AMD Radeon Pro WX 4100 vs NVIDIA RTX PRO 5000 72 GB Blackwell Comparison

AMD
RADEON

AMD Radeon Pro WX 4100

CORE STATE Baffin
VRAM 4 GB
CLOCK SPEED 1201 MHz
TDP 50 W
BUS WIDTH 128 bit
ARCHITECTURE GCN 4.0
nm
PROCESS 14 nm
LAUNCH DATE 2016
VS
NVIDIA
GEFORCE

RTX PRO 5000 72 GB Blackwell

CORE STATE GB202
VRAM 72 GB
CLOCK SPEED 2377 MHz
TDP 300 W
BUS WIDTH 384 bit
ARCHITECTURE Blackwell 2.0
nm
PROCESS 5 nm
LAUNCH DATE 2025

PERFORMANCE BENCHMARKS

geekbench_metal
21,018
N/A
geekbench_opencl
17,642
N/A
geekbench_vulkan
18,703
N/A
passmark_directx_10
16
175
passmark_directx_11
24
219
passmark_directx_12
22
78
passmark_directx_9
56
311
passmark_g2d
646
914
passmark_g3d
3,699
24,310
passmark_gpu_compute
1,475
15,667
3dmark_3dmark_steel_nomad_dx12
N/A
9,579.5

Analysis: AMD Radeon Pro WX 4100 vs NVIDIA RTX PRO 5000 72 GB Blackwell

NVIDIA’s RTX PRO 5000 72 GB Blackwell and AMD’s Radeon Pro WX 4100 occupy opposite ends of the workstation spectrum, and the benchmark data reflects a decisive performance gap. The RTX PRO 5000 wins all seven head-to-head comparisons, with margins ranging from 41.5% to 993.8%. The largest single win comes in Passmark DirectX 10, where the NVIDIA card scores 175 versus 16 for the AMD, a 993.8% advantage. That pattern repeats across every DirectX test: DirectX 11 shows 219 versus 24 (812.5% delta), DirectX 9 shows 311 versus 56 (455.4%), and DirectX 12 shows 78 versus 22 (254.5%). These are not close contests; the NVIDIA part leads by multiple factors in every graphics API workload captured.

The most significant aggregate result is Passmark G3D, where the RTX PRO 5000 scores 24,310 against 3,699 for the WX 4100, a 557.2% delta. Compute performance follows a similar trajectory: Passmark GPU Compute shows 15,667 versus 1,475, a 962.2% delta. Even in 2D performance, where workstation cards often converge, the NVIDIA part leads with 914 versus 646, a 41.5% margin. The average benchmark score for the RTX PRO 5000 is 6,407, while the WX 4100 averages 6,330 — a surprisingly narrow aggregate gap given the individual test results, explained by the fact that the NVIDIA card’s highest-scoring tests are not included in the average calculation used here, while the AMD card’s Geekbench scores (21,018 Metal, 17,642 OpenCL, 18,703 Vulkan) are not part of the head-to-head set.

Head-to-Head Benchmarks

The data shows a categorical sweep, but the magnitude varies by workload. In Passmark DirectX 10, the RTX PRO 5000’s 175 points dwarf the WX 4100’s 16, yielding a 993.8% delta — the largest margin in the comparison. DirectX 11 is nearly as lopsided: 219 versus 24, an 812.5% delta. These legacy API tests highlight the generational gulf between the two architectures, as the NVIDIA card’s Blackwell design handles even older DirectX paths with orders-of-magnitude more throughput.

DirectX 12 narrows the relative gap but not the outcome. The RTX PRO 5000 scores 78, the WX 4100 scores 22, a 254.5% delta. DirectX 9 shows 311 versus 56, a 455.4% delta. The 3D gaming-style workload in Passmark G3D shows 24,310 versus 3,699, a 557.2% delta — the largest absolute point difference in the set. Compute performance is similarly dominant: 15,667 versus 1,475, a 962.2% delta. The only single-digit multiple is 2D performance, where 914 beats 646 by 41.5%, but even that is a clear win. In every test, the NVIDIA card’s score exceeds the AMD card’s score by at least 254.5%, with most margins in the 400–1000% range.

Where Each One Wins

The RTX PRO 5000 wins every benchmark category in the head-to-head set, so the use-case split is not about which card wins a given test but rather about which workloads see the most extreme gaps. The NVIDIA card’s 962.2% compute advantage and 557.2% G3D advantage make it the clear choice for GPU-accelerated rendering, simulation, and any 3D-heavy professional workflow. The 993.8% DirectX 10 and 812.5% DirectX 11 margins suggest that legacy CAD or OpenGL-based applications will see massive uplift on the NVIDIA card.

The WX 4100 has no benchmark wins to claim. Its only competitive showing is in Passmark G2D, where the 41.5% delta is the smallest of the set — but it still loses. For users constrained to 2D desktop workloads or lightweight visualization, the WX 4100’s 50 W TDP and single-slot design offer a power-efficient footprint, but the data shows no performance scenario where it leads. The AMD card does have Geekbench scores (21,018 Metal, 17,642 OpenCL, 18,703 Vulkan) that are not part of the head-to-head set, but these do not appear in the comparative analysis. Benchmark results indicate that the RTX PRO 5000 is the sole performance option in this pairing.

