AMD Radeon R6 M255DX vs AMD Radeon R7 M265 Comparison

AMD
RADEON

AMD Radeon R6 M255DX

CORE STATE Jet
VRAM System Shared
CLOCK SPEED 855 MHz
TDP —
BUS WIDTH System Shared
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2014
VS
AMD
RADEON

Radeon R7 M265

CORE STATE Opal
VRAM 2 GB
CLOCK SPEED 825 MHz
TDP —
BUS WIDTH 128 bit
ARCHITECTURE GCN 1.0
nm
PROCESS 28 nm
LAUNCH DATE 2014

PERFORMANCE BENCHMARKS

geekbench_vulkan
4,867
N/A
geekbench_opencl
N/A
4,929

Analysis: AMD Radeon R6 M255DX vs AMD Radeon R7 M265

AMD’s Radeon R7 M265 and Radeon R6 M255DX are two end-of-life mobile graphics processors from the Gem System generation, both built on the GCN 1.0 architecture and fabricated by TSMC on a 28 nm process. The two parts, however, target different segments of the laptop market: the M265 is a discrete solution with its own dedicated video memory, while the M255DX is an integrated graphics processor (IGP) that shares system memory. Benchmark data shows they land within a hair of each other in raw compute performance, but their architectural and memory differences create distinct use-case profiles. The M265 scores 4,929 in Geekbench OpenCL, while the M255DX scores 4,867 in Geekbench Vulkan, a gap of roughly 1.3% that places them in adjacent percentile rankings (29th versus 28th among all GPUs). This review breaks down where each chip wins, what separates them internally, and which type of user should favor one over the other.

Head-to-Head Benchmarks

Direct head-to-head benchmark results are not available for these two parts, but their respective Geekbench scores provide a clear basis for comparison. The Radeon R7 M265 achieves a Geekbench OpenCL score of 4,929, while the Radeon R6 M255DX achieves a Geekbench Vulkan score of 4,867. That is a 62-point difference, which translates to the M265 leading by roughly 1.3% over the M255DX. While the tests differ (OpenCL versus Vulkan), both are compute-oriented workloads, and the margin is narrow enough that the M265's advantage is effectively marginal in real-world terms.

Looking at the nearest rival data, the M265 sits in a tight cluster of GPUs. Its closest competitor is the AMD Radeon R7 M360, which averages 4,931 points—a delta of 0%—meaning the M265 is statistically tied with that part. The M265 also edges out the AMD FirePro W5130M (4,904 points, 0.5% ahead) and the NVIDIA GeForce RTX 5060 Ti 8 GB (4,901 points, 0.6% ahead), while beating the NVIDIA GeForce GTS 450 (4,893 points) by 0.7%. The M255DX, for its part, is 0.2% ahead of the NVIDIA GeForce GTX 560M (4,855 points), 0.5% ahead of the NVIDIA GeForce 940MX (4,844 points), but trails the NVIDIA GeForce GTS 450 by 0.5% and the RTX 5060 Ti 8 GB by 0.7%. Notably, both AMD parts are within 0.7% of an RTX 5060 Ti 8 GB in this specific benchmark, which shows how narrow the compute performance band is here.

In terms of raw computational throughput, the M265 holds a clear specification advantage. It packs 384 shading units, 24 texture mapping units, and 8 ROPs, running at a base clock of 725 MHz with a boost of 825 MHz. This yields a FP32 compute rate of 633.6 GFLOPS, a texture rate of 19.80 GTexel/s, and a pixel rate of 6.600 GPixel/s. The M255DX, by contrast, has 320 shading units, 20 TMUs, and 8 ROPs, clocked higher at 780 MHz base and 855 MHz boost. Despite the higher clocks, the smaller core count results in lower throughput: 547.2 GFLOPS FP32, 17.10 GTexel/s, and 6.840 GPixel/s. The M265 leads in FP32 by 86.4 GFLOPS (15.8% more) and in texture rate by 2.70 GTexel/s (15.8% more), while the M255DX actually wins the pixel rate race by a small margin—6.840 versus 6.600 GPixel/s, a 3.6% advantage.

