AMD Radeon Pro WX 4100 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102 Comparison
AMD Radeon Pro WX 4100
GeForce RTX 4070 Ti SUPER AD102
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro WX 4100 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
# AMD Radeon Pro WX 4100 vs NVIDIA GeForce RTX 4070 Ti SUPER AD102
The AMD Radeon Pro WX 4100 and NVIDIA GeForce RTX 4070 Ti SUPER AD102 are separated by nearly eight years of GPU architecture evolution, yet their average benchmark scores land surprisingly close: the WX 4100 averages 6,330 points across its full benchmark suite, while the RTX 4070 Ti SUPER AD102 averages 6,270 points from a single 3DMark Steel Nomad DX12 run. However, this aggregate parity masks a stark reality — the two cards target entirely different workloads, with the professional Polaris card relying on legacy API tests while the Ada Lovelace giant excels in modern DirectX 12 rendering. The data shows the RTX 4070 Ti SUPER AD102 delivers roughly 18x the raw FP32 compute (44.10 TFLOPS vs 2.460 TFLOPS), yet its percentile ranking among all GPUs is only 36th, one point below the WX 4100's 37th percentile, illustrating how benchmark selection dramatically shapes perceived performance.
Head-to-Head Benchmarks
The head-to-head benchmark table is empty, meaning no direct comparative test scores exist between these two products. Instead, the nearest-rival analysis reveals where each card sits relative to comparable hardware. The WX 4100's average score of 6,330 places it within 0.1% of the AMD Radeon R7 M350 (6,327) and 0.8% above the NVIDIA Quadro K620 (6,282), while trailing the NVIDIA GeForce GTX 460 SE and GTX 580M (both 6,389) by 0.9%. This clustering within a 107-point band shows the WX 4100 is firmly a mid-range performer from its era, with its best showing in PassMark G3D (3,699) and a G2D score of 646, while its compute score of 1,475 and DirectX 10/11/12 scores of 16, 24, and 22 respectively reveal modest API-specific capabilities.
The RTX 4070 Ti SUPER AD102, by contrast, posts a 3DMark Steel Nomad DX12 score of 6,269.5, which is statistically identical (0.0% delta) to the NVIDIA GeForce RTX 5070 Ti SUPER's 6,270 average. Its nearest rivals include the NVIDIA Quadro K620 (6,282, -0.2%), the AMD FirePro W600 (6,223, +0.8%), and the AMD Radeon R7 M350 (6,327, -0.9%). The RTX card's single benchmark score places it in a dead heat with these older or lower-tier products, despite its massive hardware advantage, because Steel Nomad is a modern, demanding test that these legacy cards were never designed to run at competitive levels.
When interpreting these numbers, the crucial insight is that the WX 4100's 2.460 TFLOPS FP32 throughput and 96 GB/s memory bandwidth are sufficient for its vintage DirectX 9-12 workloads, while the RTX 4070 Ti SUPER AD102's 44.10 TFLOPS and 672.3 GB/s bandwidth are aimed at ray-traced, tensor-accelerated applications that simply did not exist in the WX 4100's 2016 context. The average benchmark scores are functionally incomparable across such different test suites; the RTX card's 6,270 average from one test cannot be directly weighed against the WX 4100's 6,330 average from ten tests spanning four API generations.
Where Each One Wins
The WX 4100 wins decisively in legacy API scenarios. Its PassMark DirectX 9 score of 56 far exceeds its own DirectX 10 (16), DirectX 11 (24), and DirectX 12 (22) results, indicating the card was optimized for older workstation applications common in 2016. Its G2D score of 646 suggests capable 2D desktop and CAD-like rendering performance, while its 37th percentile ranking across all GPUs means it outperforms roughly 37% of the graphics hardware database — a respectable position for a card with 4 GB GDDR5 memory and a 128-bit bus.
The RTX 4070 Ti SUPER AD102 wins categorically in modern 3D workloads. Its 3DMark Steel Nomad DX12 score of 6,269.5, achieved at 4K-equivalent settings, demonstrates that it can handle contemporary game engines and DirectX 12 Ultimate features (12_2) that the WX 4100 cannot even claim (12_0). The NVIDIA card's 66 ray-tracing cores and 264 tensor cores provide hardware acceleration for ray-traced lighting and DLSS-style AI upscaling — capabilities entirely absent from the WX 4100, which has no RT or tensor cores. For users running current 3D applications, the RTX card's 16 GB GDDR6X memory and 256-bit bus (672.3 GB/s) versus the WX 4100's 4 GB GDDR5 and 128-bit bus (96 GB/s) represent a 7x memory bandwidth advantage that directly translates to texture-heavy and high-resolution performance.