Architecture Differences

The two cards come from different eras and process nodes. The RTX PRO 5000 uses NVIDIA’s GB202 chip on a 5 nm TSMC process, packing 92,200 million transistors on a 750 mm² die. The WX 4100 uses AMD’s Baffin chip on a 14 nm GlobalFoundries process, with 3,000 million transistors on a 123 mm² die. Transistor density tells the story: 122.9 million per mm² for the NVIDIA card versus 24.4 million per mm² for the AMD card. The Blackwell 2.0 architecture supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, while GCN 4.0 supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3.

Memory configurations diverge sharply. The RTX PRO 5000 has 72 GB of GDDR7 on a 384-bit bus, delivering 1.34 TB/s bandwidth. The WX 4100 has 4 GB of GDDR5 on a 128-bit bus, with 96.00 GB/s bandwidth. The NVIDIA card’s memory clock is 1750 MHz (28 Gbps effective) versus 1500 MHz (6 Gbps effective) for the AMD card. Shader resources are equally lopsided: 14,080 shading units, 440 TMUs, 160 ROPs, 110 RT cores, and 440 tensor cores for the NVIDIA card, versus 1,024 shading units, 64 TMUs, and 16 ROPs for the AMD card, which has no RT or tensor cores. Pixel rate is 380.3 GPixel/s versus 19.22 GPixel/s; texture rate is 1,045.9 GTexel/s versus 76.86 GTexel/s. FP32 compute is 66.94 TFLOPS versus 2.460 TFLOPS, both with 1:1 FP16.

Power and physical design also differ. The RTX PRO 5000 draws 300 W, requires a 700 W suggested PSU, uses a 16-pin connector, and is dual-slot. The WX 4100 draws 50 W, suggests a 250 W PSU, has no power connector, and is single-slot. The NVIDIA card measures 267 mm by 111 mm by 40 mm; the AMD card measures 168 mm by 69 mm. Bus interfaces are PCIe 5.0 x16 versus PCIe 3.0 x8. Display outputs are 4x DisplayPort 2.1b versus 4x mini-DisplayPort 1.4a.

FAQ

Q: How much faster is the RTX PRO 5000 in Passmark G3D?

A: The RTX PRO 5000 scores 24,310 versus 3,699 for the WX 4100, a 557.2% delta.

Q: Does the WX 4100 win any head-to-head benchmark?

A: No. The RTX PRO 5000 wins all seven head-to-head tests, with the smallest margin being 41.5% in Passmark G2D.

Q: What is the memory bandwidth difference?

A: The RTX PRO 5000 has 1.34 TB/s bandwidth from 72 GB GDDR7 on a 384-bit bus; the WX 4100 has 96.00 GB/s from 4 GB GDDR5 on a 128-bit bus.

Q: Which card has more shading units?

A: The RTX PRO 5000 has 14,080 shading units; the WX 4100 has 1,024.

Q: What are the process node and transistor counts?

A: The RTX PRO 5000 is on TSMC 5 nm with 92,200 million transistors; the WX 4100 is on GlobalFoundries 14 nm with 3,000 million transistors.

Q: What is the FP32 compute throughput for each?

A: The RTX PRO 5000 delivers 66.94 TFLOPS; the WX 4100 delivers 2.460 TFLOPS.

The Verdict

The data is unambiguous: the RTX PRO 5000 72 GB Blackwell is the superior performer in every head-to-head metric, with margins from 41.5% to 993.8%. Any professional workload that benefits from higher 3D scores, compute throughput, or memory bandwidth should choose the NVIDIA card. Its 72 GB GDDR7 memory and 1.34 TB/s bandwidth provide a scale of memory capacity that the WX 4100’s 4 GB GDDR5 cannot approach. The NVIDIA card’s 66.94 TFLOPS FP32 compute versus 2.460 TFLOPS makes it suitable for compute-heavy tasks, while the WX 4100’s 2.460 TFLOPS is suited only for light or legacy workloads.

The WX 4100’s advantages are limited to physical attributes: 50 W TDP, single-slot, no power connector, and a 250 W suggested PSU. For systems with strict power or space constraints, that may be relevant, but the benchmark data shows no performance justification. The RTX PRO 5000 is the clear pick for any user prioritizing raw performance, modern API support (DirectX 12 Ultimate, Vulkan 1.4), or large-memory workloads. The WX 4100 is end-of-life, while the RTX PRO 5000 is active production. The verdict from the data: choose the RTX PRO 5000 unless the workload is purely 2D and power efficiency is the sole criterion.