Where Each One Wins

The Radeon R7 M265 is the stronger compute performer across the board. Its higher shading unit count (384 versus 320) and dedicated memory subsystem give it a 15.8% advantage in both FP32 throughput and texture fill rate. This makes it the better choice for tasks that stress shader arithmetic and texture sampling, such as older DirectX 11 games, OpenGL applications, and compute workloads that can leverage OpenCL. The M265 also benefits from a 128-bit memory bus and 2 GB of dedicated DDR3 memory operating at 900 MHz, delivering 28.80 GB/s of bandwidth. That dedicated memory pool means the GPU does not compete with the CPU for system RAM, which can reduce stutter in memory-heavy scenarios.

The Radeon R6 M255DX, despite its lower absolute compute numbers, holds a few specific advantages. Its pixel rate of 6.840 GPixel/s is 3.6% higher than the M265's, which could translate to slightly better fill-rate-bound performance in certain low-resolution or simple-scene scenarios. It also runs at higher clocks—780 MHz base and 855 MHz boost versus 725 MHz and 825 MHz—which helps close the gap in workloads that are clock-sensitive rather than core-count-sensitive. Being an IGP, the M255DX is also inherently more power-efficient at the system level (no separate VRAM or bus interface), though no TDP figures are available to quantify this. For users who cannot or prefer not to have a discrete GPU, the M255DX provides a baseline of 3D capability without the added hardware overhead.

The benchmark scores themselves tell a similar story. The M265's 4,929 OpenCL score places it in the 29th percentile of all GPUs, with rivals like the R7 M360 and FirePro W5130M within 0.5%. The M255DX's 4,867 Vulkan score is in the 28th percentile, with the GTX 560M and 940MX as its nearest comparable parts. In practice, the M265 is the part to pick when every bit of compute performance matters, while the M255DX makes sense in integrated-only systems where the slightly lower throughput is acceptable.

Architecture Differences

Both GPUs are built on the same GCN 1.0 architecture, use the 28 nm process at TSMC, and share a transistor density of 12.3M per mm². They also support identical API feature sets: DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170. The core difference lies in their silicon and how the memory is handled.

The M265 uses the Opal chip, which contains 950 million transistors on a 77 mm² die. The M255DX uses the Jet chip, which is smaller and simpler, with 690 million transistors on a 56 mm² die. That 260-million-transistor difference explains the M265's extra 64 shading units and 4 extra TMUs. The M265 also has a dedicated memory interface: a 128-bit bus connecting to 2 GB of DDR3 at 900 MHz, yielding 28.80 GB/s of bandwidth. The M255DX, in contrast, has no dedicated VRAM—its memory size, type, bus width, and bandwidth are all listed as "System Shared" or "System Dependent," meaning it relies entirely on the host laptop's RAM. This is the defining architectural split: a discrete part with a fixed memory pipeline versus an IGP that borrows bandwidth from the system.

The M265 is a PCIe 3.0 x8 card, while the M255DX is an IGP with no bus interface beyond the motherboard's integrated path. The M255DX's display outputs are "Portable Device Dependent," which is standard for integrated graphics in laptops, while the M265's display outputs are not specified in the data. Both parts are end-of-life, but the M265 has a known predecessor (Solar System) and successor (Polaris Mobile) in the product lineage, whereas the M255DX lists neither. The M265 uses a discrete GPU package, while the M255DX is explicitly listed with a slot width of "IGP," confirming its integrated nature.

Release dates are also close: the M255DX launched on January 6, 2014, and the M265 on January 8, 2014—two days apart. Neither part carries a launch MSRP, so no pricing data is available for comparison.

The Verdict

The data presents a clear hierarchy: the Radeon R7 M265 is the faster GPU, but only by a narrow margin. Its 4,929 OpenCL score versus the M255DX's 4,867 Vulkan score is a 1.3% difference, and that edge comes primarily from the M265's larger core configuration—384 shading units versus 320—and its dedicated 2 GB DDR3 memory on a 128-bit bus. The M265 also outperforms the M255DX in FP32 compute (633.6 versus 547.2 GFLOPS) and texture rate (19.80 versus 17.10 GTexel/s). For any workload that is shader-bound or texture-bound, the M265 is the safer choice.

The M255DX, however, is not without merit. Its higher boost clock (855 MHz versus 825 MHz) and marginally better pixel rate (6.840 versus 6.600 GPixel/s) mean it is not completely outclassed. In fill-rate-limited scenarios, it can hold its own. More importantly, the M255DX is an IGP, which makes it the only option in systems that lack a discrete GPU slot. For a laptop buyer who cannot upgrade or configure a discrete part, the M255DX is the functional baseline.

