AMD Radeon R5 M435 vs NVIDIA RTX PRO 6000 Blackwell Server Comparison
AMD Radeon R5 M435
RTX PRO 6000 Blackwell Server
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon R5 M435 vs NVIDIA RTX PRO 6000 Blackwell Server
# Head-to-Head Benchmarks
The benchmark data shows a tightly contested comparison, but the two cards achieve their scores in entirely different tests. The NVIDIA RTX PRO 6000 Blackwell Server posts a 3DMark Steel Nomad DX12 score of 5,996, while the AMD Radeon R5 M435 delivers a Geekbench OpenCL score of 5,859. These are not directly comparable workloads, which makes a raw score-to-score verdict misleading. What matters is the context each score sits in.
The RTX PRO 6000 lands at the 34th percentile of all GPUs, which places it just 0.1% behind the NVIDIA GeForce GTX 770M (6,000) and 0.1% behind the AMD Radeon RX 6400 (6,001). It also sits 0.2% ahead of the AMD FirePro W4100 (5,987) and 0.2% ahead of the NVIDIA Quadro K4000M (5,986). The data suggests this is a mid-pack performer in the 3DMark Steel Nomad workload, with no single rival holding a decisive edge. The tightest margin is the 0.1% gap to both the GTX 770M and RX 6400, which is effectively a statistical tie.
The R5 M435, by contrast, sits at the 33rd percentile of all GPUs in its Geekbench OpenCL test. It trails the Intel UHD Graphics 730 (5,929) by 1.2% and the AMD Radeon HD 8730M (5,955) by 1.6%, while leading the NVIDIA Quadro K620M (5,957) by 1.6%. Its nearest rival is the AMD Radeon R7 M465 (5,841), which it beats by 0.3%. The pattern here is similar: the R5 M435 is clustered within a narrow band of low-end and integrated graphics, with the largest margin being a 1.6% advantage over the Quadro K620M.
Neither card wins decisively in raw head-to-head comparisons because they compete in different benchmark suites. However, the data shows the RTX PRO 6000 holds a slight percentile advantage (34 vs 33), and its closest rivals are within 0.2% on either side. The R5 M435 faces a wider spread of competitors, with its nearest rival being 0.3% ahead and others trailing by up to 1.6%. If forced to pick a winner from the numbers alone, the RTX PRO 6000 edges out the R5 M435 by a single percentile point, but the margin is too small to call it a meaningful performance victory.
Architecture Differences
The architectural gap between these two GPUs is enormous, reflecting nearly a decade of silicon evolution. The RTX PRO 6000 uses the GB202 chip on NVIDIA's Blackwell 2.0 architecture, built on a 5 nm process at TSMC. It packs 92,200 million transistors into a 750 mm² die, yielding a transistor density of 122.9 million per square millimeter. The R5 M435 uses the Jet chip on AMD's GCN 1.0 architecture, fabricated on a 28 nm process at the same foundry. Its transistor count is 690 million on a 56 mm² die, with a density of 12.3 million per square millimeter. That means the RTX PRO 6000 has over 133 times more transistors and a density roughly 10 times higher.
The memory subsystems are equally divergent. The RTX PRO 6000 features 96 GB of GDDR7 across a 512-bit bus, delivering 1.79 TB/s of bandwidth. The R5 M435 has 2 GB of GDDR5 on a 64-bit bus, yielding 36.00 GB/s. That is a 49.7x difference in memory capacity and a 49.7x difference in bandwidth — both staggering figures that translate into vastly different workloads.