In compute workloads, the data is unambiguous: the RTX 4070 Ti SUPER AD102's 44.10 TFLOPS FP32 and FP16 (1:1) rates are approximately 18x the WX 4100's 2.460 TFLOPS. The RTX card's texture rate of 689.0 GTexel/s and pixel rate of 250.6 GPixel/s dwarf the WX 4100's 76.86 GTexel/s and 19.22 GPixel/s, respectively. The WX 4100's only compute advantage is its 50 W TDP versus 285 W, making it suitable for low-power or passively cooled environments, but this efficiency comes at the cost of any meaningful modern compute throughput.
Architecture Differences
The WX 4100 is built on AMD's GCN 4.0 architecture, fabricated on a 14 nm process at GlobalFoundries, with 3,000 million transistors packed into a 123 mm² die (24.4M transistors per mm²). Its Baffin chip features 1,024 shading units, 64 texture mapping units, and 16 ROPs, with a base clock of 1125 MHz and boost clock of 1201 MHz. Memory runs at 1500 MHz (6 Gbps effective) across a 128-bit bus, yielding 96 GB/s bandwidth. The card supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, and connects via PCIe 3.0 x8. Its 4 GB GDDR5 frame buffer is modest by any standard, and the card is single-slot with no power connectors, drawing just 50 W.
The RTX 4070 Ti SUPER AD102 uses NVIDIA's Ada Lovelace architecture on a 5 nm TSMC process, with 76,300 million transistors on a 609 mm² die (125.3M per mm²) — a transistor density over 5x higher than the WX 4100. The AD102 chip contains 8,448 shading units, 264 TMUs, 96 ROPs, 66 RT cores, and 264 tensor cores, running at a base clock of 2340 MHz and boost of 2610 MHz. Memory is 16 GB of GDDR6X at 1313 MHz (21 Gbps effective) on a 256-bit bus, delivering 672.3 GB/s. It supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4, and uses PCIe 4.0 x16. The card is triple-slot with a single 16-pin power connector and a 285 W TDP.
Key architectural gaps: the WX 4100 lacks RT and tensor cores entirely, while the RTX card has 66 and 264 respectively. The WX 4100's FP16 performance is equal to FP32 (1:1), but without tensor cores it cannot accelerate AI workloads; the RTX card's tensor cores enable transformer-based features. The process node difference (14 nm vs 5 nm) explains the massive transistor density disparity, and the memory technology (GDDR5 vs GDDR6X) accounts for the 7x bandwidth gap. The WX 4100's 16 ROPs versus 96 ROPs on the RTX card limits its fill-rate-bound performance, while the 264 TMUs versus 64 means the NVIDIA card can sustain far more complex texture filtering.
FAQ
Q: Which card has a higher average benchmark score?
A: The AMD Radeon Pro WX 4100 averages 6,330 points across ten tests, while the NVIDIA GeForce RTX 4070 Ti SUPER AD102 averages 6,270 points from a single 3DMark Steel Nomad DX12 test — a 60-point difference (0.95%) favoring the older AMD card, though the test suites are entirely different.
Q: What is the memory capacity and bandwidth difference?
A: The WX 4100 has 4 GB GDDR5 on a 128-bit bus providing 96.00 GB/s, while the RTX 4070 Ti SUPER AD102 has 16 GB GDDR6X on a 256-bit bus providing 672.3 GB/s — a 4x capacity and 7x bandwidth advantage for the NVIDIA card.
Q: Do both cards support ray tracing?
A: No. The RTX 4070 Ti SUPER AD102 has 66 dedicated RT cores and supports DirectX 12 Ultimate (12_2), while the WX 4100 has no RT cores and only supports DirectX 12 (12_0), meaning no hardware-accelerated ray tracing.
Q: How do their power requirements compare?
A: The WX 4100 draws 50 W with no power connectors and a 250 W suggested PSU, while the RTX 4070 Ti SUPER AD102 draws 285 W via a single 16-pin connector and requires a 600 W PSU — a 235 W difference in TDP.
Q: What is the release date gap between these products?
A: The WX 4100 launched on November 9, 2016, while the RTX 4070 Ti SUPER AD102 launched on June 9, 2024 — a gap of approximately 7.5 years, corresponding to the shift from GCN 4.0 (14 nm) to Ada Lovelace (5 nm).
Q: Which card has better Vulkan support?
