AMD Radeon Pro WX 4100 vs NVIDIA GeForce GTX 675M Comparison
AMD Radeon Pro WX 4100
GeForce GTX 675M
PERFORMANCE BENCHMARKS
Analysis: AMD Radeon Pro WX 4100 vs NVIDIA GeForce GTX 675M
Head-to-Head Benchmarks
The only direct benchmark comparison available between these two cards is Geekbench OpenCL, and the result is decisive. The AMD Radeon Pro WX 4100 scores 17,642, while the NVIDIA GeForce GTX 675M scores 6,946. That is a 60.6% advantage for the AMD card, meaning the GTX 675M delivers roughly two-fifths of the Radeon Pro WX 4100’s OpenCL throughput. In absolute terms, the Radeon Pro WX 4100’s score is more than 2.5 times higher than the GeForce GTX 675M’s.
Looking at the broader benchmark landscape, the GTX 675M sits at the 39th percentile of all GPUs, with an average benchmark score of 6,946. Its nearest rivals are clustered tightly around it: the AMD Radeon R5 M240 scores 6,975 (0.4% higher), the NVIDIA GeForce GTX 680M scores 7,023 (1.1% higher), and the NVIDIA T600 scores 7,035 (1.3% higher). The only rival it beats in its immediate group is the AMD FirePro M5100, which scores 6,830, putting it 1.7% behind the GTX 675M. These figures show the GTX 675M is a mid-pack mobile part, competitive with other GPUs of its era but not a standout performer.
The Radeon Pro WX 4100, by contrast, sits at the 37th percentile of all GPUs, with an average benchmark score of 6,330. Its nearest rivals are similarly close: the AMD Radeon R7 M350 scores 6,327 (0.1% higher), the NVIDIA Quadro K620 scores 6,282 (0.8% higher), and both the NVIDIA GeForce GTX 460 SE and the NVIDIA GeForce GTX 580M score 6,389 (0.9% higher). This means the Radeon Pro WX 4100 is statistically tied with a group of older desktop and mobile cards, despite its much stronger OpenCL showing. The discrepancy between its 37th percentile ranking and its OpenCL score suggests that the OpenCL test is particularly favorable to its architecture, while other workloads may not scale as well.
The head-to-head delta of -60.6% for the GTX 675M is the single largest gap between any two cards in either card’s nearest-rival list. Even the most distant rival in the GTX 675M’s group (the FirePro M5100) is only 1.7% away, and the closest rival in the Radeon Pro WX 4100’s group is a mere 0.1% away. This makes the OpenCL result an outlier relative to the average scores, but it is still the only direct comparison available, so it carries significant weight.
Architecture Differences
The two cards come from different generations and design philosophies. The NVIDIA GeForce GTX 675M uses the GF114 chip, built on the Fermi 2.0 architecture, and falls under the GeForce 600M generation. It is manufactured by TSMC on a 40 nm process, with 1,950 million transistors packed into a 332 mm² die, yielding a transistor density of 5.9 million per square millimeter. The AMD Radeon Pro WX 4100 uses the Baffin chip, based on the GCN 4.0 architecture, and belongs to the Radeon Pro Polaris (WX x100) generation. It is built by GlobalFoundries on a 14 nm process, with 3,000 million transistors on a much smaller 123 mm² die, giving a transistor density of 24.4 million per square millimeter. The Radeon Pro WX 4100’s node advantage is clear: more than four times the transistor density, which explains how it fits a larger transistor count into less than half the die area.
Core counts differ substantially. The GTX 675M has 384 shading units, 64 texture mapping units, and 32 raster output pipelines. The Radeon Pro WX 4100 has 1,024 shading units, 64 texture mapping units, and only 16 raster output pipelines. This means the Radeon Pro WX 4100 has nearly three times the shading units, but half the ROPs. The GTX 675M’s higher ROP count gives it a pixel rate of 9.920 GPixel/s, while the Radeon Pro WX 4100 achieves 19.22 GPixel/s — the AMD card is nearly twice as fast in pixel throughput, despite fewer ROPs, because of its much higher clock speeds. Texture rate follows a similar pattern: the GTX 675M delivers 39.68 GTexel/s, while the Radeon Pro WX 4100 delivers 76.86 GTexel/s, roughly 1.9 times higher.