Users should decide based on system form factor and workload. Pick the R7 M265 if you have a laptop with a PCIe 3.0 x8 slot and want the best possible compute performance from a mobile AMD part in this generation—particularly for OpenCL-heavy applications or games that respond to higher shader counts. Pick the R6 M255DX if you are constrained to integrated graphics and need a part that handles basic 3D, DirectX 12 (11_1), and Vulkan workloads without the overhead of a discrete memory pipeline. The M265 is the winner on paper, but the M255DX is the only one of the two that exists in an integrated-only world.

FAQ

Q: Which GPU is faster in Geekbench benchmarks?

A: The AMD Radeon R7 M265 scores 4,929 in Geekbench OpenCL, while the AMD Radeon R6 M255DX scores 4,867 in Geekbench Vulkan. The M265 leads by 62 points, approximately 1.3%.

Q: Do these GPUs support modern graphics APIs?

A: Yes, both support DirectX 12 (11_1), OpenGL 4.6, and Vulkan 1.2.170, as listed in their API specifications.

Q: How do they compare in terms of memory configuration?

A: The R7 M265 has 2 GB of dedicated DDR3 memory on a 128-bit bus, providing 28.80 GB/s of bandwidth. The R6 M255DX uses system-shared memory, with its bandwidth listed as "System Dependent."

Q: What are the core counts and clock speeds?

A: The M265 has 384 shading units, 24 TMUs, and 8 ROPs, with a base clock of 725 MHz and boost of 825 MHz. The M255DX has 320 shading units, 20 TMUs, and 8 ROPs, with a base clock of 780 MHz and boost of 855 MHz.

Q: Are these GPUs still in production?

A: No, both are end-of-life products. The R7 M265 was released on January 8, 2014, and the R6 M255DX on January 6, 2014.

Q: Which GPU is better for compute workloads like FP32?

A: The R7 M265 is superior, delivering 633.6 GFLOPS FP32 compared to the M255DX's 547.2 GFLOPS, a 15.8% advantage.

DETAILED SPECIFICATIONS

SPECIFICATION
R6 M255DX
R7 M265
Core Specs
Shading Units
320
384 +20.0%
Shaders
320
384 +20.0%
TMUs
20
24 +20.0%
ROPs
8
8 0.0%
Compute Units
5
6 +20.0%
Clocks
Base Clock
780 MHz
725 MHz
Boost Clock
855 MHz
825 MHz
Memory Clock
System Shared
900 MHz 1800 Mbps effective
Memory
Memory Size
System Shared
2 GB
VRAM (MB)
—
2,048
Memory Type
System Shared
DDR3
Memory Bus
System Shared
128 bit
Bandwidth
System Dependent
28.80 GB/s
Cache
L1 Cache
16 KB (per CU)
16 KB (per CU)
L2 Cache
128 KB
256 KB
Performance
Pixel Rate
6.840 GPixel/s
6.600 GPixel/s
Texture Rate
17.10 GTexel/s
19.80 GTexel/s
FP32 (TFLOPS)
547.2 GFLOPS
633.6 GFLOPS
FP64 (TFLOPS)
34.20 GFLOPS (1:16)
—
Architecture
Architecture
GCN 1.0
GCN 1.0
GPU Name
Jet
Opal
Generation
Gem System Hybrid (Rx M200)
Gem System (R7 M200)
Process Size
28 nm
28 nm
Transistors
690 million
950 million
Die Size
56 mm²
77 mm²
Foundry
TSMC
TSMC
Density
12.3M / mm²
12.3M / mm²
API Support
DirectX
12 (11_1)
12 (11_1)
OpenGL
4.6
4.6
Vulkan
1.2.170
1.2.170
OpenCL
2.1 (1.2)
2.1 (1.2)
Shader Model
6.5 (5.1)
6.5 (5.1)
Physical
Slot Width
IGP
—
Outputs
Portable Device Dependent
—
Bus Interface
IGP
PCIe 3.0 x8
Other
Production
End-of-life
End-of-life
Predecessor
—
Solar System
Successor
—
Polaris Mobile
View Radeon R6 M255DX Details View Radeon R7 M265 Details