A: The RTX 4070 Ti SUPER AD102 supports Vulkan 1.4, while the WX 4100 supports Vulkan 1.3 — the NVIDIA card is one API version ahead, though both are functional for modern Vulkan applications.
Specification Differences
| Specification | AMD Radeon Pro WX 4100 | NVIDIA GeForce RTX 4070 Ti SUPER AD102 |
|---|---|---|
| Architecture | GCN 4.0 | Ada Lovelace |
| Process Node | 14 nm (GlobalFoundries) | 5 nm (TSMC) |
| Transistors | 3,000 million | 76,300 million |
| Die Size | 123 mm² | 609 mm² |
| Transistor Density | 24.4M / mm² | 125.3M / mm² |
| Base Clock | 1125 MHz | 2340 MHz |
| Boost Clock | 1201 MHz | 2610 MHz |
| Memory Clock | 1500 MHz / 6 Gbps effective | 1313 MHz / 21 Gbps effective |
| Memory Size | 4 GB | 16 GB |
| Memory Type | GDDR5 | GDDR6X |
| Memory Bus | 128 bit | 256 bit |
| Memory Bandwidth | 96.00 GB/s | 672.3 GB/s |
| Shading Units | 1024 | 8448 |
| TMUs | 64 | 264 |
| ROPs | 16 | 96 |
| RT Cores | None | 66 |
| Tensor Cores | None | 264 |
| Pixel Rate | 19.22 GPixel/s | 250.6 GPixel/s |
| Texture Rate | 76.86 GTexel/s | 689.0 GTexel/s |
| FP32 Performance | 2.460 TFLOPS | 44.10 TFLOPS |
| FP16 Performance | 2.460 TFLOPS (1:1) | 44.10 TFLOPS (1:1) |
| TDP | 50 W | 285 W |
| Slot Width | Single-slot | Triple-slot |
| Power Connectors | None | 1x 16-pin |
| Suggested PSU | 250 W | 600 W |
| Bus Interface | PCIe 3.0 x8 | PCIe 4.0 x16 |
| Display Outputs | 4x mini-DisplayPort 1.4a | 1x HDMI 2.1, 3x DisplayPort 1.4a |
| DirectX Support | 12 (12_0) | 12 Ultimate (12_2) |
| Vulkan Support | 1.3 | 1.4 |
| Dimensions | 168 mm x 69 mm | 310 mm x 140 mm x 61 mm |
| Release Date | 2016-11-09 | 2024-06-09 |
| Launch MSRP | 399 USD | 799 USD |
The Verdict
The data directs different buyers to different cards. Choose the AMD Radeon Pro WX 4100 if your workload is anchored to legacy professional applications: its PassMark DirectX 9 score of 56 and G2D score of 646, combined with 4 GB GDDR5 and a 50 W TDP, make it a low-power, single-slot solution for older CAD, 2D design, or multi-monitor office environments. Its 37th percentile ranking and near-parity with the Quadro K620 (0.8% ahead) confirm it competes with mid-range 2016-era workstation cards, and its PCIe 3.0 x8 interface and four mini-DisplayPort 1.4a outputs suit it to legacy multi-display setups.
Choose the NVIDIA GeForce RTX 4070 Ti SUPER AD102 if your work demands modern rendering or compute. Its 3DMark Steel Nomad DX12 score of 6,269.5, while statistically tied with the RTX 5070 Ti SUPER (0.0% delta), represents a capability the WX 4100 cannot approach in DirectX 12 Ultimate titles. The 66 RT cores and 264 tensor cores unlock ray tracing and AI acceleration that the WX 4100 lacks entirely, and the 16 GB GDDR6X frame buffer with 672.3 GB/s bandwidth handles 4K textures and large datasets. Its 44.10 TFLOPS FP32 compute is roughly 18x the WX 4100's output, making it the only choice for GPU compute, machine learning inference, or high-resolution 3D rendering — though its 285 W TDP and triple-slot footprint demand a larger chassis and 600 W PSU.
The verdict is not a contest of averages — the WX 4100's 6,330 average comes from ten legacy tests, while the RTX card's 6,270 average comes from one modern test. For any current application, the RTX 4070 Ti SUPER AD102 is categorically superior; for vintage workflows, the WX 4100 remains a functional, efficient option. The 36th percentile ranking of the RTX card is an artifact of comparing a modern flagship against a database full of older, lower-spec GPUs — its single benchmark score, while numerically close to the WX 4100's average, reflects a far more demanding test. Buy the WX 4100 for legacy compatibility, buy the RTX 4070 Ti SUPER AD102 for everything else.