Clock speeds are a major differentiator. The GTX 675M has no listed base or boost clock, but its memory runs at 750 MHz (3 Gbps effective). The Radeon Pro WX 4100 has a base clock of 1125 MHz and a boost clock of 1201 MHz, with memory at 1500 MHz (6 Gbps effective). The Radeon Pro WX 4100’s memory clock is exactly double that of the GTX 675M. In terms of raw compute, the GTX 675M delivers 952.3 GFLOPS of FP32, while the Radeon Pro WX 4100 delivers 2.460 TFLOPS — a 2.6x advantage. The Radeon Pro WX 4100 also has FP16 performance at 2.460 TFLOPS (1:1), while the GTX 675M has no listed FP16 capability.
Memory configurations are similar in bandwidth but different in capacity and bus width. Both cards use GDDR5 and achieve exactly 96.00 GB/s of bandwidth. However, the GTX 675M has 2 GB on a 256-bit bus, while the Radeon Pro WX 4100 has 4 GB on a 128-bit bus. The Radeon Pro WX 4100 achieves the same bandwidth with half the bus width, thanks to its faster memory clock. API support also differs: the GTX 675M supports DirectX 12 (11_0) and OpenGL 4.6, with no Vulkan listed; the Radeon Pro WX 4100 supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3.
The Verdict
The data points to a clear winner in raw compute and modern feature support: the AMD Radeon Pro WX 4100. Its OpenCL score of 17,642 versus the GeForce GTX 675M’s 6,946 is a 60.6% gap, and its FP32 throughput of 2.460 TFLOPS dwarfs the GTX 675M’s 952.3 GFLOPS. The Radeon Pro WX 4100 also has double the memory capacity (4 GB vs 2 GB), a much smaller and more power-efficient design (50 W TDP vs 100 W), and support for Vulkan 1.3, which the GTX 675M lacks entirely. For any workload that leverages OpenCL, compute shaders, or modern APIs, the Radeon Pro WX 4100 is the better choice.
However, the GTX 675M is not without its strengths. It has a higher average benchmark score relative to its nearest rivals (6,946 vs 6,330), and it sits at a slightly higher percentile (39th vs 37th). Its 256-bit memory bus and 32 ROPs give it a different balance of capabilities, and its pixel rate, while lower than the Radeon Pro WX 4100’s, is still respectable for its era. The GTX 675M’s nearest rivals are all newer or more powerful cards (GTX 680M, T600), while the Radeon Pro WX 4100’s rivals are older or weaker (GTX 460 SE, GTX 580M, Quadro K620). This suggests the GTX 675M, despite being older, holds its own against more modern competition in average benchmarks, whereas the Radeon Pro WX 4100 does not.
Who should pick which? If the workload is OpenCL-heavy, professional compute, or modern API-based rendering, the Radeon Pro WX 4100 is the overwhelming choice. Its 4 GB memory, Vulkan support, and 2.5x OpenCL score make it suitable for tasks that the GTX 675M cannot handle efficiently. If the workload is legacy DirectX 11 or older, or if the system is constrained to an MXM module form factor, the GTX 675M may still be relevant, but the data shows it is outclassed in most measurable ways.
FAQ
Q: Which card has a higher OpenCL score?
A: The AMD Radeon Pro WX 4100 scores 17,642 in Geekbench OpenCL, while the NVIDIA GeForce GTX 675M scores 6,946, a 60.6% difference in favor of the AMD card.
Q: How do the cards compare in memory capacity?
A: The AMD Radeon Pro WX 4100 has 4 GB of GDDR5 memory, while the NVIDIA GeForce GTX 675M has 2 GB. Both have identical bandwidth at 96.00 GB/s.