Compute resources follow the same trajectory. The RTX PRO 6000 has 24,064 shading units, 752 TMUs, 192 ROPs, 188 RT cores, and 752 tensor cores. Its pixel rate is 502.5 GPixel/s, texture rate is 1,968.0 GTexel/s, and FP32 throughput is 126.0 TFLOPS. FP16 is also 126.0 TFLOPS at a 1:1 ratio. The R5 M435 has 320 shading units, 20 TMUs, and 8 ROPs, with no RT or tensor cores. Its pixel rate is 8.24 GPixel/s, texture rate is 20.60 GTexel/s, and FP32 is 659.2 GFLOPS. The RTX PRO 6000 delivers roughly 191x the FP32 throughput, 61x the pixel fill rate, and 95x the texture fill rate.
The RTX PRO 6000 also carries features the R5 M435 lacks entirely: dedicated ray tracing cores and tensor cores. It supports DirectX 12 Ultimate (12_2), Vulkan 1.4, and OpenGL 4.6, while the R5 M435 tops out at DirectX 12 (11_1), Vulkan 1.2.170, and OpenGL 4.6. The RTX PRO 6000 uses a PCIe 5.0 x16 interface, while the R5 M435 uses PCIe 3.0 x8. The RTX PRO 6000 is a dual-slot, 600 W card with a 16-pin power connector and requires a 1,000 W power supply, while the R5 M435 is an IGP with no power connector or PSU recommendation listed. It draws power from the system and relies on portable-device-dependent display outputs; the RTX PRO 6000 offers four DisplayPort 2.1b outputs.
FAQ
Q: Which card has better ray tracing support?
A: The RTX PRO 6000 has 188 dedicated RT cores and supports DirectX 12 Ultimate (12_2), which includes ray tracing features. The R5 M435 has no RT cores and only supports DirectX 12 (11_1), so it lacks hardware-accelerated ray tracing entirely.
Q: How do the memory bandwidth figures compare?
A: The RTX PRO 6000 delivers 1.79 TB/s over a 512-bit GDDR7 interface, while the R5 M435 provides 36.00 GB/s over a 64-bit GDDR5 bus. The RTX PRO 6000 offers roughly 50 times more bandwidth.
Q: What is the production status of each card?
A: The RTX PRO 6000 is listed as "Active" in production, with a release date of March 2025. The R5 M435 is marked "End-of-life" and was released in May 2016.
Q: Are these cards comparable for modern gaming workloads?
A: The RTX PRO 6000 is designed for server use, with FP32 and FP16 both rated at 126.0 TFLOPS and support for DirectX 12 Ultimate. The R5 M435 is an integrated mobile GPU with 659.2 GFLOPS FP32 and no tensor or RT cores. The data suggests they target entirely different performance classes.
Q: Which card has a higher transistor density?
A: The RTX PRO 6000 has a density of 122.9 million transistors per square millimeter on a 5 nm process, while the R5 M435 has 12.3 million per square millimeter on 28 nm. That is a 10x difference in density.
Q: What is the power requirement for the RTX PRO 6000?
A: The RTX PRO 6000 has a TDP of 600 W, uses a single 16-pin power connector, and requires a 1,000 W power supply. The R5 M435 has no listed TDP, power connector, or PSU recommendation because it is an IGP.
Specification Differences
The two cards differ in nearly every measurable specification. The process node is 5 nm for the RTX PRO 6000 versus 28 nm for the R5 M435. Transistor count is 92,200 million versus 690 million, and die size is 750 mm² versus 56 mm². Base clock is 1,590 MHz versus 780 MHz; boost clock is 2,617 MHz versus 1,030 MHz. Memory clock is 1,750 MHz (28 Gbps effective) versus 1,125 MHz (4.5 Gbps effective). Memory size is 96 GB versus 2 GB, type is GDDR7 versus GDDR5, bus width is 512-bit versus 64-bit, and bandwidth is 1.79 TB/s versus 36.00 GB/s.
Shading units are 24,064 versus 320, TMUs are 752 versus 20, and ROPs are 192 versus 8. The RTX PRO 6000 has 188 RT cores and 752 tensor cores; the R5 M435 has neither. Pixel rate is 502.5 GPixel/s versus 8.24 GPixel/s, texture rate is 1,968.0 GTexel/s versus 20.60 GTexel/s, and FP32 is 126.0 TFLOPS versus 659.2 GFLOPS. FP16 is 126.0 TFLOPS on the RTX PRO 6000; the R5 M435 has no listed FP16 figure.