Specification Differences

| Field | NVIDIA RTX PRO 5000 72 GB Blackwell | AMD Radeon Pro WX 4100 |

|-------|-------------------------------------|-------------------------|

| Chip | GB202 | Baffin |

| Architecture | Blackwell 2.0 | GCN 4.0 |

| Process Node | 5 nm | 14 nm |

| Transistors | 92,200 million | 3,000 million |

| Die Size | 750 mm² | 123 mm² |

| Transistor Density | 122.9M / mm² | 24.4M / mm² |

| Base Clock | 1740 MHz | 1125 MHz |

| Boost Clock | 2377 MHz | 1201 MHz |

| Memory Clock | 1750 MHz (28 Gbps effective) | 1500 MHz (6 Gbps effective) |

| Memory Size | 72 GB | 4 GB |

| Memory Type | GDDR7 | GDDR5 |

| Memory Bus Width | 384 bit | 128 bit |

| Memory Bandwidth | 1.34 TB/s | 96.00 GB/s |

| Shading Units | 14080 | 1024 |

| TMUs | 440 | 64 |

| ROPs | 160 | 16 |

| RT Cores | 110 | None |

| Tensor Cores | 440 | None |

| Pixel Rate | 380.3 GPixel/s | 19.22 GPixel/s |

| Texture Rate | 1,045.9 GTexel/s | 76.86 GTexel/s |

| FP32 | 66.94 TFLOPS | 2.460 TFLOPS |

| FP16 | 66.94 TFLOPS (1:1) | 2.460 TFLOPS (1:1) |

| TDP | 300 W | 50 W |

| Slot Width | Dual-slot | Single-slot |

| Power Connectors | 1x 16-pin | None |

| Suggested PSU | 700 W | 250 W |

| Bus Interface | PCIe 5.0 x16 | PCIe 3.0 x8 |

| Display Outputs | 4x DisplayPort 2.1b | 4x mini-DisplayPort 1.4a |

| DirectX | 12 Ultimate (12_2) | 12 (12_0) |

| OpenGL | 4.6 | 4.6 |

| Vulkan | 1.4 | 1.3 |

| Length | 267 mm (10.5 inches) | 168 mm (6.6 inches) |

| Height | 111 mm (4.4 inches) | 69 mm (2.7 inches) |

| Width | 40 mm (1.6 inches) | Not specified |

| Production Status | Active | End-of-life |

| Release Date | 2025-10-20 | 2016-11-09 |

| Predecessor | Workstation Ada | Radeon Pro GCN |

| Successor | None | Radeon Pro Vega |

| Launch MSRP | Not specified | 399 USD |

DETAILED SPECIFICATIONS

SPECIFICATION
Pro WX 4100
RTX PRO 5000 72 GB Blackwell
Core Specs
Shading Units
1,024
14,080 +1275.0%
Shaders
1,024
14,080 +1275.0%
TMUs
64
440 +587.5%
ROPs
16
160 +900.0%
Compute Units
16
—
SM Count
—
110
Clocks
Base Clock
1125 MHz
1740 MHz
Boost Clock
1201 MHz
2377 MHz
Memory Clock
1500 MHz 6 Gbps effective
1750 MHz 28 Gbps effective
Memory
Memory Size
4 GB
72 GB
VRAM (MB)
4,096
73,728 +1700.0%
Memory Type
GDDR5
GDDR7
Memory Bus
128 bit
384 bit
Bandwidth
96.00 GB/s
1.34 TB/s
Cache
L1 Cache
16 KB (per CU)
128 KB (per SM)
L2 Cache
1024 KB
96 MB
Performance
Pixel Rate
19.22 GPixel/s
380.3 GPixel/s
Texture Rate
76.86 GTexel/s
1,045.9 GTexel/s
FP32 (TFLOPS)
2.460 TFLOPS
66.94 TFLOPS
FP64 (TFLOPS)
153.7 GFLOPS (1:16)
1,045.9 GFLOPS (1:64)
FP16 (TFLOPS)
2.460 TFLOPS (1:1)
66.94 TFLOPS (1:1)
AI/RT
RT Cores
—
110
Tensor Cores
—
440
Power
TDP
50 W
300 W
TDP (W)
50
300 +500.0%
Suggested PSU
250 W
700 W
Power Connectors
None
1x 16-pin
Architecture
Architecture
GCN 4.0
Blackwell 2.0
GPU Name
Baffin
GB202
Generation
Radeon Pro Polaris (WX x100)
Blackwell PRO W (x000)
Process Size
14 nm
5 nm
Transistors
3,000 million
92,200 million
Die Size
123 mm²
750 mm²
Foundry
GlobalFoundries
TSMC
Density
24.4M / mm²
122.9M / mm²
API Support
DirectX
12 (12_0)
12 Ultimate (12_2)
OpenGL
4.6
4.6
Vulkan
1.3
1.4
OpenCL
2.1
3.0
CUDA
—
12.0
Shader Model
6.7
6.9
Physical
Slot Width
Single-slot
Dual-slot
Length
168 mm 6.6 inches
267 mm 10.5 inches
Height
69 mm 2.7 inches
111 mm 4.4 inches
Outputs
4x mini-DisplayPort 1.4a
4x DisplayPort 2.1b
Bus Interface
PCIe 3.0 x8
PCIe 5.0 x16
Other
Launch Price
399 USD
—
Production
End-of-life
Active
Predecessor
Radeon Pro GCN
Workstation Ada
Successor
Radeon Pro Vega
—
View Radeon Pro WX 4100 Details View RTX PRO 5000 72 GB Blackwell Details