Q: What is the TDP difference?
A: The AMD Radeon Pro WX 4100 has a TDP of 50 W, while the NVIDIA GeForce GTX 675M has a TDP of 100 W, making the Radeon Pro WX 4100 the more power-efficient option.
Q: Does either card support Vulkan?
A: The AMD Radeon Pro WX 4100 supports Vulkan 1.3, while the NVIDIA GeForce GTX 675M has no Vulkan support listed.
Q: Which card has more shading units?
A: The AMD Radeon Pro WX 4100 has 1,024 shading units, compared to 384 on the NVIDIA GeForce GTX 675M.
Q: What are the release dates?
A: The NVIDIA GeForce GTX 675M was released on 2012-03-21, and the AMD Radeon Pro WX 4100 was released on 2016-11-09.
Where Each One Wins
The AMD Radeon Pro WX 4100 wins decisively in compute-heavy workloads. Its OpenCL score is 60.6% higher, its FP32 throughput is 2.6x higher, and its FP16 performance is 2.460 TFLOPS, which the GTX 675M cannot match. The Radeon Pro WX 4100 also wins in texture rate (76.86 GTexel/s vs 39.68 GTexel/s), pixel rate (19.22 GPixel/s vs 9.920 GPixel/s), and memory capacity (4 GB vs 2 GB). Its 14 nm process node, 50 W TDP, and single-slot design make it a far more efficient and compact solution. It also supports Vulkan 1.3 and DirectX 12 (12_0), which the GTX 675M’s DirectX 12 (11_0) cannot fully match.
The NVIDIA GeForce GTX 675M wins in a few specific areas. It has a larger memory bus (256-bit vs 128-bit), which can be an advantage in certain bandwidth-sensitive legacy workloads. It has more ROPs (32 vs 16), which historically helps with fill-rate-bound scenarios, although its pixel rate is still lower due to clock differences. Its average benchmark score of 6,946 is higher than the Radeon Pro WX 4100’s 6,330, and it sits at a higher percentile (39th vs 37th). Its nearest rivals are generally stronger cards (GTX 680M, T600), suggesting it compares better against its contemporaries than the Radeon Pro WX 4100 does against its own.
Specification Differences
| Specification | NVIDIA GeForce GTX 675M | AMD Radeon Pro WX 4100 |
|---|---|---|
| Architecture | Fermi 2.0 | GCN 4.0 |
| Process Node | 40 nm | 14 nm |
| Foundry | TSMC | GlobalFoundries |
| Transistors | 1,950 million | 3,000 million |
| Die Size | 332 mm² | 123 mm² |
| Transistor Density | 5.9M / mm² | 24.4M / mm² |
| Base Clock | Not listed | 1125 MHz |
| Boost Clock | Not listed | 1201 MHz |
| Memory Clock | 750 MHz (3 Gbps effective) | 1500 MHz (6 Gbps effective) |
| Memory Size | 2 GB | 4 GB |
| Memory Bus Width | 256 bit | 128 bit |
| Shading Units | 384 | 1,024 |
| ROPs | 32 | 16 |
| Pixel Rate | 9.920 GPixel/s | 19.22 GPixel/s |
| Texture Rate | 39.68 GTexel/s | 76.86 GTexel/s |
| FP32 | 952.3 GFLOPS | 2.460 TFLOPS |
| FP16 | Not listed | 2.460 TFLOPS (1:1) |
| TDP | 100 W | 50 W |
| Slot Width | MXM Module | Single-slot |
| Suggested PSU | Not listed | 250 W |
| Bus Interface | MXM-B (3.0) | PCIe 3.0 x8 |
| Display Outputs | Portable Device Dependent | 4x mini-DisplayPort 1.4a |
| DirectX Support | 12 (11_0) | 12 (12_0) |
| Vulkan Support | Not listed | 1.3 |
| Release Date | 2012-03-21 | 2016-11-09 |