The TDP is 600 W versus none listed. Slot width is dual-slot versus IGP. Power connectors are 1x 16-pin versus none. Suggested PSU is 1,000 W versus none. Bus interface is PCIe 5.0 x16 versus PCIe 3.0 x8. Display outputs are 4x DisplayPort 2.1b versus portable-device-dependent. DirectX support is 12 Ultimate (12_2) versus 12 (11_1); Vulkan is 1.4 versus 1.2.170; OpenGL is 4.6 for both. The RTX PRO 6000 measures 267 mm in length, 111 mm in height, and 40 mm in width; the R5 M435 has no listed dimensions. Production status is Active versus End-of-life. Release dates are March 2025 versus May 2016.
The Verdict
The data paints a clear picture: the RTX PRO 6000 Blackwell Server is a modern, high-end server GPU, while the R5 M435 is a legacy, low-end integrated mobile part. The RTX PRO 6000 wins on every architectural metric — process node, transistor count, memory capacity and bandwidth, compute throughput, feature set, and API support. Its 34th percentile ranking in 3DMark Steel Nomad places it among a cluster of mid-range desktop and mobile GPUs, but its raw specifications are in a different league from the R5 M435.
The R5 M435, at the 33rd percentile in Geekbench OpenCL, is competitive only within its own class of low-power integrated graphics. Its 0.3% lead over the R7 M465 and 1.6% lead over the Quadro K620M show it holds its own against similar-era parts, but it cannot compete with the RTX PRO 6000 on any level. The RTX PRO 6000 is rated for 600 W and requires a 1,000 W PSU; the R5 M435 is an IGP with no external power. One is a server workhorse, the other a laptop filler.
For buyers, the choice is not about which is better — it is about which workload matches the hardware. The RTX PRO 6000 is for compute-heavy server tasks, AI inference, and high-end rendering where its 96 GB of GDDR7 and 126.0 TFLOPS FP32 matter. The R5 M435 is for basic display output and light GPU acceleration in portable devices. No benchmark in the data suggests they overlap in use cases.
Where Each One Wins
The RTX PRO 6000 wins in every scenario that demands raw compute. Its 126.0 TFLOPS FP32 and FP16 throughput, 188 RT cores, and 752 tensor cores make it suitable for ray-traced rendering, machine learning inference, and scientific simulation. The 96 GB of GDDR7 memory at 1.79 TB/s allows it to hold massive datasets in memory without spilling to system RAM. The dual-slot, 600 W design and PCIe 5.0 x16 interface indicate it is built for a server chassis with ample power and cooling.
The R5 M435 wins only in efficiency and portability. As an IGP with no listed TDP or power connector, it consumes minimal power and fits into thin-and-light laptops. Its 2 GB of GDDR5 memory is sufficient for basic desktop compositing and legacy GPU-accelerated applications. It supports DirectX 12 (11_1) and Vulkan 1.2.170, which covers older games and productivity software. The 36.00 GB/s bandwidth is low, but for a 64-bit bus, it is adequate for the 320 shading units it feeds.
The benchmark percentiles reinforce this split. The RTX PRO 6000's 34th percentile in 3DMark Steel Nomad suggests it performs in the middle of the pack for modern DX12 gaming workloads, which is unexpected for a server card but consistent with its 5,996 score. The R5 M435's 33rd percentile in Geekbench OpenCL shows it sits at the bottom of the performance curve, with only 5,859 points. Neither card is a leader in its respective benchmark, but the RTX PRO 6000's hardware is clearly designed for tasks that the 3DMark test does not fully capture. The R5 M435, by contrast, has no such untapped potential — its specifications cap it at entry-level performance.