050 Ti has 768 shading units, 2.4 times more.
Q: Which GPU has better DirectX 12 support?
A: The GTX 1050 Ti supports DirectX 12 (12_1), while the Radeon R6 M255DX supports DirectX 12 (11_1). The higher feature level on the NVIDIA card indicates better support for advanced DX12 functionality.
Q: What is the transistor density difference?
A: The AMD chip has a density of 12.3M transistors per mm² on a 28 nm process, while the NVIDIA chip has 25.0M transistors per mm² on a 14 nm process, roughly double the density.
Specification Differences
| Specification | AMD Radeon R6 M255DX | NVIDIA GeForce GTX 1050 Ti |
|---|---|---|
| Architecture | GCN 1.0 | Pascal |
| Process Node | 28 nm | 14 nm |
| Foundry | TSMC | Samsung |
| Transistors | 690 million | 3,300 million |
| Die Size | 56 mm² | 132 mm² |
| Transistor Density | 12.3M / mm² | 25.0M / mm² |
| Base Clock | 780 MHz | 1291 MHz |
| Boost Clock | 855 MHz | 1392 MHz |
| Memory Size | System Shared | 4 GB |
| Memory Type | System Shared | GDDR5 |
| Memory Bus Width | System Shared | 128 bit |
| Memory Bandwidth | System Dependent | 112.1 GB/s |
| Shading Units | 320 | 768 |
| TMUs | 20 | 48 |
| ROPs | 8 | 32 |
| Pixel Rate | 6.840 GPixel/s | 44.54 GPixel/s |
| Texture Rate | 17.10 GTexel/s | 66.82 GTexel/s |
| FP32 | 547.2 GFLOPS | 2.138 TFLOPS |
| FP16 | Not listed | 33.41 GFLOPS (1:64) |
| TDP | Not listed | 75 W |
| Slot Width | IGP | Dual-slot |
| Power Connectors | None listed | None |
| Suggested PSU | Not listed | 250 W |
| Bus Interface | IGP | PCIe 3.0 x16 |
| Display Outputs | Portable Device Dependent | 1x DVI, 1x HDMI 2.0, 1x DisplayPort 1.4a |
| DirectX | 12 (11_1) | 12 (12_1) |
| Vulkan | 1.2.170 | 1.4 |
| Release Date | 2014-01-06 | 2016-10-24 |
| Launch MSRP | Not listed | 139 USD |
Where Each One Wins
The NVIDIA GeForce GTX 1050 Ti wins in every measurable category. In the only shared benchmark, Geekbench Vulkan, it beats the AMD chip by 51.3%. It has more shading units, more TMUs, more ROPs, higher clocks, dedicated memory, and a much higher pixel rate and texture rate. Its FP32 throughput of 2.138 TFLOPS is nearly four times the AMD chip's 547.2 GFLOPS. The GTX 1050 Ti is also a discrete card with PCIe 3.0 x16 interface and its own display outputs, while the AMD Radeon R6 M255DX is an integrated processor with no dedicated memory and display output dependent on the portable device.
The AMD Radeon R6 M255DX does have one advantage in the recorded data: its percentile ranking. It sits at the 28th percentile among all GPUs, while the GTX 1050 Ti sits at the 25th percentile. This is because the AMD chip's average score is based on a single strong Vulkan result, while the GTX 1050 Ti's average is pulled down by weaker legacy DirectX and compute tests. However, this is a statistical artifact of the different data sets, not a real performance advantage. In the direct head-to-head test, the AMD chip loses by a wide margin.
For use cases, the GTX 1050 Ti is the clear choice for gaming, especially modern titles that leverage DirectX 12 (12_1) features, and for compute workloads such as OpenCL, where it scores 18129 in Geekbench. Its PassMark G3D score of 6340 indicates solid 3D rendering capability. The AMD Radeon R6 M255DX, being an IGP with system shared memory, is suited only to the lightest of tasks, and its only recorded benchmark result shows it performing at a level comparable to the NVIDIA GeForce GTX 560M and GeForce 940MX, which are older low-end discrete parts.
The Verdict
The data is unambiguous. The NVIDIA GeForce GTX 1050 Ti is the superior GPU by every direct comparison available in the database. It wins the only shared benchmark by 51.3%, has nearly four times the FP32 throughput, 2.4 times the shading units, and 4 times the ROPs. It has dedicated GDDR5 memory with 112.1 GB/s of bandwidth, while the AMD chip relies on system shared memory with system-dependent bandwidth. The GTX 1050 Ti also has a newer architecture, a more advanced process node, and better API support, including DirectX 12 (12_1) and Vulkan 1.4.
The AMD Radeon R6 M255DX is an integrated GPU from 2014, built on older GCN 1.0 architecture and a 28 nm process. Its performance class, as shown by its nearest rivals, is on par with the NVIDIA GeForce GTX 560M and GeForce 940MX, both of which are significantly older than the GTX 1050 Ti. The AMD chip's higher percentile ranking is a function of its limited benchmark data, not its real-world capability.
Users should choose the GTX 1050 Ti for any task that requires actual graphics performance: gaming, 3D rendering, or GPU compute. The AMD Radeon R6 M255DX should only be considered for systems where it is the only available option, such as a laptop with no discrete GPU, and even then, expectations should be modest. The recorded data shows a GPU that is more than twice as fast in Vulkan, with better memory, more cores, and superior API support. The verdict is clear: the GTX 1050 Ti is the definitive choice between these two.